• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권4호
• /
• pp.1884-1903
• /
• 2019

Device-to-Device (D2D) communications can provide proximity based services in the future 5G cellular networks. It allows short range communication in a limited area with the advantages of power saving, high data rate and traffic offloading. However, D2D communications may reuse the licensed channels with cellular communications and potentially result in critical interferences to nearby devices. To control the interference and improve network throughput in overlaid D2D cellular networks, a novel channel assignment approach is proposed in this paper. First, we characterize the performance of devices by using Poisson point process model. Then, we convert the throughput maximization problem into an optimal spectrum allocation problem with signal to interference plus noise ratio constraints and solve it, i.e., assigning appropriate fractions of channels to cellular communications and D2D communications. In order to mitigate the interferences between D2D devices, a cluster-based multi-channel assignment algorithm is proposed. The algorithm first cluster D2D communications into clusters to reduce the problem scale. After that, a multi-channel assignment algorithm is proposed to mitigate critical interferences among nearby devices for each D2D cluster individually. The simulation analysis conforms that the proposed algorithm can greatly increase system throughput.

• Journal of Mechanical Science and Technology
• /
• 제20권12호
• /
• pp.2203-2208
• /
• 2006

Both 1-D and 2-D analytic methods are used for a rectangular fin optimization. Optimum heat loss is taken as 98% of the maximum heat loss. Temperature profile using 2-D analytic method and relative error of temperature along the fin length between 1-D and 2-D analytic methods are presented. Increasing rate of the optimum heat loss with the variation of Biot number and decreasing rate of that with the variation of the fin base length are listed. Optimum fin tip length using 2-D analytic method and relative error of that between 1-D and 2-D analytic methods are presented as a function of Biot numbers ratio.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.784-787
• /
• 2006

We have developed a RGB polymer dispersed liquid crystal film (RGB PDLC). To obtain the color display, color pigments are mixed in the prepolymer. We have presented an electro-optical performance of our cell and analyzed the electro optical properties for varying LC/ pre-polymer ratio and polymer type.

• 대한기계학회논문집B
• /
• 제28권12호
• /
• pp.1608-1615
• /
• 2004

CFD data compression methods based on Full-3D and Quasi-1D supercompact multiwavelets are presented. Supercompact wavelets method provide advantageous benefit that it allows higher order accurate representation with compact support. Therefore it avoids unnecessary interaction with remotely located data across singularities such as shock. Full-3D wavelets entails appropriate cross-derivative scaling function & wavelets, hence it can allow highly accurate multi-spatial data representation. Quasi-1D method adopt 1D multiresolution by alternating the directions rather than solving huge transformation matrix in Full-3D method. Hence efficient and relatively handy data processing can be conducted. Several numerical tests show swift data processing as well as high data compression ratio for CFD simulation data.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2010년도 춘계 학술논문 발표대회 2부
• /
• pp.17-20
• /
• 2010

Recent Construction and Transportation R&D projects are larger in size, investment scale has been increasing rapidly. However, the results of Construction and Transportation in R & D are papers, patents and other results. So, the application record of R&D in the construction field is very lacking. In particular, Construction New Technology's ratio in the midst of R&D's results are about 2.29%. Therefore, this study suggested program that R&D's results has been connected Construction New Technology. The introduction of the new system has greatly increased Construction New Technology and the results of excellent &D will be applied in construction field. So, Cost-reduction and technology's improvement are expected.

• Journal of Nutrition and Health
• /
• 제49권1호
• /
• pp.28-35
• /
• 2016

한국 성인 여성들을 대상으로 비타민 D 영양상태에 대한 기초자료를 얻고자 혈청 $25(OH)D_3$ 수준, 신체계측 및 체조성 분석, 일조시간 활동량, 혈중 지질 농도 및 아디포카인 농도를 측정하여, 혈중 $25(OH)D_3$ 수준과 비만지표와의 관계를 분석하였다. 156명의 연구 대상자 중 혈중 $25(OH)D_3$ 농도가 12 ng/ml 미만은 77% (121명)로 결핍상태에 해당하였고, 12~19.9 ng/ml는 19.2% (30명)으로 불충분상태에 해당하였으며 충분상태에 해당하는 20 ng/ml 이상은 3.2% (5명)으로 나타났다. 혈중 $25(OH)D_3$ 농도는 체중, 체질량지수, 체지방량, 허리엉덩이 비율과 유의한 양의 상관관계가 있어 비만지표와 양의 상관성을 보였다. 이러한 결과는 우리나라 성인 여성의 비타민 D 영양상태가 취약한 상태이고, 비만과의 관련 가능성이 있음을 나타내며, 이에 비타민 D 결핍예방을 위한 방안 강구가 필요함을 시사한다.

• 수산해양기술연구
• /
• 제39권4호
• /
• pp.269-275
• /
• 2003

제주도 연안 정치망의 여름철 주 어획대상인 잿방어를 실험어로 하여, 음향을 이용한 어군행동 제어, 음향순치 등 바다목장 조성을 위한 어군의 관리, 사육, 어획기술에 이용할 기초자료를 제공할 목적으로 육상수조에서 수중 가청 저주파음과 전기충격을 이용하여 음향 학습 시킨 후, 주파수와 음압을 변화시켜가면서 잿방어의 섬전도를 도출 하여 심박간격의 변화로부터 청각문턱치, 청각임계비를 측정하였다. 자연환경소음에서 잿방어의 청각문턱치는 측정 주파수 80∼800 HZ의 수중 가청음을 모두 인식하였고, 측정 주파수 200∼500 HZ 에서 청각 감도가 양호하였으며, 측정 주파수 300 Hz에서 평균 음압 94.5 dB, 표준편차 4.5 dB로 가장 낮은 청각문턱치를 보였다. 평균 음압을 65 dB, 70 dB, 75 dB의 3단계로 변화시킨 백색잡음 방성으로 측정한 잿방어의 청각임계비는 측정 주파수 80, 100, 200, 300, 400, 500, 800 HZ에서 각각 평균 음압 45.9, 52.8, 42.5, 36.4, 38.6, 39.4, 44.4 dB이었다. 측정 주파수 300 HZ, 400 HZ 그리고 500 HZ 에서는 백색잡음 중에서 측정음을 식별하는 능력이 다른 측정 주파수에 비하여 우수했다. 잿방어가 주파수 300 HZ의 수중 가청음을 충분히 인식하기 위해서는 최저 100 dB 이상의 음압 강도가 펼요하며 환경 소음이 존재하는 환경에서는 소음 스펙트럼 음압 레벨보다 약 35 dB 이상 크게 방성할 펼요가 있다.

• Geomechanics and Engineering
• /
• 제11권3호
• /
• pp.385-400
• /
• 2016

Bearing capacity of open-ended piles depends largely on inner frictional resistance, which is influenced by the degree of soil plugging. While a fully-plugged open-ended pile produces a bearing capacity similar to a closed-ended pile, fully coring (or unplugged) pile produces a much smaller bearing capacity. In general, open-ended piles are driven under partially-plugged mode. The formation of soil plug may depend on many factors, including wall thickness at the pile tip (or inner pile diameter), sleeve height of the thickened wall at the pile tip and relative density. In this paper, we studied the effects of wall thickness at the pile base and sleeve height of the thickened wall at the pile tip on bearing capacity using laboratory model tests. The tests were conducted on a medium dense sandy ground. The model piles with different tip thicknesses and sleeve heights of thickened wall at the pile tip were tested. The results were also discussed using the incremental filling ratio and plug length ratio, which are generally used to describe the degree of soil plugging. The results showed that the bearing capacity increases with tip thickness. The bearing capacity of piles of smaller sleeve length (e.g., ${\leq}1D$; D is pile outer diameter) was found to be dependent on the sleeve length, while it is independent on the sleeve length of greater than a 1D length. We also found that the soil plug height is dependent on wall thickness at the pile base. The results on the incremental filling ratio revealed that the thinner walled piles produce higher degree of soil plugging at greater penetration depths. The results also revealed that the soil plug height is dependent on sleeve length of up to 2D length and independent beyond a 2D length. The piles of a smaller sleeve length (e.g., ${\leq}1D$) produce higher degree of soil plugging at shallow penetration depths while the piles of a larger sleeve length (e.g., ${\geq}2D$) produce higher degree of soil plugging at greater penetration depths.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.367-369
• /
• 2002

We have designed ramp profile excitation pulse based on the Shinnar-Le Roux (SLR) algorithm. The algorithm provides many advantages to pulse designers. The first advantage is the freedom of deciding the amplitudes, frequencies, and ripple sizes of stopband, passband, and transition band of pulse profile. The second advantage is the freedom of deciding the pulse phase, more specifically, minimum phase, linear phase, maximum phase, and any phase between them. The minimum phase pulse is the best choice in the case of 3D TOF, because it minimizes the echo time, which implies the best image quality in the same MR examination condition. In addition, the half echo technique is slightly modified in our case. In general, using the half echo technique means that the acquired data size is half and the rest part can be filled with complex conjugate of acquired data. But in our case, the echo center is just shifted to left, which implies the reduction of echo time, and the acquired data size is the same as the one without using the half echo technique. In this case, the increase of right part of data leads to improvement of the resolution and the decrease of left part of data leads to decrease of signal to noise ratio. Since in the case of 3D TOF, the signal to noise ratio is sufficiently high and the resolution is more important than signal to noise ratio, the proposed method appears to be significantly affective and gives rise to the improved high resolution angiograms.

• 한국콘텐츠학회논문지
• /
• 제15권6호
• /
• pp.445-454
• /
• 2015

본 연구는 우리나라 코스닥 제약기업을 대상으로 소유구조가 제약기업의 연구개발투자(R&D)에 미치는 영향을 분석하였다. 실증분석을 위한 표본은 2000년부터 2012년까지 상장된 기업들 중 코스닥 제약기업을 대상으로 하였으며사용된 전체 표본은 13개년 자료로써 358개 관측치를 가진 불균형패널자료이다. 본 연구에 사용된 주요 변수들 중 개별기업 별 재무자료는 상장회사 협의회의 TS-2000을, 임원현황 및 주주분포 등은 금융감독원 전자공시 시스템의 각 기업 사업보고서 자료를 통해 자료를 직접 수집하였으며 기업나이, 기업크기 등은 NICE신용평가정보의 KISVALUE-III 등의 자료를 참고하였다. 연구결과, 첫째 주요주주율과 외국인투자율은 연구개발투자에 긍정적인 영향을 미쳤다. 둘째, 사외이사율은 연구개발투자에 부정적인 영향을 미쳤다. 셋째, 기관투자율은 통계적으로 유의한 결과를 미치지 못했다.