• Journal of Environmental Health Sciences
• /
• v.29 no.1
• /
• pp.62-66
• /
• 2003

The biological denitrification batch tests were conducted to optimize the operating conditions with various temperature and initial SCO $D_{Cr}$ /N $O_3$-N ratio. and the denitrification rates were analyzed various SCO $D_{Cr}$ /N $o_3$-N ratio of influent with swine wastes fermented and temperature. The finishing time of denitrification was within 15 hours, 12 hours, and 6 hours as the temperature of denitrification applied were 15$\pm$1$^{\circ}C$, 25$\pm$1$^{\circ}C$, and 31$\pm$1$^{\circ}C$, respectively. From the batch tests, denitrification rate was operated with over 3 of SCO $D_{Cr}$ /N $O_3$-N ratio. Denitrification rate was increased as the temperature of denitrification, increased such as 2.40-3.90 mg N $O_3$-N/gMLVSSㆍhr, 6.10-7.60 mgN $O_3$-N/gMLVSSㆍhr, and 14.40-15.88 mgN $O_3$-N/gMLVSSㆍhr, respectively. The denitrification rate was increased as the ratio of initial SCO $D_{Cr}$ N $O_3$-N increased. However, it was found that the suitable ratio of SCO $D_{Cr}$ /N $O_3$-N for denitrification should be considered because the ratio of mg SCO $D_{Cr}$ , consumed per mg N $O_3$-N removed varied depend on the influent SCO $D_{Cr}$ /TKN ratios.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.3
• /
• pp.338-345
• /
• 2001

An experiment was conducted to determine the optimal inclusion ratio of spray dried plasma protein (SDPP) and dried porcine solubles (DPS) for maximizing growth and improving immunity in weaned pigs. One hundred-fifty male (barrow) pigs were allotted in a completely randomized block design. Treatments were as follows: 1) control (6% SDPP), 2) S6D6 (6% SDPP+6% DPS), 3) S6D3 (6% SDPP+3% DPS), 4) S3D6 (3% SDPP+6% DPS) and 5) S3D3 (3% SDPP+3% DPS). Each treatment has 6 replicates with 5 pigs per replicate. Average daily gain (ADG) and average daily feed intake (ADFI) were highest, but not significantly different when pigs were fed a diet contained 6% SDPP and DPS from d 0 to 7 after weaning. Pigs fed the S6D3 diet showed better weight gain and feed intake than other treatments, especially compared with pigs fed S3D6 diet (p<0.05) from d 8 to 21 after weaning. For the overall experimental period, pigs fed the S6D3 diet showed the best improvement in ADG and ADFI. The digestibilities of dry matter (DM) and crude protein (CP) were higher in pigs fed the S6D6 diet than other diets from d 0 to 7 after weaning. However, pigs fed S6D3 diet showed higher DM, CP and essential amino acids (except methionine and arginine) digestibilities than pigs fed other diets from d 8 to 21 after weaning, although there was no significant difference. From d 8 to 21 after weaning, threonine, valine, isoleucine and leucine digestibilites were higher in S6D6 group, and phenyalanine, histidine, lysine and arginine digestibility were higher in S6D3 group than other groups. The ratio of CD4 and CD8 positive lymphocytes during the overall experimental period was independent of the ratio of SDPP and DPS. However, CD4+:CD8+ ratio was numerically lowered in pigs fed diet the S6D3 diet. Therefore, the present study suggests that an optimal inclusion ratio for maximizing growth performance and maintaining low immune status is 6% of SDPP and 3% of DPS in weaned pigs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1497-1499
• /
• 2007

Visual perception experiments were conducted to determine the acceptable limit of the contrast ratio of LCD TV under the watching condition. The results showed that the corresponding contrast ratio should be below 10,000:1 at the 3H(height of screen) distance in the living room environment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2170-2177
• /
• 2012

The ratio of index finger length to ring finger length(2D:4D) is an index of prenatal testosterone and/or estrogen exposure. The aim of this study is to investigate digit ratio and the type of gender-role orientation, to identify the correlation between 2D:4D and gender-role orientation in health and medical students. Participants were 120 male and 146 female university students majoring in health or medicine. After filling in KSRI(Korean Sex Role Inventory), 2nd and 4th finger lengths were measured on both hands using vernier callipers with photocopy. This study showed 2D:4D in the males was 0.95, and that in the females was 0.96 (p<0.01). 38.3% male students revealed androgyny, on the other hand, 35.6% female students revealed undifferentiated type from KSRI. And also, there was a significant difference in masculinity score between male and female but not in feminity score. There was no significant difference in 2D:4D according gender role orientation. The KSRI masculinity score was negatively related to 2D:4D of left hand in male (p<0.05). The results of this study suggest that a more masculine gender role orientation in males is associated with low 2D:4D revealing higher testosterone and/or lower estrogen level in utero. However, more research in 2D:4D ratio to Korean is needed for support of this result.

• Fashion & Textile Research Journal
• /
• v.9 no.4
• /
• pp.418-424
• /
• 2007

The purpose of this study is to propose a standard of converting 3D shape of men in twenties to 2D patterns. This can be a basis for scientific and automatic pattern making for high quality custom clothes. Firstly, representative 3D body shape of men was modeled. Then the 3D model was divided into 3 shells, front, side and back. Among them, the front shell was divided into 4 blocks by bust line and princess line. Secondly, curves are generated on each block according to matrix combination by grid method. Then triangles were developed into 2D pieces by reflecting the 3D curve length. The grid was arranged to maintain outer curve length. Next, the area of developed pieces and block were calculated and difference ratio between the block area and the developed pieces' area is calculated. Also, area difference ratio by the number of triangles is calculated. The difference ratio was represented as graphs and optimal section is selected by the shape of graphs. The optimal matrix was set considering connection with other blocks. Curves of torso upper front shell were regenerated by the optimal matrix and developed into pieces. We validated it's suitability by comparing difference ratio between the block area and the developed pieces' area of optimal section. The results showed that there was no significant difference between block area and the pieces' area developed by optimal matrix. The optimal matrix for 2D developing could be characterized as two types according to block's shape characteristics, one is affected by triangle number, the other is affected by number of raws more than columns. Through this study, both the 2D pattern developing from 3D body shape and 3D modeling from 2D pattern is possible, so it's standardization also possible.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.2
• /
• pp.84-91
• /
• 2006

A heavy duty hydrogen-natural gas fueled engine can obtain stable operation at ultra lean conditions and reduce emissions extremely. Reduction of $CO_2$ in its engine is one of the most benefit. In this study, rate of hydrogen addition($R_{dH2}$) and compression ratio($\varepsilon$) were investigated including performance of this engine. As results, it was found that phenomenon of pressure oscillation when increasing $R_{dH2}$ and $\varepsilon$, it means occurring knock. It consider that pressure oscillation was increased due to fast burning speed of hydrogen. Even if same compression ratio, pressure oscillation was remarkable increased according to increasing $R_{dH2}$. Therefore, limit compression ratio of knock occurring was reduced by increasing $R_{dH2}$.

• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.4
• /
• pp.360-364
• /
• 1996

Study on germination ratio and growth of lettuce affected by accumulated salt in vinyl house cultivation soils was investigated by pot test with EC 1.65. 3.50, 5.75. 7.15. 9.50 and 13.57 dS/m. (Germination rate of lettuce in different electric conductivity of 0, 2, 4, 6, 8 and 10 dS/m controlled with KCl were 96.7, 96.7, 87.8, 82.2, 52.2, and 27.8 % respectively. Standing ratio of lettuce in soil below 6 dS/m was more than 60% and in soils of 7.15, 9.50 and 13.57 dS/m they were 45, 32 and 31%, respectively. Growth and fresh weight of lettuces increased significantly in a low EC content soil. The fresh weight of lettuces in the soil of EC 3.50 dS/m was higher than that of the soil EC 1.65 dS/m by 22%, while another soils(EC: 5.75, 7.15, 9.50 and 13.57 dS/m) were decreased 3, 15, 60 and 62%, respectively. Relationship between soil EC and standing ratio of lettuce showed high correlation coefficient($r=-0.9057^{**}$). Therefore, in the field of vinyl houses concentrated salt, standing ratio of lettuce can be foreseen by soil EC [Y = -4.313x+ 82.95 (Y:standing ratio, x:soil EC)], also standing ratio and fresh weight of lettuce showed high correlation coefficient($r=0.8396^{**}$).

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.6
• /
• pp.697-702
• /
• 2019

We propose a multi-band multi-scale DenseNet with dilated convolution that separates background music signals from broadcast content. Dilated convolution can learn the multi-scale context information represented by spectrogram. In computer simulation experiments, the proposed architecture is shown to improve Signal to Distortion Ratio (SDR) by 0.15 dB and 0.27 dB in 0dB and -10 dB Signal to Noise Ratio (SNR) environments, respectively.

• Bulletin of the Korean Mathematical Society
• /
• v.55 no.5
• /
• pp.1317-1332
• /
• 2018

In this paper, we introduce the D-ratio of a rational map $f:{\mathbb{P}}^n{\dashrightarrow}{\mathbb{P}}^n$, defined over ${\bar{\mathbb{Q}}}$, whose indeterminacy locus is contained in a hyperplane H on ${\mathbb{P}}^n$. The D-ratio r(f; ${\bar{V}}$) characterizes endomorphisms and provides a useful height inequality on ${\mathbb{P}}^n({\bar{\mathbb{Q}}}){\backslash}H$. We also provide a dynamical application: preperiodic points of dynamical systems of small D-ratio are of bounded height.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.6
• /
• pp.772-779
• /
• 2011

New type of syngas generator based on the partial oxidation of biogas in volumetric permeable matrix reformers was suggested as an effective, adaptable and relatively simple way of syngas and hydrogen production for various low-scale applications. The use of biogas as an energy source reduces the chance of possible emission of two greenhouse gases, $CH_4$ and $CO_2$, into the atmosphere at the same time. Its nature of being a reproducible energy source makes its use even more attractive. Parametric screening studies were achieved as air ratio, biogas component ratio, input gas temperature, Steam/Carbon ratio. As the air ratio was low, the production of the hydrogen and carbon monoxide increased in the condition that 3D matrix reformer maintains the stable driving. As it was the simulation biogas in which the carbon dioxide content is high, the flammable range became narrow. And the flammable range was extended if the injected gas was preheated. The stable driving was possible in the low air ratio. The amount of hydrogen production was increased as S/C ratio increased.