• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.6
• /
• pp.745-752
• /
• 2018

ICs(Integrated circuits) for nuclear power plant exposed to radiation environment occur malfunctions and data errors by the TID(Total ionizing dose) effects among radiation-damage phenomenons. In order to protect ICs from the TID effects, this paper proposes a radiation-hardening of the logic circuit(D-latch) which used for the data synchronization and the clock division in the ICs design. The radiation-hardening technology in the logic device(NAND) that constitutes the proposed RH(Radiation-hardened) D-latch is structurally more advantageous than the conventional technologies in that it keeps the device characteristics of the commercial process. Because of this, the unit cell based design of the RH logic device is possible, which makes it easier to design RH ICs, including digital logic circuits, and reduce the time and cost required in RH circuit design. In this paper, we design and modeling the structure of RH D-latch based on commercial $0.35{\mu}m$ CMOS process using Silvaco's TCAD 3D tool. As a result of verifying the radiation characteristics by applying the radiation-damage M&S (Modeling&Simulation) technique, we have confirmed the radiation-damage of the standard D-latch and the RH performance of the proposed D-latch by the TID effects.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.2
• /
• pp.227-236
• /
• 2017

Quantum-dot cellular automata(QCA) consists of nano-scale cells and demands very low power consumption so that it is one of the alternative technologies that can overcome the limits of scaling CMOS technologies. Various circuits on QCA have been researched until these days, a latch required for counter and state control has been proposed as a component of sequential logic circuits. A latch uses a feedback loop to maintain previous state. In QCA, a latch uses a square structure using 4 clocks for feedback loop. Previous latches have been proposed using many cells and clocks in coplanar. In this paper, in order to eliminate these defects, we propose a SR and D latch using multilayer structure on QCA. Proposed three dimensional loop structure is based on multilayer and consists of 3 layers. Each layer has 2 clock differences between layers in order to reduce interference. The proposed latches are analyzed and compared to previous designs.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.9
• /
• pp.54-61
• /
• 1998

A new Triple well structure is proposed for improved latch-up immunity at deep submicron CMOS device. Optimum latch-up immunity process condition is established and analyzed with varying ion implantation energy and amount of dose and also compared conventional twin well structure. Doping profile and structure are investigated using ATHENA which is process simulator, and then latch-up current is calculated using ATLAS which is device simulator. Two types of different process are affected by latch-up characteristics and shape of doping profiles. Finally, we obtained the best latch-up immunity with 2.5[mA/${\mu}{m}$] trigger current using 2.5 MeV implantation energy and 1$\times$10$^{14}$ [cm$^{-2}$ ] dose at p-well

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11C
• /
• pp.963-969
• /
• 2008

This paper presents 6bit 100MHz Interpolation Flash Analog-to-Digital Converter, which can be applied to the Receiver of Wireless Tele-communication System. The 6bit 100MHz Flash Analog-to-Digital Converter simplifies and integrates S-R latch which multiplies as the resolution increases. Whereas the conventional NAND based S-R latch needed eight MOS transistors, this Converter was designed with only six, which makes the Dynamic Power Dissipation of the A/D Converter reduced up to 12.5%. The designed A/D Converter went through $0.18{\mu}m$ CMOS n-well 1-poly 6-metal process to be a final product, and the final product has shown 282mW of power dissipation with 1.8V of Supply Voltage, 100MHz of conversion rate. And 35.027dBc, 31.253dB SFDR and 4.8bits, 4.2bits ENOB with 12.5MHz, 50MHz of each input frequency.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.515-520
• /
• 2020

CMOS used in digital circuit design technology has reached the limit of integration due to quantum tunneling. Quantum-dot cellular automata (QCA), which can replace this, has many advantages such as low power consumption and fast switching speed, so many digital circuits of CMOS have been proposed based on QCA. Among them, the multiplexer is a basic circuit used in various circuits such as D-flip-flops and resistors, and has been studied a lot. However, the existing multiplexer has a disadvantage that space efficiency is not good. Therefore, in this paper, we propose a new multilayered multiplexer using cell interaction and D-latch using it. The multiplexer and D-latch proposed in this paper have improved area, cell count, and delay time, and have excellent connectivity and scalability when designing large circuits. All proposed structures are simulated using QCADesigner to verify operation.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.632-634
• /
• 2004

First for high-qualify images and reducing process-error and driving speed, the designed 8-bit data driving circuit consists of a constant transconductance bias circuit, D-F/Fs by shift registers using static transmission gates, 1st latch and 2nd latch by tristate inverters, level shifters, current steering segmented D/A converters by 4MSB thermometer decoder and 4LSB weighted type. Second, we designed gray amp for power saving. These data driving circuits are designed with $0.35-{\mu}m$ CMOS technologies at 3.3 V and 18 V power supplies and simulated with HSPICE.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.385-388
• /
• 2003

In this paper, a D-Latch is replaced by a memory cell on the proposed PFD to improve response tine by reducing reset me. The PFD has been simulated using HSPICE with a Hynix 0.35um CMOS process to prove the performance improvement.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.10
• /
• pp.75-79
• /
• 2013

The automatic quiescent power cut-off receptacles(QPCR from now on) have achieved a noticeable energy saving so far. The government is preparing a new code for wider promotion of the QPCRs. This paper presents a new QPCR that adopts the latch relay instead of the conventional coil-operated relay. Measurement results of the prototype have shown up to 0.22W improvement of quiescent power compared with existing products.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1283-1286
• /
• 2006

A holding latch with level shifting function is proposed for power and cost effectiveness with low temperature polycrystalline silicon technology on the glass backplane. Layout area and power consumption of the proposed circuit are reduced by 10% and 52% compared with those of the typical structure which combines a static D-latch and a cross coupled level shifter for 2.2" qVGA panel, respectively.

• Journal of IKEEE
• /
• v.25 no.2
• /
• pp.376-380
• /
• 2021

In this paper, we propose a novel ESD protection device with Latch-up immunity properties due to high holding voltages by improving the structure of a typical SCR. To verify the characteristics of the proposed ESD circuit, simulations were conducted using Synopsys TCAD and presented compared to existing ESD protection circuits. Furthermore, the variation of electrical properties was verified using the design variable D1. Simulation results confirm that the proposed ESD protective circuit has higher holding voltage properties and bidirectional discharge properties compared to conventional ESD protective circuits. We validate the electrical properties with post-design TLP measurements using Samsung's 0.13um BCD process. And we verify that the proposed ESD protection circuit in this paper is well suited for high voltage applications in that it has a latch-up immunity due to improved holding voltage through optimization of design variables.