• JSTS:Journal of Semiconductor Technology and Science
• /
• v.2 no.2
• /
• pp.125-131
• /
• 2002

This paper presents MMIC drive and power amplifiers covering 6-18 ㎓. For simple wideband impedance matching and less sensitivity to fabrication variation, modified distributed topologies are employed in the both amplifiers. Cascade amplifiers with a self-biasing circuit through feedback resistors are used as unit gain blocks in the drive amplifier, resulting in high gain, high stability, and compact chip size. Self impedance matching and high-pass, low-pass impedance matching networks are used in the power amplifier. In measured results, the drive amplifier showed good return losses ($S_11,{\;}S_{22}{\;}<{\;}-10.5{\;}dB$), gain flatness ($S_{21}={\;}16{\;}{\pm}0.6{\;}dB$), and $P_{1dB}{\;}>{\;}22{\;}dBm$ over 6-18 GHz. The power amplifier showed $P_{1dB}{\;}>{\;}28.8{\;}dBm$ and $P_{sat}{\;}{\approx}{\;}30.0{\;}dBm$ with good small signal characteristics ($S_{11}<-10{\;}dB,{\;}S_{22}{\;}<{\;}-6{\;}dB,{\;}and{\;}S_{21}={\;}18.5{\;}{\pm}{\;}1.25{\;}dB$) over 6-18 GHz.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.2
• /
• pp.66-71
• /
• 2003

This study was carried out to obtain basic data for selecting the applicable crops in reclaimed land and to provide guidelines for the rotation between paddy and upland cropping. Field experiment was conducted with six summer crops(garland chrysanthemum, young radish, small radish, kale, lettuce, red lettuce) at Dae-Ho reclaimed experiment plots in Dangjin province. Dry weights and plant heights of harvested crops were measured and soil chemical properties were analyzed. Plant height and dry weight decreased significantly with increasing soil saturation paste extract electrical conductivity(ECe) and sodium adsorption ratio(SAR). The threshold ECe of salt inhibition for six crops was less than $1dS\;m^{-1}$ for young radish and kale, greater than $4dS\;m^{-1}$ for garland chrysanthemum, and greater than $6dS\;m^{-1}$ for small radish, lettuce, and red lettuce. At higher ECe that inhibits crop growth, with every increase in $1dS\;m^{-1}$, dry weight index decreased by 3.35 for kale, 3.92 for small radish, 3.98 for young radish, 4.66 for lettuce, 7.57 for garland chrysanthemum, and 8.45% for red lettuce, respectively. The ECe causing 50% reduction of dry weight index was $18.9dS\;m^{-1}$ for small radish, $17.3dS\;m^{-1}$ for lettuce, $15.4dS\;m^{-1}$ for kale, $12.0dS\;m^{-1}$ for red lettuce, $11.3dS\;m^{-1}$ for young radish, and $11.0dS\;m^{-1}$ for garland chrysanthemum. Among the tested 6 summer crops through field experiment and in-situ survey, kale was proved to be a favorable vegetable crop at reclaimed tidal land.

• 한국가스학회:학술대회논문집
• /
• 2001.10a
• /
• pp.173-183
• /
• 2001

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2010.05b
• /
• pp.17-20
• /
• 2010

Recent Construction and Transportation R&D projects are larger in size, investment scale has been increasing rapidly. However, the results of Construction and Transportation in R & D are papers, patents and other results. So, the application record of R&D in the construction field is very lacking. In particular, Construction New Technology's ratio in the midst of R&D's results are about 2.29%. Therefore, this study suggested program that R&D's results has been connected Construction New Technology. The introduction of the new system has greatly increased Construction New Technology and the results of excellent &D will be applied in construction field. So, Cost-reduction and technology's improvement are expected.

• Bulletin of the Korean Mathematical Society
• /
• v.57 no.3
• /
• pp.691-707
• /
• 2020

In this paper, we introduce and study the notions of weakly ⊕-supplemented modules, weakly D2 modules and weakly D2-covers. A right R-module M is called weakly ⊕-supplemented if every non-small submodule of M has a supplement that is not essential in M, and module M_R is called weakly D2 if it satisfies the condition: for every s ∈ S and s ≠ 0, if there exists n ∈ ℕ such that sⁿ ≠ 0 and Im(sⁿ) is a direct summand of M, then Ker(sⁿ) is a direct summand of M. The class of weakly ⊕-supplemented-modules and weakly D2 modules contains ⊕-supplemented modules and D2 modules, respectively, and they are equivalent in case M is uniform, and projective, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.781-784
• /
• 2005

We have developed technology to fabricate large-size active matrix organic light-emitting diode (AMOLED) displays with good color purity. Using these innovations, we have developed a 40inch diagonal WXGA AMOLED full color display. Because the TFT circuitry occupies a large portion of the pixel structure, an efficient white emission OLED is essential to integrate the device onto the active matrix backplane. The development of these technologies enables OLED displays to fulfill the requirements for larger size applications such as HDTVs

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.3-5
• /
• 1999

The 4-pole LHSM was composed of the figure-of-eight shaped 3-phase armature windings, DC field windings, and the segmented secondary with the transverse bar track. Three dimensional model of LHSM provided the equivalent reluctance and PM model for 2D FEA. From these 2D FEA models, when the motor was fed by DC and 3-phase currents, the magnetic field were calculated and compared with the results of 3D FEA.

• Proceedings of the KSAR Conference
• /
• 2004.06a
• /
• pp.254-254
• /
• 2004

The aim of this study was two purpose: to compare recovery of embryos/follicle number from superovulated Holsteins(H) and Korean Native Cows(KNC) by flushing the uterine horns through insertion of the catheter and to evaluate the hormonal and superovulatory response to estradiol benzoate(EB) treatment prior to superovulation. (omitted)

• Electronics and Telecommunications Trends
• /
• v.31 no.1
• /
• pp.134-145
• /
• 2016

최근 3D 프린팅이 제조업의 혁신을 이끌 새로운 키워드로 주목을 받으면서 하드웨어인 3D 프린터를 비롯해 각종 프린팅 재료, 프린팅 대상을 만들 수 있는 3D 저작 및 편집 소프트웨어에 이르기까지 관련 분야에 대한 관심과 지원이 빠르게 확산되는 추세다. 특히, 개인의 아이디어를 3D 프린터로 직접 출력할 수 있다는 점이 강조되면서 개인용 3D 콘텐츠 제작을 위해 필요한 저작/편집도구의 수요가 급격히 증가하고 있다. 더불어 3D 프린팅 출력 대상이 개인화되고 사용자의 기호에 따른 맞춤형으로 변하면서, 3D 콘텐츠 제작에 필수적인 소프트웨어 개발 업체의 영향력이 하드웨어 제조사보다 더욱 커지고 있다. 3D 프린팅 관련 세계적 기술 및 수요 변화에 발맞춰 본고에서는 3D 프린팅용 콘텐츠를 제작할 수 있는 3D 저작/편집도구 및 연구동향을 살펴보고, 다양한 응용을 목적으로 ETRI에서 개발 중인 3D 프린팅용 편집기술을 소개하고자 한다.

• Horticultural Science & Technology
• /
• v.19 no.4
• /
• pp.501-504
• /
• 2001

The effect of soil EC on tissue morphology of leaf and shoot tip in cucumber (Cucumis sativus L. cv. Euinchim-baekdadagi) seedlings was investigated. Number of trichomes on leaf upper epidermis increased with the increase in soil EC from 1.0 to $3.0dS{\cdot}m^{-1}$, but the shape and number of stomata on lower epidermis remained unchanged. Epidermal cells of cucumbers grown in EC $1.5dS{\cdot}m^{-1}$ soil was occupied mostly by large vacuole whereas those grown in EC $3.0dS{\cdot}m^{-1}$ soil were filled with a nucleus, mitochondria, chloroplast and other micro-organelles. Sponge parenchima cells were also larger and contained fewer chloroplasts at EC $1.5dS{\cdot}m^{-1}$ than those grown at EC $3.0dS{\cdot}m^{-1}$. Leaf thickness decreased at high EC and the color of epidermal cells became significantly darker on the photograph of optical microscope. Normal tissue differentiation was greatly suppressed in plants grown in soils with $3.5dS{\cdot}m^{-1}$ or higher EC.