This 3-year-old girl was observed frequent exertional dyspnea and cyanosis at crying since birth. She was not premature baby and delivered at full term normally. On physical examination, she was underdeveloped-body weight 13.5 kg, height 99 cm.- and cyanotic. There was severe clubbing on fingers. There was grade II/VI ejection systolic murmur on left lateral border of the sternum. The preoperative examinations [EKG, echocardiogram, cardiac catheterization and biventriculogram] showed that complicated T.G.A. combined vena cava[S.D.D.]. Preoperatively, we decided the corrective surgery of Rastelli operation using a. pulmonary valved conduit. The operation was performed under total circulatory arrest using deep profound hypothermia combining with extracorporeal circulation. On operation, the anatomy of the heart showed that, 1. The subaortic conus was seen and subaortic muscles were hypertrophied. 2. The VSD[type II], behind the subaortic conus-about 1 cm. in diameter, was visible only through LV cavity and, 3. The pulmonary valve ring was hypoplastic and pulmonary valvular stenosis was seen also. The subpulmonic area [LV outflow tract] was obstructed with hypertrophied muscle and mitral valve. 4. Left superior vena cava was drained to RA via coronary sinus. 5. LAD coronary artery was originated from right coronary artery and ran anterior to the pulmonary artery. According to above anatomy, we performed the VSD closure with Teflon patch, and Mustard operation combined with LV-to-pulmonary artery bypass graft using the valve contained [Hancock 16 mm] conduit. Postoperatively, adequate blood pressure could be maintained under the state of using inotropic agent [epinephrine]. On the second postoperative day, the patient died of cardiac arrest due to low cardiac output syndrome, acute renal failure and pulmonary edema.
BACKGROUND: Bioavailability enhancement by solubilization of lipophilic drugs in nano-emulsion has been reported and it may be useful in pharmaceutical and nutraceutical products. This study was performed to compare in vivo bioavailability of nano-emulsion formulation with that of the general product as control. METHODS AND RESULTS: The pharmacokinetics assessment of Vitamin A, D and E complex of nanoemulsion formulation (LaVita), in comparison to the general product, was performed in the male rat plasma by a single oral dose at 20 mL/kg body weight (n=3/group). For nano-emulsion formulation (LaVita), $C_{max}$ of vitamin A and E in plasma were much higher and the area under the curve (AUC) of vitamin A, D and E were 14-63% higher, and the half-life of vitamin E was 2-fold longer than the general product. According to statistical analysis, each $C_{max}$ of vitamin A, D & E was significantly higher (p<0.01, 0.05 and 0.01, respectively) than that of general product. Half-life of vitamin A was significantly higher (p<0.01) and AUC of vitamin A and D were also significantly higher than the general product. CONCLUSION(s): Considering significant increment of $C_{max}$ and AUC, LaVita made of nano-emulsion could be more effective the absorption rate and extent for bioavailability of vitamin A, D & E than those of general product.
Steve An;Jane Lesleigh Evans;Stephen Hamlet;Robert Matthew Love
The Journal of Advanced Prosthodontics
/
v.15
no.4
/
pp.189-201
/
2023
PURPOSE. The aim of this study was to investigate the mechanical properties of three-dimensional (3D) printed denture base resin incorporating microcapsules containing plant essential oils. MATERIALS AND METHODS. Denture base specimens containing up to 3% w/v essential oil microcapsule powders (MCPs), i.e., eucalyptus, geranium, lavender, menthol, and tea tree, in two resins (Detax and NextDent 3D+) were 3D printed using two printers (Asiga and NextDent 5100). The dispersion and interaction of the MCPs in the resin were assessed by SEM while the mechanical properties of the incorporated denture base including flexural strength (MPa), flexural modulus (MPa), Vickers hardness (VHN), and surface roughness (Ra) were also subsequently evaluated. Statistical analysis of any differences in mean values was determined using a two-way ANOVA with Tukey's post hoc testing (α = .05). RESULTS. The spherical shape of the MCPs was maintained during the mixing and polymerization/printing process. However, the Detax-Asiga group showed significant agglomeration of the MCPs even at the lowest MCP concentration levels (0.5% w/v). Overall, as the microcapsule concentration increased, the mean flexural strength decreased, though the menthol MCP groups remained compliant with the ISO standard. The flexural modulus and harness remained relatively unchanged, and the flexural modulus complied with the ISO standard regardless of the MCP concentration. Surface roughness increased with the addition of the MCPs but also remained below that required for clinical acceptance. CONCLUSION. Incorporation of microencapsulated plant essential oils into 3D printed denture base resin was successfully achieved. While incorporation negatively influenced flexural strength and surface roughness, little effect on flexural modulus and Vickers hardness was demonstrated.
Transactions of the Korean Society of Mechanical Engineers B
/
v.36
no.3
/
pp.259-268
/
2012
This study measured the natural-convection heat transfer of two vertically staggered cylinders with varying vertical pitch-to-diameter ($P_v$/D) and horizontal pitch-to-diameter ($P_h$/D) ratios. The measured heat-transfer rates for the lower cylinder agreed well with the existing heat-transfer correlations for a single cylinder. At the smallest $P_v$/D, the rising plume from the lower cylinder provides the upper cylinder with a preheated flow, and the heat-transfer rates of the upper cylinder decrease, but increase very sensitively with $P_h$/D. However, at the largest $P_v$/D, the velocity effect dominates, and the heat-transfer rates of the upper cylinder are larger than that of a single cylinder, and decrease less sensitively with $P_h$/D. Even if $P_h$/D is increased, the heat-transfer rate of the upper cylinder is higher than that of the lower cylinder because of the chimney and side flow effects. This work expanded the flow ranges to turbulent flows. The cupric acid-copper sulfate ($H_2SO_4-CuSO_4$) electroplating system was adopted for the measurements of the mass-transfer rates instead of the heat-transfer experiments based on the analogy concept. The measurements were made by varying $P_v$/D (1.02-5) and $P_h$/D (0-2) in both laminar and turbulent flows. The Rayleigh number ranged from $1.5{\times}10^8$ to $2.5{\times}10^{10}$, and the Prandtl number was 2,014.
Journal of the Korean Society of Food Science and Nutrition
/
v.34
no.3
/
pp.351-355
/
2005
This study was performed to investigate the influences of resistant starch (HM: HI-MAIZE) and HM-D (HI-MAIZE DIET) fortified with D-factor (consisted of Psyliium husk, polydextrose and hydrocitric acid) on the glucose and bile acid absorption and production of short chain fatty acids (SCFA). HM-D absorbed more glucose and bile acid than did HM. The glucose transport of HM and HM-D against dialysis membrane showed 77% and 68% for 4h, respectively. After 24h, bile acid transport of HM and HM -D showed 65% and 62.3%, respectively. The HM and HM-D produced 217.8 mM and 264.0mM of SCFA, respectively. The production of butyric acid in HM-D (32.7mM) showed higher than that of HM (26.9mM). The addition of D-factor to HM increased the physiological function of dietary fiber through the glucose and bile acid absorption and production of SCFA.
Photoaging is the main extrinsic aging factor that is induced due to UVB. Many studies have revealed that application of hyaluronic acid to the skin is effective in healing photoaging. However, the effect of hyaluronic acid through oral administration is unclear. The aim of this research was to investigate the effect on skin photoaging after oral administration of hyaluronic acid. During a ten week study, hyaluronic acid was fed to hairless mice, which were illuminated by UV radiation. After ten weeks, wrinkle indicator and histological changes were determined. Compared with the control group, the sample group had a decrease in wrinkle depth, thickness, and number. Especially, the HA 160 mg/kg group had a similar value of wrinkle depth ($19.44{\pm}0.75{\mu}m$), number ($654.00{\pm}98.34$), and thickness ($1.35{\pm}0.08mm$), when compared with the RA (retinoic acid) group ($19.28{\pm}0.95{\mu}m$, $653.57{\pm}83.54$, and $1.34{\pm}0.07mm$ respectively). Also, the treated group showed improved elastosis and decreased collagen degradation resulting from UV irradiation. Thus, we can conclude that hyaluronic acid has a positive effect in improving skin photoaging induced by UV radiation. Hyaluronic acid therefore has the potential to be an ingredient in skin health function foods.
Proceedings of the Korean Society of Dyers and Finishers Conference
/
2012.03a
/
pp.65-65
/
2012
The air texturing공정은 노즐에서 전달되는 초음속 에어기류에 의해 overfeed를 수반하여 yarn속 fiber가 뒤얽혀 loop와 crimp를 발달시키는데, 고강력 고탄성율 고내열성 내절단성 등의 특성을 가지는 아라미드섬유를 에어 가공사로 가공 할 경우 가공 전 필라멘트 상태일 때 보다 표면에 생기는 loop로 인하여 촉감이 좋아지고 또한 타 소재와 접착 시 접착제 담지 성능이 향상 되어 접착력이 상승되고, 이를 통해 보강재로서의 기능이 강화되는 반면 역학물성이 기존의 아라미드 보다 저하되는 약점을 가지고 있어 최근 ATY 공정조건이 ATY 사의 구조와 물성변화에 미치는 영향에 대한 많은 연구결과가 발표되고 있다. 본 연구에서는 Aiki air jet texturing machine에서 $Heracron^{(R)}$ para-aramid(840, 1000d, 1500d)를 사용하여 ATY nozzle의 직경을 0.6, 0.75, 1, 1.2mm로 변화를 주어 12개의 para-aramid ATY 시료를 제조하여 이들의 섬도, 강신도, 초기탄성률, 열수축률 그리고 형태불안정성(instability)등의 물성변화를 분석하여 다음과 같은 결과를 얻었다. 노즐의 직경이 증가함에 따라 사 내의 filament간의 움직임이 자유로워 교락이 증가하고 루프가 형성되어 단위길이 당 mass가 커지므로 섬도가 미세하게 증가하는 것을 볼 수 있다. 또한 직경이 증가할수록 절단강도와 초기탄성률은 감소하고 절단신도가 증가하는 경향을 볼 수 있는데 이는 축 방향으로의 배열이 적어져 하중을 분담하는 portion이 감소하고 사의 loop형성이 많아짐으로서 상대적으로 인장력에 대응하는 fiber의 수가 적어지기 때문으로 사료된다. 이는 현미경 관찰로 확인할 수 있는데 직경이 증가함에 따라 사의 loop의 엉킴이 증가하고 filament가 조밀한 것을 확인할 수 있다. 직경 변화에 따른 건 습열 수축률은 1% 미만의 매우 낮은 값으로 영향을 받지 않는 것을 확인 할 수 있는데 para-aramid의 열적특성의 안정성에 기인하는 것으로 사료되며 ATY의 불안정성은 노즐 직경 증가에 따른 어떤 경향성을 찾아볼 수 없었지만 840d, 1000d, 1500d로 섬도가 증가함에 따라 사의 불안정성이 증가하였다.
Jeoung, See Hwa;Kim, Seung Hyung;Kim, Hyun Kyu;Yun, Bo Ra;Lee, Hee Woong;Lim, Ju Hwan;Rho, Mun Chual;Kim, Dong Hee
Journal of Physiology & Pathology in Korean Medicine
/
v.26
no.5
/
pp.665-671
/
2012
The purpose of this study is to examine the effect of Vigna angularis ethanol extract (VA-E) on papain induced arthritis in C57BL/10 mice. The C57BL/10 mice were injected with papain and oral administration of Vigna angularis ethanol extract (VA-E) at different doses (100 and 200 mg/kg) once a day for 42 days and compared with untreated mice. Histological examination and the measurement of inflammatory cytokine release were performed. The results showed that comparing with untreated mice, the treatment with Vigna angularis ethanol extract (VA-E) decreased the pathological changes of knee joint tissue. The level of inflammatory cytokine secreted from the tissues, such as IL-$1{\beta}$ (interleukin-$1{\beta}$), IL-6 (interleukin-6), TNF-${\alpha}$ (Tumor Necrosis Factor-${\alpha}$), were decreased. These results were confirmed by the quantification of cartilage volume using micro CT scanning. Consequently, Vigna angularis ethanol extract (VA-E) has a therapeutic potential in inflammatory joint diseases such as osteoarthritis.
Wilson's disease is an autosomal recessive disorder of copper metabolism consequence of which leads to accumulation of copper in the liver, brain, cornea and other tissues. The manifestations are more likely to be hepatic in the early childhood and neurological in the adolescents. In addition, the abnormalities that develop during disease progression may result in other manifestations such as hematologic, endocrine, or renal findings. We report a thirteen year-old girl who manifested tetany shortly after the initial diagnosis of Wilson's disease. Despite aggressive calcium, magnesium and vitamin D replacement, the hypocalcemia and hypomagnesemia did not respond to the therapy promptly. It took more than three weeks for blood levels of the minerals to be normal. We concluded that tetany occurred in our patient because of hypoparathyroidism as a rare complication of Wilson disease, vitamin D deficiency resulting from various conditions, and inconclusive hypomagnesemia.
Kim, Neung-Hee;Kwak, Jeong-Yeon;Kim, Hye-Ra;Park, Hyeong-Suk;Kim, Doo-Hwan;Lee, Ju-Hyung
Korean Journal of Veterinary Service
/
v.37
no.3
/
pp.197-202
/
2014
Dirofilaria immitis infection is one of the most important parasitic diseases in dogs and public health. It often elicits nodules in the pulmonary parenchyma and in the subcutaneous tissues of human. In this study, we investigated the prevalence of D. immitis infection among 754 dogs in Seoul area from April to December 2012. The infection rate of 754 dogs was 9.8% (74/754) by the antigen test (canine SNAP 4Dx). The infection rates of D. immitis in dogs at the age of < 2, 2~4, 5~7, 8~10, and > 10 years were 3.7% (7/189), 12.9% (30/233), 15.0% (19/127), 9.8% (18/184), and 0% (0/21), respectively. The infection rates in the female and male dogs were 9.7% (33/340) and 9.9% (41/414), respectively. The regional infection rates in northern and southern Han river region of Seoul were 10.7% (44/410) and 8.7% (30/344), respectively. In order to confirm D. immitis infection, we performed PCR on serum samples of 74 dogs which tested positive for D. immitis antigen by the antigen test and we detected a specific gene ITS-2 in 59 serum samples. In conclusion, this study suggests that treatment and preventive care on the D. immitis infection should be considered in dogs of Seoul area.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.