• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.181-188
• /
• 2015

The non-contact permanent magnet gear has advantages of high efficiency and improved reliability. It has other advantages of no mechanical friction loss, very little noise and vibration, and no need for lubricant. With these advantages, the non-contact permanent magnet gear that solves the physical contact problem of the mechanical gear has drawn attention. Due to this unique non-contact characteristic, the non-contact permanent magnet gear which is capable of non-contact torque transmission has replaced mechanical gear. The mechanical gears which is in many fields of the modern industry, is used mostly for power transmitting mechanical devices. However, it also has the problem of a low torque density, which requires improvement. In this paper, a novel pole piece shape is proposed in order to improve the problem of low torque density of the non-contact permanent magnet gear. The experiment data required for predicting the relationships among them are obtained using finiteelement Operating method based on two-dimensional (2-D) numerical analysis. Therefore, this paper derived an optimal model for thenon-contact permanent magnet gear with the novel pole piece using the Box-Behnken design, and the validity of the optimal design of the proposed pole piece shape through variance analysis and regression analysis demonstrated. In this paper, we performed the thransfer torque analysis in order to improve the torque density and power density, we have performed on optimal design of proposed pole piece shape using box-behnken.

• Journal of Convergence for Information Technology
• /
• v.12 no.3
• /
• pp.132-140
• /
• 2022

This study was conducted to identify the optimal lotion manufacturing conditions with decursin and decursinol angelate of Angelica gigas Nakai extraction. Lotion was confirmed that it had viscosity (5,208±112 cPs), assay (99.71±1.01%), and pH (5.62) for 3 months. The optimization of manufacturing conditions of mixing 4 for lotion formulation were made by 22+3 full factorial design. Mixing temperature (40-80℃) and mixing time (10-30 min) were used as independent variables with three responses(assay, pH, and weight variation) as critical quality attributes (CQAs). The model for assay and weight variation identified a proper fit having a determination coefficient of the regression equation (about 0.9) and a p-value less than 0.05. Estimated conditions for the optimal manufacturing process of lotion were 61.93℃ in mixing temperature and 15.85 min in mixing time. Predicted values at the mixing temperature (60℃) and mixing time (20 min) were 100.69% of assay, 5.57 of pH, and 98.07% of weight variation. In the verification of the actual measurement the obtained values showed 100.29±0.98% of assay, 5.57±0.02 of pH, and 98.27±0.89% of weight variation, respectively, in good agreement with predicted values.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.247-247
• /
• 2019

수력발전 사업에 있어 Desander 구조물은 주로 고산지대 수력발전댐의 Run-of-river 형식의 발전방식에서 유사로 인한 터빈의 손상을 방지하기 위한 목적으로 설치된다. Desander의 적정 규모는 터빈의 손상을 일으킬 수 있는 유사 입경에 대해 안정적으로 침전을 시킬 수 있는 폭/길이/깊이로 평가할 수 있으며 상대적으로 Desander의 규모가 크게 설계된 경우 초기 공사비 증가하고 반대로 규모가 작게 설계된 경우 터빈의 교체 주기 단축으로 인한 유지관리비가 증가된다. 현재까지 일반적인 Desander 구조물의 설계 방식은 제거 입경의 침전 속도, 유입유량 및 깊이를 변수로 사용하여 경험식(L. Sudry method, Guicciardis method 및 Rouse method)을 통해 규모를 결정해 왔다. 하지만, 3-D 전산유체해석을 통해 유속 흐름 분석으로 직 간접적 Desander 규모의 적정성을 평가할 수 있는 현 시점에서 경험식으로부터 도출된 결과의 신뢰성과 객관성을 검증할 필요가 있다고 판단된다. 본 연구에서는 노르웨이 NSTU에서 개발한 유사의 이송 및 확산해석 기능이 내장된 범용 소프트웨어인 SSIIM을 이용하였다. SSIIM(Simulation of Sediment movements In water Intakes with Multiblock)은 개수로 흐름 상태에서 유사 이동 및 하상 변동을 분석할 수 있도록 개발된 3-D 해석 프로그램이다. SSIIM은 수치해석 방법으로 유한체적법(Finite Volume Method)를 채택하였으며 Navier-Stokes equations을 통해 유체의 흐름을 해석한다. 입력 자료는 유입 유량($m^3/sec$), 유입 유사량(kg/sec), 유출부 수위 및 해당 Desander Structure grid 자료가 사용되며 해석 결과로 Desander 내 grid 별 유속, 수위, 유사 농도 변화 등을 제공한다. 본 연구에서는 SSIIM을 이용하여 제거 목표 유사 입경의 차집 효율(Trap efficiency)로 Desander의 적정 규모를 평가 할 수 있는 설계법을 제안하며 설계 단계에서 결정되는 최소 제거유사 입자와 차집 효율에 의한 Desander의 적정 규모 평가 분석을 파키스탄 A 프로젝트를 대상으로 수행하였다. 연구 성과로 (1)SSIIM을 통해 해석된 차집 효율을 기초로 Desander의 적정 규모를 계획할 경우 경험적 방식에 비해 설계의 객관성과 신뢰성을 제고할 수 있으며 (2)3-D 수치해석을 통해 grid 별 유사농도를 확인 할 수 있어 Desander 형상과 규모에 대한 평가가 가능하다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.7
• /
• pp.645-653
• /
• 2017

In bone tissue engineering, polycaprolactone (PCL) is one of the most widely used biomaterials in the manufacturing of scaffolds as a synthetic polymer having biodegradability and biocompatibility. The strut width in the fabrication of scaffolds is an important part of tissue regeneration in in-vitro and in-vivo experiments, because it affects not only the pore size but also the porosity. In this study, we used polymer deposition system (PDS) and design of experiments (DOE) to explore the optimal process conditions to achieve a systematic and efficient scaffold manufacturing process, using temperature, pressure, scan velocity, and nozzle tip height as the parameters for the experiments. The aim of this research was to fabricate a 3D PCL scaffold having a uniform strut width of $150{\mu}m$ using DOE; it was proved that the strut width was constant in all the experimental groups by fabricating the PCL scaffolds according to various pore patterns as well as one pore pattern.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.7
• /
• pp.149-155
• /
• 2013

Commonly, one seeks a particular pattern suitable for stock cutting and the number of such patterns through linear programming. However, since the number of the patterns increases exponentially, it is nearly impossible to predetermine all the existing patterns beforehand. This paper thus proposes an algorithm whereby one could accurately predetermine the number of existing patterns by applying Suliman's feasible pattern method. Additionally, this paper suggests a methodology by which one may obtain exact polynomial-time solutions for feasible patterns without applying linear programming or approximate algorithm. The suggested methodology categorizes the feasible patterns by whether the frequency of first occurrence of all the demands is distributed in 0 loss or in various losses. When applied to 2 data sets, the proposes algorithm is found to be successful in obtaining the optimal solutions.

• Culinary science and hospitality research
• /
• v.23 no.7
• /
• pp.20-30
• /
• 2017

This study was conducted for the optimization of ingredients in salad dressing using Hwangdo peach (Prunus persica L. Batsch). The experiment was designed according to the D-optimal design of mixture design, which included 14 experimental points with 4 replicates for three independent variables (olive oil 40~65%, peach puree 27~50%, vinegar 8~20%). The linear regression models for pH, viscosity and color value and the quadratic regression models for emulsion stability, all sensory evaluation of the products were proven to be valid by the F-test for the overall significance of the regression model at a 5% level. Viscosity and pH of the products increased as olive oil content. Color value, viscosity and pH of the products increased as peach puree content. pH, viscosity, redness, and yellowness of the products decreased as vinegar content. Sensory evaluation result of the products showed that general preference for the products were increasingly affected by the increases in contents then decreased as they exceeded the optimum levels. In consequence, according to result from the first stage of the experiment, the optimum ingredients ratios of the raw materials were set in olive oil 52.43%, peach puree 35.07%, and vinegar 13.91% for ingredients of apricot dressing. These results provided the possibility that peach can be applied to the preparation of a dressing, and thereby present baseline data for the development of new dressings. This is also presumed to meet demands of customers who are always in pursuit of new products.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3035-3043
• /
• 2015

This study evaluates the thermal structural safety of the three-way catalyst(TWC) substrate for domestic passenger cars. Thermal-fluid boundary conditions on the TWC substrate were determined by D-optimal DOE. The thermal stresses on the TWC substrate were calculated by the temperature distribution obtained from the CFD results. The safety factors of the TWC substrate were determined by statistical strength and stress distributions and estimated to be 0.275. The thermal stresses for TWC substrate exceeded the strength of the material. Therefore, it is necessary to redesign the TWC substrate because it has much shorter service life than design life.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.6
• /
• pp.648-653
• /
• 2012

Cavity pressure, an important factor in injection molding process, should be minimized to enhance injection molding quality. In this study, we decided the locations of valve gates to minimize the maximum cavity pressure. To solve this problem, we integrated MAPS-3D (Mold Analysis and Plastic Solution-3Dimension), a commercial injection molding analysis CAE tool, using the file parsing method of PIAnO (Process Integration, Automation and Optimization) as a commercial process integration and design optimization tool. In order to reduce the computational time for obtaining the optimal design solution, we performed an approximate optimization using a meta-model that replaced expensive computer simulations. To generate the meta-model, computer simulations were performed at the design points selected using the optimal Latin hypercube design as an experimental design. Then, we used micro genetic algorithm equipped in PIAnO to obtain the optimal design solution. Using the proposed design approach, the maximum cavity pressure was reduced by 17.3% compared to the initial one, which clearly showed the validity of the proposed design approach.

• Food Engineering Progress
• /
• v.21 no.1
• /
• pp.79-87
• /
• 2017

This study was carried out to extract ginsenosides in by-products from honeyed red ginseng. Response surface methodology (RSM) was used to optimize the extraction conditions. Based on D-optimal design, independent variables were ethanol (extraction solvent) concentration (30-90%, v/v), extraction temperature ($25-70^{\circ}C$), and extraction time (5-11 h). Extraction yield (Y1) and total ginsenosides (Y2) in the extract were analyzed as dependent variables. Results found that extraction yield increased with increasing extraction temperature and time, whereas it was decreased with increasing ethanol concentration. Similar trends were found for the content of ginsenosides in the extracts, except for ethanol concentration, which was increased with increasing ethanol concentration. Regression equations derived from RSM were suggested to coincide well with the results from the experiments. The optimal extraction conditions for extraction yield and total ginsenosides were an extraction temperature of $56.94^{\circ}C$, ethanol concentration of 57.90%, and extraction time of 11 h. Under these conditions, extraction yield and total ginsenoside contents were predicted to be 84.52% and 9.54 mg/g, respectively.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.5
• /
• pp.65-71
• /
• 2006

This paper presents the robust design of gripper part for a high-speed LCD(Liquid Crystal Display) transfer system. In this paper, the $1^{st}$ DOE(Design of Experiment) is conducted to find out main-effect factors for the design of gripper part. Thirty-six analysis are performed using $ANSYS^{(R)}$ and their results are statistically analyzed using $MINITAB^{(R)}$, which shows that the factors, i.e., First-width, Second-width, Rec-width, and thickness of gripper part, are more important than other factors. The main effect plots shows that the maximum deflection and mass of gripper part are minimized by increasing First-width, Second-width, Rec-width and thickness. The $2^{nd}$ DOE is conducted to obtain RSM(Response Surface Method) equation. The CCD(Central Composite Design) technique with four factors is used. Optimum design is conducted using the RSM equation. Genetic algorithm is used for optimal design. Six sigma robust design is conducted to find out a guideline for control range of design parameter. To obtain six sigma level quality, the standard deviations of design parameters are shown to be controlled within 5% of average design value.