• 한국정밀공학회지
• /
• 제30권5호
• /
• pp.520-528
• /
• 2013

A 20 mm diameter of small 5-D.O.F. force sensor has been developed for applications in MR-field Optical intensity modulation was adopted for transducing to miniaturize the sensor structure. For its accurate sensing of 5-D.O.F. force/moment, the elastic detecting module was designed to respond independently to each force or moment component. And for small size, two optical transducing modules of 2-D.O.F. and 3-D.O.F. were designed and integrated with the detecting module where optical fibers were arranged in parallel to make the sensor small. It is confirmed by calibration test that the detecting modules deforms linearly and independently to the input force. The results of evaluating test show that the range and resolution of forces are ${\pm}4$ N and 0.94~7.1 mN and the range and resolution of moments are ${\pm}120N{\cdot}mm$ and $0.023{\sim}0.034N{\cdot}mm$.

• 한국자동차공학회논문집
• /
• 제5권6호
• /
• pp.202-214
• /
• 1997

In automotive industries, one of major issues is the shifting shock, which is brought out when two clutches are engaged in an automatic transmission. The engagement and disengagement if two clutches means the variation of the D.O.F(degree of freedom) of system. Therefore to analyze the shifting performance, the variation of D.O.F should be considered in detail. Generally, the programs for analyzing the shifting transients have been developed as the problem-dependent codes because the artificial maris were usually used to indicate the change of shifting phase. To develop a software applicable to a general mechanism of transmissions, a self-determining algorithm of D.O.F must be applied. Through the experiences for the last several years, a generalized analysis software of shifting mechanism(so called by POTAS-MSM Version 2.0) has been developed. In this study, some major ideas of the software and the concept for the analysis of shifting characteristics are presented. In addition to that, this paper shows how to self -determine D.O.F of he multi-slipping systems using the stick-slip criterion on a single slipping mechanism. By using this software, the shifting characteristics of a vehicle are analyzed and compared with the experimental results.

• 한국결정성장학회지
• /
• 제19권3호
• /
• pp.130-134
• /
• 2009

새로운 $CaZrO_3$, 축광성 형광체를 고온의 약한 환원 분위기에서 전통적인 고상반응법으로 합성하였다 광발광 분석 결과 $Tb^{3+}$ 이온을 첨가한 $CaZrO_3$ 축광성 형광체는 $^5D_3$, $^5D_4$ 에너지 준위에서 $^7F_1{\sim}^7F_6$ 준위로의 전이에 의해 황녹색의 발광을 나타내며, 고온의 질소분위기에서 합성한 경우의 축광성 형광체에 대한 스펙트럼의 주 피크는 $^5D_4{\rightarrow}^7F_5$ 전이에 의한 542 nm의 발광 피크가 생성되었다. $CaZrO_3:Tb^{3+}$ 축광성 형광체의 잔광 발광 스펙트럼은 좁은 영역의 546 nm의 피크가 강하게 생성되었다 잔광 휘도는 254 nm 자외선을 조사하고 전원을 끈 후에 측정하였으며, 녹황색의 축광성 형광체가 사람이 어두운 곳에서 인지 가능한 $0.32\;mcd/m^2$까지 8시간 지속됨을 관찰하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 가을 학술발표회 논문집
• /
• pp.258-265
• /
• 1998

Application of the flat shell element with drilling D.O.F to linear buckling analysis of thin-walled structures is presented in this paper. The shell element has been developed basically by combining a membrane element with drilling D.O.F. and Mindlin plate bending element. Thus, the shell element possesses six degrees-of-freedom per node which, in addition to improvement of the element behavior, permits an easy connection to other six degrees-of-freedom per node elements(CLS, Choi and Lee, 1995). Accordingly, structures like folded plate and stiffened shell structure, for which it is hard to find the analytical solutions, can be analyzed using these developed flat shell elements. In this paper, linear buckling analysis of thin-walled structures like folded plate structures using the shell elements(CLS) with drilling D.O.F. to be formulated and then fulfilled. Subsequently, buckling modes and the critical loads can be output. Finally. finite element solutions for linear buckling analysis of folded plate structures are compared with available analytic solutions and other researcher's results.

• Journal of Mechanical Science and Technology
• /
• 제16권5호
• /
• pp.732-742
• /
• 2002

This paper presents twin spray characteristics of two impinging F-O-O-F type injectors in which fuel and oxidizer impinge on each other to atomize under the various conditions. The droplet size and velocity in the impinging spray flow field were measured using PDPA. The droplet size and velocity were investigated at the mixture ratios of 1.5, 2.0, 2.47 and 3.0 for four injectors in which two single F-O-O-F injectors were arranged at the intervals of 20.8, 31.2, 41.6 and 62.4mm respectively. In general, the arithmetic mean diameter, SMD and standard deviation of droplet size in the interaction area (X=0 and Y=0mm) were smaller, while the axial velocity in the interaction area was slightly higher. An empirical correlation is obtained for the (D$\_$10/)$\_$D//(D$\_$10/)$\_$c/ value under the assumptions of two identical droplets and these with different size and velocity. The droplets with low Weber numbers below 40 have possibility to coalesce, while those over 40 tend to disintegrate after impingement in the interaction area.

• 대한수학회보
• /
• 제52권5호
• /
• pp.1559-1568
• /
• 2015

The relative class number $H_d(f)$ of a real quadratic field $K=\mathbb{Q}(\sqrt{m})$ of discriminant d is the ratio of class numbers of $O_f$ and $O_K$, where $O_K$ denotes the ring of integers of K and $O_f$ is the order of conductor f given by $\mathbb{Z}+fO_K$. In a recent paper of A. Furness and E. A. Parker the relative class number of $\mathbb{Q}(\sqrt{m})$ has been investigated using continued fraction in the special case when $(\sqrt{m})$ has a diagonal form. Here, we extend their result and show that there exists a conductor f of relative class number 1 when the continued fraction of $(\sqrt{m})$ is non-diagonal of period 4 or 5. We also show that there exist infinitely many real quadratic fields with any power of 2 as relative class number if there are infinitely many Mersenne primes.

• The Korean Journal of Ceramics
• /
• 제4권3호
• /
• pp.204-206
• /
• 1998

The Gibbs free energy of formation of $BaThO_3$ from elemental oxides has been measured at temperatures between 853 and 903 K using a $CaF_2$ solid electrolyte galvanic cell. The galvanic cell consisted of Pt, $O_2, CaO+CaF_2 \parallel CaF_2 \parallelBaThO_3+ThO_2+BaF_2, O_2$, Pt EMF gave the standard Gibbs free energy for the reaction $CaF_2+BaThO_3=CaO+BaF_2+ThO_3$ as $\DeltaG^o$,/TEX>=124111.031-117.597 T(J/mol).

• 한국자기학회지
• /
• 제13권1호
• /
• pp.36-40
• /
• 2003

D $y_{x}$B $i_{3-x}$F $e_{5}$ $O_{12}$(x=0.5,1.0,1.5,2.0) 가네트 박막을 sol-gel법의 일종인 Pechini법의 이용하여 $Al_2$ $O_3$, G $d_3$G $a_{5}$ $O_{12}$ (111) 평면에 성장시켰다. 단일 조성의 D $y_{x}$B $i_{3-x}$F $e_{5}$ $O_{12}$ 박막을 얻기 위한 열처리 온도는 기판의 종류에 의존하며, 박막과 같은 구조의 G $d_3$G $a_{5}$ $O_{12}$ (111) 기판의 경우 A1$_2$ $O_3$ 기판을 사용한 경우에 비해 단일 조성을 얻기 위한 열처리 온도가 약 5$0^{\circ}C$ 감소함을 알 수 있었다. G $d_3$G $a_{5}$ $O_{12}$ (111) 기판 위에 성장된 가네트 박막의 낟알들은 대부분 기판과 같은 [111] 방향으로 정렬하며, 이 경우 박막의 자기 이력 곡선은 5000 Oe 이상에서도 포화 자기화에 도달하지 못하는 것으로 확인되었다. 이러한 현상의 원인으로 회전 자기화 과정 (rotation magnetization process)에 의한 것으로 추정하였다. Pechini 법으로 성장시킨 D $y_{x}$B $i_{3-x}$F $e_{5}$ $O_{12}$ 박막에서 단위 세포 당 최대 Bi 이온의 양은 2.0 이하임을 처음으로 확인하였고, 이는 LPE법에 의해 성장된 단결정 가네트의 경우에 알려진 최대 Bi이온의 양 2.3보다 작은 값이다.에 알려진 최대 Bi이온의 양 2.3보다 작은 값이다.은 값이다.

• Kyungpook Mathematical Journal
• /
• 제50권1호
• /
• pp.37-47
• /
• 2010

In this present work, the authors obtain Fekete-Szeg$\ddot{o}$ inequality for certain normalized analytic function f(z) defined on the open unit disk for which $\frac{(1-{\alpha})z(D^m_{{\lambda},{\mu}}f(z))'+{\alpha}z(D^{m+1}_{{\lambda},{\mu}}f(z))'}{(1-{\alpha})D^m_{{\lambda},{\mu}}f(z)+{\alpha}D^{m+1}_{{\lambda},{\mu}}f(z)}$ ${\alpha}{\geq}0$) lies in a region starlike with respect to 1 and is symmetric with respect to the real axis. Also certain applications of the main result for a class of functions defined by Hadamard product (or convolution) are given. As a special case of this result, Fekete-Szeg$\ddot{o}$ inequality for a class of functions defined through fractional derivatives is obtained. The motivation of this paper is to generalize the Fekete-Szeg$\ddot{o}$ inequalities obtained by Srivastava et al., Orhan et al. and Shanmugam et al., by making use of the generalized differential operator $D^m_{{\lambda},{\mu}}$.

• 대한화학회지
• /
• 제55권3호
• /
• pp.405-411
• /
• 2011

Methyl hydro-peroxide의 methyl group과 O-H에 F를 치환 시킨 fluoromethyl fluoroperoxide($CH_nF_{3-n}OOF$)의 안정한 conformers와 isomers에 대하여 MP2/6-311G(d,p) 방법과 B3LYP/6-311++G(d,p) 방법으로 최적화 계산을 수행하였고 vibrational frequencies를 구하였다. $CH_3OOF$와 $CH_2FOOF$, $CHF_2OOF$, $CF_3OOF$ 분자 모두 가장 안정한 형태는 skew 구조로 나타났으며 $CH_3OOH$와 비교할 때 대단히 짧은 O-O 결합길이를 갖는다. Trans, cis conformers의 경우 skew 형태보다 8-12 kcal/mol 정도 높은 에너지를 갖으며 O-O 결합길이는 훨씬 길어진다. $CH_2FOOF$, $CHF_2OOF$, $CF_3OOF$ 분자들은 methyl group의 F에 의한 induction 효과로 짧은 C-O 결합길이를 갖고 O-F 결합길이는 길어지나 치환된 F 원자의 수에 따른 구조변화는 그리 크지 않다.