• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.3
• /
• pp.363-373
• /
• 2010

"Curve number" (CN) indicates the runoff potential of an area. The US Soil Conservation Service (SCS)'s CN method is a simple, widely used, and efficient method for estimating the runoff from a rainfall event in a particular area, especially in ungauged basins. The use of soil maps requested from end-users was dominant up to about 80% of total use for estimating CN based rainfall-runoff. This study introduce the use of soil maps with respect to hydrologic and watershed management focused on hydrologic soil group and a case study resulted in assessing effective rainfall and runoff hydrograph based on SCS-CN method in a small watershed. The ratio of distribution areas for hydrologic soil group based on detailed soil map (1:25,000) of Korea were 42.2% (A), 29.4% (B), 18.5% (C), and 9.9% (D) for HSG 1995, and 35.1% (A), 15.7% (B), 5.5% (C), and 43.7% (D) for HSG 2006, respectively. The ratio of D group in HSG 2006 accounted for 43.7% of the total and 34.1% reclassified from A, B, and C groups of HSG 1995. Similarity between HSG 1995 and 2006 was about 55%. Our study area was located in Sosu-myeon, Goesan-gun including an approx. 44 $km^2$-catchment, Chungchungbuk-do. We used a digital elevation model (DEM) to delineate the catchments. The soils were classified into 4 hydrologic soil groups on the basis of measured infiltration rate and a model of the representative soils of the study area reported by Jung et al. 2006. Digital soil maps (1:5,000) were used for classifying hydrologic soil groups on the basis of soil series unit. Using high resolution satellite images, we delineated the boundary of each field or other parcel on computer screen, then surveyed the land use and cover in each. We calculated CN for each and used those data and a land use and cover map and a hydrologic soil map to estimate runoff. CN values, which are ranged from 0 (no runoff) to 100 (all precipitation runs off), of the catchment were 73 by HSG 1995 and 79 by HSG 2006, respectively. Each runoff response, peak runoff and time-to-peak, was examined using the SCS triangular synthetic unit hydrograph, and the results of HSG 2006 showed better agreement with the field observed data than those with use of HSG 1995.

• Journal of Korea Technology Innovation Society
• /
• v.21 no.2
• /
• pp.491-521
• /
• 2018

This paper aims to uncover success factors in technology transfer of Korean government sponsored research institutes. It presents an analytical framework of technology transfer integrating factors concerning actors, object and process. Qualitative analysis mainly based on In-depth interviews is designed and conducted to examine characteristics, similarities and differences of three types technology transfer including a supply-push model, a demand-pull model, and an interactive model. Empirical results show that capabilities and experiences of researchers, capabilities and willingness of the company and active communications in the technology transfer appear to be important factors. In particular, it was found that technology transfer was led by TLO in the demand-pull model. In addition, the demand-pull and interactive approaches tends to be more effective in the technology development and transfer process compared to the supply-push model. In other words, market-oriented R&D is needed instead of technology-driven R&D. This paper also pointed out that one of the major factors in successful technology transfer is the enhancement of TLO capacity, and the improvement of recognition about TLO.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.4D
• /
• pp.361-368
• /
• 2010

It is general that mostly congested sections of national backbone networks have been improved based on the national network expansion plan. However, in case of intermodal terminals which are origins of logistics, it is still so congested that travel time between origin and destination is long. Therefore, intermodal transportation systems plan of major intermodal terminals for the intermodal connector networks between intermodal terminal and national backbone network or intermodal terminal was established. With the limitation of priority methodology applying to intermodal connector facility under existing methodology, this study suggests an improved priority methodology. This study includes characteristics of terminal on the hierarchical structure and assessment list, but it does not concentrate on the specific terminal type through survey. To avoid a certain concentration, budget constraint for each terminal type was considered ahead of priority. Finally priority methodology was developed with two-step assessment under consideration that specific terminal is not involved in intermodal connector facility project. As a result of calculating weights by survey, effects such as d/c and accessibility fluctuations index through project implementation gain high weight, and degree of region underdevelopment gets next. Although the methodology in this study could not yields the priority by assessment list, it will be useful for setting the direction on policy related to intermodal connector facility projects.

• The Journal of Small Business Innovation
• /
• v.19 no.4
• /
• pp.1-17
• /
• 2016

The purpose of this study is to suggest an efficient way for ventures to achieve innovation performance through R&D cooperative arrangements. Achieving innovation is one of the critical factors for the survival of ventures. Unlike established firms, ventures often do not have the specialized assets necessary to take technological developments to the product and market stages. Young and resource-constrained firms can achieve innovation by finding and accessing to the complementary resources from R&D cooperation. In the current business environment, many firms are likely to engage in multiple simultaneous R&D cooperations with different partners. Recent research stream addresses the importance of efficient cooperation management from the holistic portfolio perspective. Since maintaining the multiple cooperative relations require substantial amount of time and effort, managing cooperative relationships play a more important role to resource-constrained firms. In order to find an efficient composition of R&D cooperative partners, we mainly focus on the diversity of partner type and dependence level in partnership. We analyze the data on Korean manufacturing ventures collected in the Korean Innovation Survey (KIS) which was conducted by the Science and Technology Policy Institute (STEPI). The KIS questionnaire assesses the existence of cooperative relationships with different types of partners respectively. The types of cooperating partners are affiliated companies, suppliers, clients & customers, competitors or other firms in the same industry, consulting firms, universities, and research institutes. We confirm that ventures obtain relatively higher benefits from R&D cooperation compared with established firms in terms of innovation performance. The results show that a moderate level of diversity in cooperative partner type composition increases innovation. Moreover, diversity of cooperation dependency among the partners enhances innovation performance. Likewise, concentrating on the quality aspects of cooperative composition, such as diversity of partners and degree of dependencies, this study offers some implications for ventures in managing partners from an integrative perspective.

• Fashion & Textile Research Journal
• /
• v.15 no.6
• /
• pp.977-984
• /
• 2013

This study classified the type of sole for female high school students and analyzed the characteristics of each type by the shape of the sole (plantar view) using 2D scan data. The data were collected from a foot anthropometry of 310 female high school students in Gwangju and Jeollanam-do. Left feet and right feet were measured indirectly by using flatbed scanner. The sole anthropometric measurements consisted of 24 items. The results of the investigation into the differences between left and right feet soles by the 2D measurements data indicated that there was no significant statistical differences in the length of items. The left sole had higher values than right sole in the width items and angle items; however, the lateral side of the right feet projected to the outside more often than left feet. In analyzing foot sole of female high school students, the shapes of sole were classified into three types. Type 1(41.94%), Type 2(36.77%), Type 3(21.29%). The most characteristic sole type for female high school students was Type 1. Type 1 referred to a narrow foot width with little or no curvature of the toe. Type 2 represented the longest foot, with foot width shown as a spacious and distinctive feature in width at the medial area of the foot. Type 3 represented the shortest and widest of ball width, gathered inside toe 5, and lateral side as the most projected among the three types.

• Journal of Korean Society of Forest Science
• /
• v.83 no.3
• /
• pp.400-409
• /
• 1994

To investigate the noise attenuation effects of various vegetation configurations, noise levels on 6 study sites along relatively heavy traffic roads were measured. The differences between noise level measures at 1m and 10m spots from the road range from 10 to 15dB depending upon the attributes of the vegetation. When flat grass land was set to control plot, the maximum noise attenuation at 10m spot was measured at the densely planted shrubs with 5dB difference. The areas on upward slope from the road showed the least attenuation effects. Based on the study results, an appropriate setting for low level residential area noise buffer belt would be densely planted shrubs with at least 3m width and 2m height. To be effective, 3m width soft areas covered with grasses are needed at the front and behind sides of the belt. More than 15dB of the noise level caused by the road traffic would be attenuated with the prescription.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.6
• /
• pp.658-662
• /
• 2001

The classification of surface flaw types was performed on the basis of angular dependence of backscattered ultrasound. The copper line adhered on the surface, cower line filled in groove, pure groove and the normal edge were adopted as various surface flaw patterns of glass specimen. A backward longitudinal profile was formed probably by the longitudinal wane scattering at and near 1st critical angle. The wave trains at the peak angles of the backward radiation profiles showed different shapes according to the superposition ratio of scattered and leaky waves. The asymmetry of the backward radiation profile arose due to the scattering effect of flaw. The additive resonance effect of copper line appeared in the left side of the profile. The peak angles of both the longitudinal and radiation profiles were shifted toward small angle by the scattering effect.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.72-72
• /
• 2021

가뭄은 수개월, 수년 이상에 걸쳐 서서히 발생 및 지속되며, 식생에 대한 피해가 발생할 때까지 확실한 인식이 어렵다. 최근에는 기후변화로 인하여 가뭄의 발생빈도가 증가하고 있으며, 기상 이상에 따른 다양한 형태의 가뭄이 발생하고 있다. 미국에서 정의한 'Flash Drought'는 비교적 짧은 기간 동안 표면온도의 상승과 비정상적으로 낮고 빠르게 감소하는 토양수분으로 인하여 식생에 대한 극심한 스트레스를 유발하면서 광범위한 작물 손실 및 용수공급 감소 등에 대한 피해를 야기하는 가뭄이다. 국내에서는 Flash Drought에 대한 모니터링이 활성화되지 않았기 때문에 본 연구에서는 '돌발가뭄'이라는 새로운 정의를 제시하면서 토양수분, 증발산량, 강수량, 기온 등의 가뭄 관련 주요인자를 활용하여 국내에서 발생한 돌발가뭄 (Flash Drought)를 감지하고 분석하고자 하였다. 돌발가뭄을 분석하기 위하여 선행연구에서 제시한 가뭄 관련 주요인자 기준 유형, 증발산량 기반 가뭄지수를 활용한 유형 등을 활용하였으며, 지상관측자료로는 국내 76개 종관기상관측 자료를 활용하였다. 또한, 토양수분 자료는 GRACE (Gravity Recovery and Climate Experiment) 위성영상 자료를 취득한 후 5 km 공간해상도 자료로 활용하였다. 가뭄지수의 경우 증발산 기반 가뭄지수 중 표준강수증발산지수 SPEI (Standardized Precipitation Evapotranspiration), 증발스트레스지수 ESI (Evaporative Stress Index) 등을 활용하여 국내 돌발가뭄 유형에 대한 분석에 적용하였다. 본 연구를 통하여 아직 명확하게 정의되지 않은 돌발가뭄에 대한 유형별 분석 및 국내 돌발가뭄의 수문기상학적 특성을 분석하고자 한다.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2017.11a
• /
• pp.159-169
• /
• 2017

정부는 R&D 재원의 전략적인 투자를 위해 199년에 국가과학기술위원회를 설치한 이후, R&D 예산 배분 조정을 지속적으로 추진하면서 개별 사업에 대한 예산조정 이전에 투자우선순위를 설정하였다. 그러나 그간의 투자우선순위 설정은 중장기 투자전략, 기본계획 등을 근거로 하기 때문에 중점적으로 투자해야 할 기술분야에 대해 정성적인 언급에만 머무를 수밖에 없고, 현재 연구트렌드를 반영하기 어려위 실제 R&D 예산 배분 시 구체적인 연계성이 부족한 실정이다. 이에 본 논문에서는 나노분야 R&D를 중심으로 키워드를 활용한 트렌드 분석을 통해 정부 R&D 예산 배분의 전략성을 제고할 수 있으며, 사업의 투자규모를 설정하는데 있어 투자우선순위와의 연관도를 높이는 방안을 제시하고자 한다.

• Journal of Convergence for Information Technology
• /
• v.9 no.5
• /
• pp.217-227
• /
• 2019

The purpose of this study had been conducted to figure out the relationship of DISC typy behavioral patterns between major satisfaction and job preference. The survey in this subject had been carried out for 192 dental hygiene students from April 1 to 10, 2019. The findings were as follows: Among the sub-factors of major satisfaction based on DISC typy behavioral patterns, S type is higher in the contents of instruction and the way of teaching, the type C and S are higher in school facilities and environments. Among the sub-factors of job preference based on DISC typy behavioral patterns, the type D is higher in honor, development and stability, the type S is higher in aptitude, interest, development, stability and working environment, and the type C is higher in aptitude and interest. As DISC typy behavioral patterns, major satisfaction, and job preference were found to be related to one another, this finding should be considered when teaching career guidance for college students.