• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.490-495
• /
• 1996

Low molecular weight linear chlorine terminated siloxanes (yields;71.2~86.5%) were prepared by reactions of cyclotri-, cyclotetra- and cyclopentasiloxane with dimethyldichlorosilane in the presence of pyridine N-oxide catalyst. The amine terminated siloxane oligomers were obtained in good yields(76.2~85.3%) by the reaction of linear chlorine terminated siloxanes with dimethylamine at $0^{\circ}C$. In this investigation, we have studied on the syntheses and properties of copolymers (yields;58.0~71.0%) obtained from the reaction of amine terminated siloxane oligomers with 1,4-bis(dimethylhydroxysilyl)benzene. The structures and properties of the copolymers were examined by FT-IR, $^1H$-NMR, TGA and DSC. Initial degradation temperatures($T_D{^i}$) of the polymer I and IV were confirmed as 476 and $485^{\circ}C$, respectively. The thermal stabilities of the polymers were found to be increased with increasing n of $(R_2SiO)_n$. The glass transition temperatures(Tg) of the polymers were increased with decreasing n of $(R_2SiO)_n$, and the lowest Tg revealed $-76^{\circ}C$ when n=5.

• The Korean Journal of Physiology and Pharmacology
• /
• v.2 no.4
• /
• pp.435-441
• /
• 1998

We examined effects of interleukin $1{\alpha}$ ($IL1{\alpha}$) and phorbol 12, 13 dibutyrate (PDB), an activator of protein kinase C, on mRNA for Prostaglandin H synthase (PGHS) and prostanoid production in cultured ovine meningeal fibroblasts. Immuno- and morphologically-identified fibroblasts were derived from cerebral cortex and white matter from fetal lambs (approximately 120 days gestation) and grown to confluence on glass coverslips in 12 well plates. Levels of prostaglandin $F_{2{\alpha}}$ and the stable hydrolysis product of prostacyclin (i.e., $6-keto-PGF_{1{\alpha}}$) were determined using enzyme immunoassay. Relative amounts of mRNA were determined by in situ hybridization using ovine cDNA for PGHS1. $IL1{\alpha}$ (10 ng/ml) increased mRNA levels over baseline by $62{\pm}19%$ (p＜0.05) at 60 min., $37{\pm}12%$ (NS) at 120 min., and $36{\pm}18%$ (NS) at 240 min (n=12). Levels of $6-keto-PGF_{1{\alpha}}$ were $148{\pm}18%$ pg/ml during baseline, $246{\pm}41%$ pg/ml at 60 min., $248{\pm}40%$ pg/ml at 120 min., and $259{\pm}62%$ pg/ml at 240 min (all p＜0.05) (n=12). $PGF_{2{\alpha}}$ was increased although it wasn't statistically significant. However, $IL1{\alpha}$ decreased $PGE_2$ level significantly (all p＜0.05). PDB $(10^{-6}M)$ increased mRNA levels over baseline by $25{\pm}6%$ after 30 min., $40{\pm}6%$ after 60 min., and $20{\pm}8%$ after 90 min. (n=9) (all p＜0.05). Levels of $6-keto-PGF_{1{\alpha}}$ were $200{\pm}43%$ pg/ml during baseline, $202{\pm}43%$ pg/ml after 30 min. (NS), $268{\pm}58%$ pg/ml after 60 min. (p＜0.05), and $296{\pm}60%$ pg/ml after 90 min. (p＜0.05) (n=9). Levels of $PGF_{2{\alpha}}$ were $178{\pm}26%$ pg/ml during baseline, $300{\pm}30%$ pg/ml after 30 min., $299{\pm}35%$ pg/ml after 60 min., and $355{\pm}32%$ pg/ml after 90 min (all p＜0.05) (n=6). Actinomycin-D (1 mg/ml) prevented increases in mRNA, $6-keto-PGF_{1{\alpha}}$, and $PGF_{2{\alpha}}$ at 60 min. for both $IL1{\alpha}$ and PDB. We conclude that cerebral fibroblasts are avid producers of prostanoids, and that enhanced production of PGHS is responsible for augmented $PGF_{2{\alpha}}$ and prostacyclin production in the presence of an activator of protein kinase C and for decreased $PGE_2$ and increased prostacyclin production in the presence of $IL1{\alpha}$.

• Publications of The Korean Astronomical Society
• /
• v.24 no.1
• /
• pp.53-64
• /
• 2009

MIRIS is the main payload of the STSAT-3 (Science and Technology Satellite 3) and the first infrared space telescope for astronomical observation in Korea. MIRIS space observation camera (SOC) covers the observation wavelength from $0.9{\mu}m$ to $2.0{\mu}m$ with a wide field of view $3.67^{\circ}\times3.67^{\circ}$. The PICNIC HgCdTe detector in a cold box is cooled down below 100K by a micro Stirling cooler of which cooling capacity is 220mW at 77K. MIRIS SOC adopts passive cooling technique to chill the telescope below 200 K by pointing to the deep space (3K). The cooling mechanism employs a radiator, a Winston cone baffle, a thermal shield, MLI (Multi Layer Insulation) of 30 layers, and GFRP (Glass Fiber Reinforced Plastic) pipe support in the system. Optomechanical analysis was made in order to estimate and compensate possible stresses from the thermal contraction of mounting parts at cryogenic temperatures. Finite Element Analysis (FEA) of mechanical structure was also conducted to ensure safety and stability in launching environments and in orbit. MIRIS SOC will mainly perform Galactic plane survey with narrow band filters (Pa $\alpha$ and Pa $\alpha$ continuum) and CIB (Cosmic Infrared Background) observation with wide band filters (I and H) driven by a cryogenic stepping motor.

• Korean Journal of Optics and Photonics
• /
• v.28 no.1
• /
• pp.9-15
• /
• 2017

We precisely measured and analyzed the dynamics of peptide-antibody interactions, using an ellipsometric biosensor based on a silicon substrate. To reduce the signal error due to the imperfect flatness of the substrate for extremely low concentrations of peptide, we fabricated the biosensor with a silicon substrate coated with Dextran SAM, instead of a glass prism coated with a thin metallic thin film. At an injection speed of $100{\mu}l/min$ of buffer liquid, we detected the dynamics of antibody-Dextran SAM or peptide-antibody fixed on biosensor, respectively. We detected the dynamics of antibody-Dextran SAM interactions down to a low concentration of 5 ng per liter, and we precisely measured the dynamics of association and dissociation of peptide and antibody down to 100 nM of peptide. We obtained the rate constants for association and dissociation from fitting the data by using deduced dynamical equation. As a result, we obtained an equilibrium constant for dissociation of 97 nM of peptide-antibody complex, which belongs to Class I.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.2
• /
• pp.43-47
• /
• 2000

The purpose of this study is evaluate for effect quality eye care to the aged population of rural community. This study investigated one of important factors in dispensing distance pupillary distance. measured reading pupillary distance, calculated reading pupillary distance into age group and sex. I measured pupillary distance and near inter pupillary distance with corneal reflection pupillometer(shin Nippon PD-82) The objects are male and female living rural community at least 60 years old. The mean pupillary distance for distance of male and female were 63.52 mm, 61.24 mm, respectively. The mean measured reading pupillary distance of male and female were 60.12 mm, 58.08 mm, respectively. Gradient and difference between male and female were same with mean pupillary distance for distance. The result of comparison the mean difference of the mean measured reading pupillary distance and the calculated reading pupillary distance into the age group and sex. This result of changes of addition, as the age is older, the mean addition is greater than youth. I'd like to compare changes of these factors influenced by environmental factors, however I couldn't see about these. So I couldn't considered their relationship and some possible problems of wearing commercial reading glass.

• Advanced Composite Materials
• /
• v.17 no.1
• /
• pp.25-40
• /
• 2008

The research and development in soundproof materials for preventing noise have attracted great attention due to their social impact. Noise insulation materials are especially important in the field of soundproofing. Since the insulation ability of most materials follows a mass rule, the heavy weight materials like concrete, lead and steel board are mainly used in the current noise insulation materials. To overcome some weak points in these materials, fiber reinforced composite materials with lightweight and other high performance characteristics are now being used. In this paper, innovative insulation sheet materials with carbon and/or glass fabrics and nano-silica hybrid PU resin are developed. The parameters related to sound performance, such as materials and fabric texture in base fabric, hybrid method of resin, size of silica particle and so on, are investigated. At the same time, the wave analysis code (PZFlex) is used to simulate some of experimental results. As a result, it is found that both bundle density and fabric texture in the base fabrics play an important role on the soundproof performance. Compared with the effect of base fabrics, the transmission loss in sheet materials increased more than 10 dB even though the thickness of the sample was only about 0.7 mm. The results show different values of transmission loss factor when the diameters of silica particles in coating materials changed. It is understood that the effect of the soundproof performance is different due to the change of hybrid method and the size of silica particles. Fillers occupying appropriate positions and with optimum size may achieve a better effect in soundproof performance. The effect of the particle content on the soundproof performance is confirmed, but there is a limit for the addition of the fillers. The optimization of silica content for the improvement of the sound insulation effect is important. It is observed that nano-particles will have better effect on the high soundproof performance. The sound insulation effect has been understood through a comparison between the experimental and analytical results. It is confirmed that the time-domain finite wave analysis (PZFlex) is effective for the prediction and design of soundproof performance materials. Both experimental and analytical results indicate that the developed materials have advantages in lightweight, flexibility, other mechanical properties and excellent soundproof performance.

• Elastomers and Composites
• /
• v.36 no.2
• /
• pp.111-120
• /
• 2001

Mechanical properties and their adhesion behavior with zinc- and brass-plated steel cords of natural rubber/acrylonitrile-butadiene blend compounds were investigated as a function of blend ratio. The Mooney viscosity and stress relaxation time were found to be lowered with increasing NBR content. Tensile modulus generally increased with increasing NBR content. Tensile stress at break stayed constant up to about 40 phr and showed minimum at $50{\sim}60 phr$, and thereafter increased with increasing NBR content. Strain at break decreased linearly below 50 phr, and above the level it showed nearly constant value. Based on the abrupt drops in elastic modulus and tan ${\delta}$ peak, the glass transition temperature of NR and NBR were found to be -55 and $-10^{\circ}C$, respectively. In the case of NR/NBR blend compounds, two distinct transition points were observed and each transition position was not affected by NBR level indicating an incompatible nature of NR/NBR blend system. The pullout force and rubber coverage decreased to the level of about 40% to that of pure m compound, when the 50 phr of NR was replaced by NBR. However, the pure NBR compound showed the comparable adhesion performance with NR(${\sim}90%$). The sulfur concentration was found to become lower with the increased NBR content at the adhesion interface based on the Auger spectrometer results, representing a lack of adhesion layer formation, and this was explained for a possible cause of low adhesion performance with adding NBR.

• Journal of Periodontal and Implant Science
• /
• v.37 no.4
• /
• pp.719-732
• /
• 2007

Purpose: Various bone graft materials are being used for periodontal tissue regeneration. Th materials are being developed continuously for ideal clinical effects. Therefore, it is necessary to identify the clinical characteristics of each bone graft material through comparing the various bone graft materials statistically and in doing so, proposing a more efficient bone graft material. In this study, the following results were attained through comparing the clinical effects among the bone graft materials, using the statistical method based on the clinical studies published at the department of periodontology of Yonsei hospital. Materials and Method: 6 selected studies of department of Periodontology at Yonsei University Hospital were based on clinical study of bone grafting in intrabony defects. It was compared the clinical parameters among the 6 clinical studies, using the statistical META analysis. Result: When comparing the probing depth reduction, there was a relatively great amount of decease when using the xenograft, Anorganic Bovine Derived Hydroxapatite Bone Matrix/Cell Binding Peptide(ABM/P-15: PepGen $P-15^{(R)}$) and the autogenous bone and absorbable membrane, d, 1-alctide/glycolide copolymer(GC: $Biomesh^{(R)}$). The allogfrafts showed a relatively low decrease in the probing depth and clinical attachment change. It also showed a slight decrease in the bone probing depth. The allografts showed various results according to different bone graft materials. When comparing the ABM/P-15 and bovine bone $powder(BBP^{(R)})$, ABM/P-15 showed a relatively high clinical attachment level and the bovine bone powder showed a relatively high clinical attachment level. The probing depth change and gingival recession change showed a lower value than the mean value between the two bone graft materials. The synthetic bone showed a relatively high decrease in clinical attachment level and periodontal probing depth change. There was a relatively larger amount of gingival recession when using Bioactive Glass(BG) but a relatively low bone regeneration effect was seen. Conclusion: Good restorative results of the periodontal tissue can be attained by applying the various bone graft materials being used today after identifying the accurate clinical effects.

• Polymer(Korea)
• /
• v.33 no.4
• /
• pp.319-325
• /
• 2009

The solution polymerization was conducted to synthesize pressure sensitive adhesive for polarizer film using acrylic monomers. 2-Ethylhexylacrylate, butylacrylate, acrylic acid were used as acrylic monomers. The ratio was 2-ethylliexylacrylate:butylacrylate:acrylic acid=25:50:3.6 by reflecting $-40^{\circ}C$ of glass transition temperature in the pressure sensitive adhesive. When 1 wt% of coupling agent was added to the polymerized pressure sensitive adhesive, the light transmissivity was significantly increased. This result is due to the enhancement of adhesive power against liquid crystal cell by Si-O bond of coupling agents. Cross-linking agent was added by 0.5, 1.0, and 1.5 wt% with respect to the synthesized polymer. Initial tackiness decreased, while cohesion increased with increasing crosslinking agent. In the analysis of contact angle, the increase of crosslinking agents yielded the enhancement of surface energy, resulting in the decrease of contact angle. From the measurement of heat resistance, the acrylic pressure sensitive adhesive showed excellent heat resistance regardless of change in temperature and contents in crosslinking agent. In the observation of a cutting plane, the increased crosslinking agent represented a smoother and cleaner section. Comprehensively, the optimum additive amount of crosslinking agent was determined to be 1.0 wt% to monomer.

• Journal of Adhesion and Interface
• /
• v.17 no.2
• /
• pp.49-55
• /
• 2016

In this study, we designed an environment friendly, water-based adhesive using the acrylic emulsion method as a replacement for solvent-based adhesives, which are most commonly used in layered laminates for flexible food packaging. We designed adhesives with different combinations of anionic, non-ionic, and phosphoric ester surfactants, and with different concentrations of chain transfer agent (CTA). We also examined the effect of the degree of cross-linking by synthesizing and comparing 8 test group adhesives with different types of functional monomers. Additionally, we synthesized 2 other test group pressure-sensitive adhesives (PSA) using styrene/alpha-methyl styrene/acrylic acid (SAA) semipolymer dispersing agents (with molecular weights of 13,000 g/mol and 8,600 g/mol, respectively) to replace the conventional surfactants. We evaluated whether the 10 test group pressure-sensitive adhesives met the basic physical property criteria required for flexible food packaging by carrying out a physical analysis of their glass transition temperature (Tg), particle size, adhesion, and molecular weight. In our test, 2 test group adhesives manufactured with the combination of anionic and non-ionic surfactants, CTA concentration of 0.2%, and functional monomers of hydroxyethyl acrylate (HEA) and glycidyl methacrylate (GMA) demonstrated molecular weight and flexibility suitable for flexible packaging, with low adhesiveness and small particle size.