• 제목/요약/키워드: D-phase

검색결과 6,565건 처리시간 0.03초

A Ku-Band 5-Bit Phase Shifter Using Compensation Resistors for Reducing the Insertion Loss Variation

  • Chang, Woo-Jin;Lee, Kyung-Ho
    • ETRI Journal
    • /
    • 제25권1호
    • /
    • pp.19-24
    • /
    • 2003
  • This paper describes the performance of a Ku-band 5-bit monolithic phase shifter with metal semiconductor field effect transistor (MESFET) switches and the implementation of a ceramic packaged phase shifter for phase array antennas. Using compensation resistors reduced the insertion loss variation of the phase shifter. Measurement of the 5-bit phase shifter with a monolithic microwave integrated circuit demonstrated a phase error of less than $7.5{\circ}$ root-mean-square (RMS) and an insertion loss variation of less than 0.9 dB RMS for 13 to 15 GHz. For all 32 states of the developed 5-bit phase shifter, the insertion losses were $8.2{\pm}1.4$dB, the input return losses were higher than 7.7 dB, and the output return losses were higher than 6.8 dB for 13 to 15 GHz. The chip size of the 5- bit monolithic phase shifter with a digital circuit for controlling all five bits was 2.35 mm ${\times}$1.65 mm. The packaged phase shifter demonstrated a phase error of less than $11.3{\circ}$ RMS, measured insertion losses of 12.2 ${\pm}$2.2 dB, and an insertion loss variation of 1.0 dB RMS for 13 to 15 GHz. For all 32 states, the input return losses were higher than 5.0 dB and the output return losses were higher than 6.2 dB for 13 to 15 GHz. The size of the packaged phase shifter was 7.20 mm${\times}$ 6.20 mm.

  • PDF

Effect of Carbohydrate Sources in Phase I and Phase II Pig Starter Diets

  • Kim, I.B.;Allee, G.L.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제14권10호
    • /
    • pp.1419-1424
    • /
    • 2001
  • Previous research in our laboratory has demonstrated the importance of lactose in phase I and II pig starter diets. Two experiments were conducted to evaluate the use of a carbohydrate by-product (food by-products) as a replacement for lactose. In Exp. I, 120 weaned pigs ($14{\pm}2d$ and 5.65kg) were allotted in a randomized complete block design (RCBD) to 10 replications with four pigs per pen. This experiment evaluated three carbohydrate sources (lactose, carbohydrate by-product, and 50-50 blend of the carbohydrate by-product and lactose). The carbohydrate sources were added at 26% in the phase I diets and 15% in the phase II diets. Phase I diets contained 7.5% spray dried plasma protein (SDP). The phase I diets were fed from d 0 to 14 and the phase II diets from d 15 to 28. There were no significant differences between carbohydrate sources on pig performance in phase I. However, during phase II pigs fed the diet with lactose had an improved gain/feed ratio (G/F) (p=0.06) compared to pigs fed the carbohydrate by-product. For the entire 28 d trial ADG, ADFI and G/F were similar for the 50-50 blend and those fed lactose. Total replacement of lactose with the carbohydrate byproduct resulted in a reduced G/F (p=0.09). Exp. 2 used 100 weaned pigs ($17{\pm}2d$ and 4.75kg) with five replications with five pigs per pen. This experiment evaluated four carbohydrate treatments (lactose, carbohydrate by-products, 50-50 blend, and corn). All phase I diets contained 3.5% SDP with the carbohydrate sources included at 15%, and were fed d 0 to 14. The phase II diets contained 7.5% of the carbohydrate sources and were fed d 15 to 27. A common phase III diet was fed d 28 to 42. During all phases pigs fed com tended to have a lower ADG than pigs fed the other carbohydrate sources with the 50-50 blend resulting in the highest ADG. The results of both experiments suggest that this carbohydrate by-product can replace at least 50% of the lactose in phase I and phase II pig starter diets.

Fringe Projection Profilometry를 개선한 효율적인 3D 측정 기법 (An Efficient 3D Measurement Method that Improves the Fringe Projection Profilometry)

  • 김호중;조태훈
    • 한국정보통신학회논문지
    • /
    • 제20권10호
    • /
    • pp.1973-1979
    • /
    • 2016
  • 기술이 발전하면서 카메라를 통해 3D 측정을 하는 방법은 계속 발전되어왔고 최근에는 여러 주기의 fringe pattern을 이용한 측정 방법을 쓰고 있다. 본 논문에서는 여러 주기의 fringe pattern을 이용한 3D 측정 방법에 대한 기존 방법의 문제점을 제시하고, 이에 대한 해결 방안으로 기준면의 절대위상과 물체의 위상차를 이용한 물체의 절대위상을 구하는 방법을 제안한다. 이를 이용하면 새로운 물체에 대해서 매번 여러 주기의 fringe pattern을 조사하지 않고 물체의 절대위상을 얻을 수 있다. 따라서 제안하는 방법을 이용하면, 측정단계에서 취득하는 영상의 개수가 적기 때문에 보다 빠른 속도로 3D 측정을 할 수 있다. 실험을 통하여 제안하는 방법의 유용성을 보였다.

X-Band 6-Bit Phase Shifter with Low RMS Phase and Amplitude Errors in 0.13-㎛ CMOS Technology

  • Han, Jang-Hoon;Kim, Jeong-Geun;Baek, Donghyun
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제16권4호
    • /
    • pp.511-519
    • /
    • 2016
  • This paper proposes a CMOS 6-bit phase shifter with low RMS phase and amplitude errors for an X-band phased array antenna. The phase shifter combines a switched-path topology for coarse phase states and a switch-filter topology for fine phase states. The coarse phase shifter is composed of phase shifting elements, single-pole double-throw (SPDT), and double-pole double-throw (DPDT) switches. The fine phase shifter uses a switched LC filter. The phase coverage is $354.35^{\circ}$ with an LSB of $5.625^{\circ}$. The RMS phase error is < $6^{\circ}$ and the RMS amplitude error is < 0.45 dB at 8-12 GHz. The measured insertion loss is < 15 dB, and the return losses for input and output are > 13 dB at 8-12 GHz. The input P1dB of the phase shifter achieves > 11 dBm at 8-12 GHz. The current consumption is zero with a 1.2-V supply voltage. The chip size is $1.46{\times}0.83mm^2$, including pads.

Ku-Band용 위상 고정 고조파 발진기 설계 (Design of Ku-Band Phase Locked Harmonic Oscillator)

  • 이건준;김영식
    • 한국전자파학회논문지
    • /
    • 제16권1호
    • /
    • pp.49-55
    • /
    • 2005
  • 본 논문에서는 아날로그 위상 고정 루프(PLL: Phase Locked Loop)를 이용한 무선 LAN(Wireless Local Area Network)용 위상 고정 고조파 발진기(PLHO: Phase Locked Harmonic Oscillator)를 설계 및 제작하였다. 이 고조파 발진기는 Ring 공진기, 주파수 동조를 위한 바랙터 다이오드 그리고 위상 고정 루프 회로로 구성된다. 발진기의 8.5 GHz의 기본 주파수는 위상 고정 루프를 위한 귀환 신호로 이용되고 17.0 GHz의 2차 고조파는 출력으로 이용되므로 위상 고정 시스템에서 위상 비교를 위한 주파수 분배기를 한 단계 줄일 수 있다. 위상 비교기로는 샘플링 위상 검출기(SPD: Sampling Phase Detector)를 사용하여 위상고정 루프 회로를 간단히 하였다. 위상고정 고조파 발진기의 발진 출력은 17.0 GHz에서 2.17 dBm, 기본 주파수와 3차 고조파 억압 특성은 각각 -31.5 dBc, -29.0 dBc이다. 위상잡음은 각각 -87.6 dBc/Hz at 1 kHz와 -95.4 dBc/Hz at 10 kHz이다.

호흡동조방사선치료를 위한 4D-CT simulation을 이용한 동적장기와 종양 움직임 평가 (Evaluation 4D-CT Simulation used of Motion Organ and Tumor for Respiratory Gated Radiation Therapy)

  • 김승철;김민아
    • 한국콘텐츠학회논문지
    • /
    • 제15권9호
    • /
    • pp.395-402
    • /
    • 2015
  • 복부 및 흉부의 방사선 치료 시 호흡에 의한 종양의 움직임을 평가하고, 그 데이터를 활용하여 종양과 정상조직을 구분함으로써 정상조직에 대한 손상을 최소화하고 종양 치료 효과를 극대화 하고자 하였다. 폐암과 간암 환자를 각 20명씩 대상으로 4D-CT simulation과 GE사의 Light speed-16 검사장비로 50% top phase를 기준으로 30~70 % gating phase 구간과 0~90 % full phase 구간에서 움직임을 측정하였다. 폐와 간에서 종양의 full phase가 0~90 % 와 gating phase가 30~70 % 일 경우 GTV의 움직임과 크기를 비교하였다. I(inferior)에서 가장 큰 차이가 있었으며, full phase가 0~90%일 때 종양 움직임의 정도는 상대적으로 컸으며, gating phase를 30~70 % 하였을 때 종양 움직임이 평균 7.1mm 감소된 다는 것을 확인하였다. 동일한 방법으로 4D-CT simulation에서 full phase가 0~90 %일 때 움직임 값과 gating phase가 30~70 % 일 때 움직임 값을 비교해보면 full phase가 0~90% 보다 gating phase가 30~70% 일 때 2배 이상 움직임이 감소한다는 것을 확인하였다. 따라서 4D-CT simulation에서 얻을 결과를 이용하여 환자치료에 적용한다면 정상조직에 대한 피폭을 현저히 경감시킬 수 있을 것이며, 치료 후 방사선 장해와 환자의 고통 감소 등 효과적인 치료 결과를 얻을 수 있을 것으로 사료된다.

10-GHz band 2 × 2 phased-array radio frequency receiver with 8-bit linear phase control and 15-dB gain control range using 65-nm complementary metal-oxide-semiconductor technology

  • Seon-Ho Han;Bon-Tae Koo
    • ETRI Journal
    • /
    • 제46권4호
    • /
    • pp.708-715
    • /
    • 2024
  • We propose a 10-GHz 2 × 2 phased-array radio frequency (RF) receiver with an 8-bit linear phase and 15-dB gain control range using 65-nm complementary metal-oxide-semiconductor technology. An 8 × 8 phased-array receiver module is implemented using 16 2 × 2 RF phased-array integrated circuits. The receiver chip has four single-to-differential low-noise amplifier and gain-controlled phase-shifter (GCPS) channels, four channel combiners, and a 50-Ω driver. Using a novel complementary bias technique in a phase-shifting core circuit and an equivalent resistance-controlled resistor-inductor-capacitor load, the GCPS based on vector-sum structure increases the phase resolution with weighting-factor controllability, enabling the vector-sum phase-shifting circuit to require a low current and small area due to its small 1.2-V supply. The 2 × 2 phased-array RF receiver chip has a power gain of 21 dB per channel and a 5.7-dB maximum single-channel noise-figure gain. The chip shows 8-bit phase states with a 2.39° root mean-square (RMS) phase error and a 0.4-dB RMS gain error with a 15-dB gain control range for a 2.5° RMS phase error over the 10 to10.5-GHz band.

D상 유화물을 이용한 W/O 유화물의 제조와 특성 (Preparation and Properties of W/O Emulsion by D Phase Emulsification)

  • 김형진;정노희;윤영균;박관선;남기대
    • 한국응용과학기술학회지
    • /
    • 제15권2호
    • /
    • pp.25-32
    • /
    • 1998
  • The emulsion stability of W/O emulsion prepared by D phase emulsification during storage and handling is studied by using phase diagrams. The process of D phase emulsification begins with the formation of isotropic surfactant solution, followed by formation of oil-in-surfactant (O/D) gel emulsion by dispersion of octamethylcyclotetrasiloxane(OMCS) in the surfactant solution. Polyols were essential components for this purpose. To understand the function of polyols, the solution behavior of nonionic surfactant/oil/water/polyol systems were investigated by the ternary phase diagrams of polyoxyethylene oleyl ether/OMCS/propylene glycol(PG) aqueous solutions. The addition of PG increased the solubility of oil in the isotropic surfactant phase. D phase emulsification method has been applied to a new type of cosmetics. By using this emulsification technique, O/W emulsion were formed without a need for adjust of HLB. Fine and stable W/O emulsions were prepared by D phase emulsion.

Influence of air pressure, temperature, humidity and CO$_{2}$ concentration on optical phase changes in thin films

  • Kim, Moon-Hwan;Tachikawa, Yoshihiko;Ogita, Eiji;Ueda, Toshitsugu
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
    • /
    • pp.799-804
    • /
    • 1989
  • A new method for measuring optical phase changes of reflection beam from optical mirror is proposed. The optical phase change is liable to change with varying atmosphere conditions. This optical phase changes are measured against air pressure, temperature, humidity and CO$\_$2/ concentration variations. It is clarified that the optical phase changes are most effected by humidity change.

  • PDF

Phase Error Reduction for Multi-frequency Fringe Projection Profilometry Using Adaptive Compensation

  • Cho, Choon Sik;Han, Junghee
    • Current Optics and Photonics
    • /
    • 제2권4호
    • /
    • pp.332-339
    • /
    • 2018
  • A new multi-frequency fringe projection method is proposed to reduce the nonlinear phase error in 3-D shape measurements using an adaptive compensation method. The phase error of the traditional fringe projection technique originates from various sources such as lens distortion, the nonlinear imaging system and a nonsinusoidal fringe pattern that can be very difficult to model. Inherent possibility of phase error appearing hinders one from accurate 3-D reconstruction. In this work, an adaptive compensation algorithm is introduced to reduce adaptively the phase error resulting from the fringe projection profilometry. Three different frequencies are used for generating the gratings of projector and conveyed to the four-step phase-shifting procedure to measure the objects of very discontinuous surfaces. The 3-D shape results show that this proposed technique succeeds in reconstructing the 3-D shape of any type of objects.