• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2003년도 하계학술대회 논문집
• /
• pp.268-271
• /
• 2003

There are several methods for the design of 2D filter. Notable among them is McClellan transform method. This transform allows us to obtain a high order 2D FIR filter through mapping the 1D frequency points of a 1D prototype FIR filter onto 2D frequency contours. We design 2D filter using this transform. Then we notice for mapping deviation of the 2D filter. In this paper, Quadratic programming (QP) method allows us to obtain coefficients of McClellan transform. Then we compare deviation of QP method with least-squares(LS) method. Elliptic filter is used for comparison. The optimal cutoff frequencies of a 1D filter are obtained directly from the QP method. Also several problem of LS method are solved.

• 한국전자파학회논문지
• /
• 제27권1호
• /
• pp.1-7
• /
• 2016

본 논문에서는 기계식 스위치를 이용한 1.5 GHz 대역 고출력 Cavity 기반 튜너블 필터를 설계하고 제작하였다. 불요파를 제거하기 위해 저역통과필터를 삽입하고, 출력을 추출하기 위해 Coupler를 내장하였으며, 고출력에 적합한 기계식 스위치를 사용하여 튜너블 필터의 시스템을 구성하였다. 저역통과필터는 4~12.75 GHz까지 40 dB 이상의 감쇄 특성을 얻었고, Coupler는 40 dB의 Coupling Value와 55 dB 이상의 Coupling Isolation을 얻었다. 제작된 기계식 스위치를 사용한 튜너블 필터 시스템은 1,495.9~1,510.9 MHz Bypass Mode에서 0.88 dB, 1,495.9~1,500.9 MHz Fil Mode에서 3.29 dB의 삽입손실 특성 및 중심주파수 1,498.4 MHz에서 132 W의 출력전력과 10 ms 이하의 스위칭 절환속도를 얻었다.

• 마이크로전자및패키징학회지
• /
• 제9권1호
• /
• pp.1-7
• /
• 2002

본 연구에서는 이동통신 시스템의 키부품으로 필수적인 멀티미디어용 고주파 Active Filter 및 초소형 설계기술(SMD타입)을 개발하였으며, 멀티미디어 고주파 능동필터의 카오프 주파수는 2.5 mHz, 이득은100 kHz에서 0.5d B, 통과대역 리플은 100 kHz에서 2 MHz까지 최고1.2dB, GDT는 100 kHz에서 2.0 MHz까지 최고 60 nsec이며, 감쇄는 3.7 MHz에서 최소 40dB임.

• 한국음향학회지
• /
• 제38권1호
• /
• pp.39-46
• /
• 2019

본 논문에서는 합성곱 신경망(Convolutional Neural Network, CNN) 구조를 이용하여 잡음 환경에서 음향신호를 분류할 때, 인식률을 높이는 결합 특징을 제안한다. 반면, Wiener filter를 이용한 강인한 log Mel-filter bank와 PNCCs(Power Normalized Cepstral Coefficients)는 CNN 구조의 입력으로 사용되는 2차원 특징을 형성하기 위해 추출됐다. 자연환경에서 43종의 조류 울음소리를 포함한 ebird 데이터베이스는 분류 실험을 위해 사용됐다. 잡음 환경에서 결합 특징의 성능을 평가하기 위해 ebird 데이터베이스를 3종류의 잡음을 이용하여 4개의 다른 SNR (Signal to Noise Ratio)(20 dB, 10 dB, 5 dB, 0 dB)로 합성했다. 결합 특징은 Wiener filter를 적용한 log-Mel filter bank, 적용하지 않은 log-Mel filter bank, 그리고 PNCC와 성능을 비교했다. 결합 특징은 잡음이 없는 환경에서 1.34 % 인식률 향상으로 다른 특징에 비해 높은 성능을 보였다. 추가적으로, 4단계 SNR의 잡음 환경에서 인식률은 shop 잡음 환경과 schoolyard 잡음 환경에서 각각 1.06 %, 0.65 % 향상했다.

• 한국물환경학회지
• /
• 제22권2호
• /
• pp.222-229
• /
• 2006

The treatment performance and operational parameters of a tertiary wastewater treatment process a biological filtration system were investigated. The biological filtration system consisted of a nitrification filter (Fiter 1) and a polishing filter with anoxic and aerobic parts (Filter 2). SS, T-C-BOD, and T-N in effluent were kept stable at less than 3, 5 mg/L, and 5 mgN/L, respectively, under a HRT in Filter (filter-bed) of 0.37~2.3 h. T-N at the outlet of Filter 2 were about 1~5 mgN/L under the condition of LV of 50~202 m/d. In Filter 2, denitrification was accomplished under LV of 50~168 m/d in a 1 m filter-bed. However, the denitrification capacity reached the maximum when the linear velocity was increased to 202 m/d. Relationship between increase in microorganism and headloss was clearer in Filter 2. As a result, the denitrification rate increased from 1.0~2.3 kgN/($m^3-filter-bed{\cdot}d$) as the headloss increased. The COD removal rate was 6.0~9.6 kgCOD/($m^3-filter-bed{\cdot}d$) when operated with Filters 1 and 2. These results mean that captured bacteria contributed a part of COD consumption and denitrification. The maximum nitrification and denitrification rate was 0.5 and 4 kgN/($m^3-filter-bed{\cdot}d$) in Filter 1 and 2.The ratio of backwashing water to the treated water was about 5~10 %. In Filter 1, wasted sludge in backwashing was only 0.7~5.3 gSS/($m^3$-treated water). In Filter 2, added methanol was converted into sludge and its value was 8.0~24 gSS/($m^3$-treated water). These results proved that this process is both convenient to install as tertiary treatment and cost effective to build and operate.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제53권2호
• /
• pp.111-117
• /
• 2004

The low-power design of the A/D converter is indispensable to achieve the compact bio-signal measuring device with long battery duration. In this paper, new decimation filter structure is proposed for the low-power design of the Sigma-Delta A/D converter in the bio-instruments. The proposed filter is based on the non-recursive structure of the CIC (Cascaded Integrator Comb) decimation filter in the Sigma-Delta A/D converter. By combining the CSD (Canonic Signed Digit) structure with common sub-expression sharing technique, the proposed decimation filter structure can significantly reduce the number of adders for implementation. For the fixed decimation factor of 16, the 15％ of power consumption saving is achieved in the proposed structure in comparison with that of the conventional polyphase CIC filter.

• 한국항공우주학회지
• /
• 제48권11호
• /
• pp.881-888
• /
• 2020

본 논문에서는 관측자가 얻을 수 있는 시선각(LOS) 측정값을 사용하여 관심표적의 상태변수를 추정하는 연구를 수행하였다. 관심상태변수는 표적의 위치, 속도 및 가속도로 설정하였다. 시선각 측정값은 필터에 표적운동모델 적용을 어렵게 하는 비선형성이 강한 측정값이다. 이러한 문제해결을 위해 가측정치 공식(Pseudomeasurement equation)을 사용하여 시선각 측정값 수식을 변경한 후 3D 가변선회(3D Variable Turn) 표적운동모델을 적용하였다. 또한 필터의 성능을 위해 기구학적구속조건(Kinematic Constraint)을 적용하였다. 필터는 초기조건에 강건한 특성을 가진 Bias Compensation Pseudomeasurement Filter (BCPMF)를 사용하였다. 병렬 계산의 이점을 위해 Two Stage Kalman Filter 형태를 추가적으로 적용하였다. 이 기법들을 사용하여 TBCPMF 3DVT-KC 필터를 제안하였고 시뮬레이션을 통해 성능을 확인하였다.

• ETRI Journal
• /
• 제33권2호
• /
• pp.169-175
• /
• 2011

This paper presents a double-sharpened decimation filter based on the application of a Kaiser and Hamming sharpening technique for multistandard wireless systems. The proposed double-sharpened decimation filter uses a pre-droop compensator which improves the passband response of a conventional cascaded integrator-comb filter so that it provides an efficient sharpening performance at half-speed with comparison to conventional sharpened filters. In this paper, the passband droop characteristics with compensation provides -1.6 dB for 1.25 MHz, -1.4 dB for 2.5 MHz, -1.3 dB for 5 MHz, and -1.0 dB for 10 MHz bandwidths, respectively. These results demonstrate that the proposed double-sharpened decimation filter is suitable for multistandard wireless applications.

• ETRI Journal
• /
• 제42권5호
• /
• pp.781-789
• /
• 2020

In this study, an E-band low-noise amplifier (LNA) monolithic microwave integrated circuit (MMIC) has been designed using silicon-germanium 130-nm bipolar complementary metal-oxide-semiconductor technology to suppress unwanted signal gain outside operating frequencies and improve the signal gain and noise figures at operating frequencies. The proposed impedance-controllable filter has series (R_s) and parallel (R_p) resistors instead of a conventional inductor-capacitor (L-C) filter without any resistor in an interstage matching circuit. Using the impedance-controllable filter instead of the conventional L-C filter, the unwanted high signal gains of the designed E-band LNA at frequencies of 54 GHz to 57 GHz are suppressed by 8 dB to 12 dB from 24 dB to 26 dB to 12 dB to 18 dB. The small-signal gain S₂₁ at the operating frequencies of 70 GHz to 95 GHz are only decreased by 1.4 dB to 2.4 dB from 21.6 dB to 25.4 dB to 19.2 dB to 24.0 dB. The fabricated E-band LNA MMIC with the proposed filter has a measured S₂₁ of 16 dB to 21 dB, input matching (S₁₁) of -14 dB to -5 dB, and output matching (S₂₂) of -19 dB to -4 dB at E-band operating frequencies of 70 GHz to 95 GHz.

• 한국전기전자재료학회논문지
• /
• 제16권7호
• /
• pp.593-598
• /
• 2003

In this paper, 3rd overtone mode energy-trapped filter using modified PbTiO$_3$ system ceramics was manufactured to apply for intermediate frequency(IF) SMD type fillet with splitted electrode and gap size. To investigate the effects of splitted electrode and gap size on filter characteristics of 3rd overtone mode energy-trapped filter, ceramic wafers were fabricated by etching splitted rectangular electrode size(b$\times$d) of b=0.4, 0.6, 0.8, 1mm, d=0.3, 0.4, 0.5, 0.6mm and gap size(c) c=0.2, 0.3, 0.4, 0.6mm, respectively. And then, SMD type ceramic filter were fabricated with the size of 3.7$\times$3.1$\textrm{mm}^2$. SMD type ceramic filter with the size of b=0.8mm, d=0.4mm and gap(c)=0.4mm, which showed insertion loss of 2.951dB, 3dB bandwidth of 54.7kHz and 20dB stop bandwidth of 129.27kHz, was suitable for IF bandpass filter application.