• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.1
• /
• pp.61-66
• /
• 2006

The simple Langmuir isotherm is frequently employed to describe the equilibrium behavior of protein adsorption on a wide variety of adsorbents. The two adjustable parameters of the Langmuir isotherm - the saturation capacity, or $q_m$, and the dissociation constant, $K_d$ - are usually estimated by fitting the isotherm equation to the equilibrium data acquired from batch equilibration experiments. In this study, we have evaluated the possibility of estimating $q_m$ and $K_d$ for the adsorption of bovine serum albumin to a cation exchanger using batch kinetic data. A rate model predicated on the kinetic form of the Langmuir isotherm, with three adjustable parameters ($q_m,\;K_d$, and a rate constant), was fitted to a single kinetic profile. The value of $q_m$ determined as the result of this approach was quantitatively consistent with the $q_m$ value derived from the traditional batch equilibrium data. However, the $K_d$ value could not be retrieved from the kinetic profile, as the model fit proved insensitive to this parameter. Sensitivity analysis provided significant insight into the identifiability of the three model parameters.

• The KIPS Transactions:PartD
• /
• v.10D no.2
• /
• pp.277-282
• /
• 2003

The knowledge discovery from web has been studied in many researches. There are some difficulties using web log for training data on efficient information predictive models. In this paper, we studied on the method to eliminate sparseness from web log data and to perform web user clustering. Using missing value imputation by Bayesian inference of MCMC, the sparseness of web data is removed. And web user clustering is performed using self organizing maps based on 3-D plot by principal component. Finally, using KDD Cup data, our experimental results were shown the problem solving process and the performance evaluation.

• Journal of Korea Multimedia Society
• /
• v.20 no.12
• /
• pp.1865-1873
• /
• 2017

The feature-based visual SLAM requires 3D positions for the extracted feature points to perform 3D-2D motion estimation. LiDAR can provide reliable and accurate 3D position information with low computational burden, while stereo camera has the problem of the impossibility of stereo matching in simple texture image region, the inaccuracy in depth value due to error contained in intrinsic and extrinsic camera parameter, and the limited number of depth value restricted by permissible stereo disparity. However, the sparsity of LiDAR data may increase the inaccuracy of motion estimation and can even lead to the result of motion estimation failure. Therefore, in this paper, we propose three interpolation methods which can be applied to interpolate sparse LiDAR data. Simulation results obtained by applying these three methods to a visual odometry algorithm demonstrates that the selective bilinear interpolation shows better performance in the view point of computation speed and accuracy.

• Korean Journal of English Language and Linguistics
• /
• v.3 no.3
• /
• pp.427-452
• /
• 2003

Korean is famous for having all voiceless stop sounds. Korean does have voiced stops but they are considered to exist only as the allophones of word initial /p, t, k/. My experiment shows the English word initial stop sounds [b, d, g] and the Korean lax stop series /p, t, k/ in word initial position are similar in the range of voice onset time. If English word initial[b, d, g] sounds are posited as voiced, then Korean word initial /p, t, k/ should be classified as voiced also. Phonetically English /b, d, g/ phonemes and Korean /p, t, k/ phonemes are very similar except the word initial [p, t, k] are devoiced slightly more, but not significant enough to be classified as voiceless than English word initial [b, d, g]. If we posit /b, d, g/ as Korean phonemes, it explains why Korean /p, t, k/ series has the allophones [b, d, g] instead of fortis stops /p', t', k'/ in Korean even though /p', t', k'/ has less positive VOT value than /p, t, k/. If we posit /b, d, g/ as Korean phonemes, then it does not cause spelling or pronunciation confusion either when Koreans learn English or English speakers learn Korean.

• Journal of environmental and Sanitary engineering
• /
• v.16 no.1
• /
• pp.18-26
• /
• 2001

The increase of economic growth has brought out the noise pollutions in city regions. To evaluate these problems, this study was investigated to assessment and analysis of noise pollutions at Cheongju area in winter and summer seasons. The noise levels were measured and analyzed at the general areas the 4 roadside areas (park, residential, commercial, and industrial area). As a result, following facts have been found. The equivalent sound levels(Leq) at general are in winter were 51.3∼78.2 dB(A) at the daytime and 41.1∼63.1 dB(A) at the nighttime And in summer there were 53.5∼77.3 dB(A) at the daytime and 41.9∼64.0 dB(A) at the nighttime, respectively. These values were higher than average value of Korea. At the roadside area, the values of Leq were 51.9∼72.8 dB(A) at the daytime, 44.3∼68.2 dB(a) at the nighttime in winter, and in summer there were 62.5∼73.1 dB(A) at the daytime and 50.4∼68.3 dB(A) at the nighttime, respectively. These values were lower than average value of Korea. The calculated traffic noise index(TNI) were 64.6∼93.6 at the daytime and 26.5∼106.6 at the nighttime in winter, In summer, there were 65.0∼90.7 at the daytime, and 32.3∼91.8 at the nighttime. The TNI values varied wide ranges at the nighttime according to traffic volumes.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.469-473
• /
• 1987

This paper presents a method to estimate p.d.f.(probability density function) of harmonic phasor voltage. Because the quantity of harmonics is not fixed, stochastic analysis of harmonics is needed. Because it is impossible to obtain p.d.f. of voltage from p.d.f. of current directly, the moments of voltage and current are used. Firstly, the moments of current is calculated from p.d.f. of current. Secondly, the moments of voltage are calculated from the moments of current using the linearity of the moments. Finally, p.d.f. of voltage is estimated from the moments of voltage using Gram-Charlier Type A Series. [1] The moments of the p.d.f. obtained by the series and of the true p.d.f. is same up to given finite moments. Because current and voltage of harmonics are represented as not instantaneous values but phasors, the estimated value can be compared with the measured value and harmonic phasor voltage can be analyzed when the p.d.f. of phase is nonuniform as well as uniform.

• International Journal of Automotive Technology
• /
• v.7 no.3
• /
• pp.277-282
• /
• 2006

With the aim of achieving half the regulated value of EURO-3 Emission Regulations, an ultra low emission motorcycle has been developed based on a motorcycle with an 1800 $cm^3$, horizontal opposed 6-cylinder engine. For the fuel supply system, an electronically controlled fuel injection system was applied. For the emission purification system, three-way catalysts, a feedback control system with a LAF(Linear Air-Fuel ratio) sensor, and a secondary air induction system were applied. To reduce CO and HC emissions during cold starting, an early catalyst activation method combining RACV(Rotary Air Control Valve) and retarded ignition timing was applied. After the catalyst activation, air-fuel ratio was controlled to maximize the purification ratio of the catalyst according to vehicle speed. For the air-fuel ratio control system, the LAF sensor was used. Furthermore, fine adjustment by the LAF feedback control reduced torque fluctuation due to the air-fuel ratio change. As a result, smooth ride feeling was maintained. Owing to these technologies, half the regulated value of EURO-3 has been achieved without any negative impact to the large-scaled motorcycles' drivability. This paper presents the developed ultra low emission technologies including the control method using an LAF sensor.

• Asian Journal of Turfgrass Science
• /
• v.10 no.3
• /
• pp.213-230
• /
• 1996

A study of occurrence and distribution of cellular slime molds(CSMs) in forest soils of central areas of Korea was carried out. Samples for CSMs isolation were collected from 4 study sites; Mt.Kyeryong, Mt. Taebaek, Mt. Sobaek and Mt. Sokri. In Mt. Kyeryong, six species were found. These were Dictyostelium fasciculatum, D.firmibasis, D. mucoroides, D. minutum, D. brefeldianum and Polysphondylium pallidum. The average number of species isolated at one site was 0.75, and average density(clones /g soil) was 292. The results of soil sample analyses were that the concentration of Pb was higher than any other areas. In Mt. Taebaek, seven species were found; D. fasciculatum, D.firmibasis, D. mucoroides, D. miuutum, P.pallidum. P. violaceum, P. candidum. The average number of species isolated at one site was 2.3,and average density was 1,108. Based on importance values calculated from study sites within each of three elevation ranges, several of the more widely distributed and abundant species have distribution patterns that show a response to elevation. In Mt. Sobaek, eleven species were found. These were D. fasciculatum. D.firmibasis, D. mucoroides, D. miuutum, D. brefeldianum, D. crassicaule,D. deminutivum, D. implicatum, P. pallidum. P. violaceum and P. candidum. The average number of species isolated at one site was 3, and average density was 793. Species diversity appeared to be the highest in this area. In Mt. Sokri, six species were found. These were D. fasciculatum. D. mucoroides, D. minutum, D. purpureum, P. pallidum. and P. violaceum. The average number of species isolated at one site was 2.4 and average density was 858. It was noticeable that D.purpureum were much more comrnonly found in this pinus evergreen forest. Key words: Cellular slime molds(CSMs), Importance value, Elevation, Average number of species, Average density.

• Imaging Science in Dentistry
• /
• v.32 no.1
• /
• pp.27-33
• /
• 2002

Purpose: To evaluate the influence of threshold value of computed tomography on the accuracy of rapid prototyping (RP) medical model Material and Methods : CT datas of a human dry skull were transferred from CT scanner via compact disk to a personal computer (PC). 3-dimensional image reconstruction on PC by V-works/sup TM/ 3.0 (CyberMed. Inc.) software and RP models fabrication were followed. 2-RP models were produced by threshold value of 500 and 800 selected in surface rendering process. Linear measurements between arbitrary 12 anatomical landmarks on dry skull, 3-D image model, and 2-RP models were done and compared. Thus, the accuracy of 500 RP and 800RP models was respectively evaluated. Results: There was mean difference (% difference) in absolute value of 2.27 mm (2.73%) between linear measurements of dry skull and 500 RP model. There was mean difference (% difference) in absolute value of 1.94 mm (2.52%) between linear measurements of dry skull and 800 RP model. Conclusion: Slight difference of threshold value in rendering process of 3-D modelling made a influence on the accuracy of RP medical model.

• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.4
• /
• pp.29-43
• /
• 2017

Innovation Cosystems are Conceptualized as Organizational Networks of Economic Actors, Technologies and Social Contexts that Interact for Knowledge Production, use, and Adaptation. This Paper Proposed a Conceptual Framework to Describe Value Co-creation of Organizational Networks Engaged in Technology Innovation. We Adopted Theory-Based Approach by Integrating the Perspective of Service-Dominant (S-D) Logic Into the Evolutionary Model of the Triple Helix. The Framework Gives a Plausible Explanation on how Actors Collaborate to Create Value in Dynamic Contexts of an Innovation Ecosystem. The Innovation Ecosystem can be Considered as a Composite of Sub-Ecosystems, Including Knowledge, Sectoral, and Business Ecosystems. When these Sub-Ecosystems are Recursively Transformed by Coordination of Functional Mechanisms that Serve Value Co-creation in the Innovation Process, the Innovation Ecosystem will be Re-Organized and Evolve. The case of the Digital Living Network Alliance (DLNA) was Examined to Demonstrate the Fundamental Mechanisms for Value Co-creation that was Described in the Framework. The case Study Indicates Features of Value Co-creation when Implementing Innovation in Organizational Networks.