• Journal of Radiation Protection and Research
• /
• v.16 no.2
• /
• pp.27-39
• /
• 1991

The diffusion of Sr-85, Cs-137, Co-60 and Am-241 in compacted domestic bentonite was studied, using a diffusion cell unit in which diffusion took place axially from the center of cylindrical bentonite sample body. The effects of compaction density and heat-treated bentonite on diffusion were analysed. And the diffusion mechanism of radionuclide was also analysed by evaluating the measured diffusivity of anion Cl-36. The apparent diffusivities obtained for Sr-85, Cs-137, Co-60 and Am-241 were $l.07{\times}10^{-11},\;6.705{\times}10^{-13},\;l.226{\times}10^{-13}\;and\; l.310{\times}10^{-14}m^2/sec$, respectively. When the as-pressed density of bentonite increased from $1.8\;to\;2.0g/cm^3$, the apparent diffusivity of Cs-137 decreased by quarter. In the case of bentonite heat-treated to $150^{\circ}C$, no significant change in diffusivity was observed, which showed the possibility that the domestic bentonite could be used as a chemical barrier to retard the radionuclide migration at below $150^{\circ}C$. From the calculated pore and surface diffusivity, the surface diffusion due to the concentration gradient of radionuclide sorbed on the solid phase was found to dominate greatly in total transport process.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.05
• /
• pp.199-202
• /
• 1996

Artificial hearts are intended for use in patients with severe forms of heart disease for which no surgical repair is possible. The moving-actuator pump was developed to decrease the overall volume size of the electromechanical total artificial heart (TAH) by eliminating the occupied space of the fixed-actuator in the conventional pusher-plate type pump. In our pump, the actuator moves back and forth for alternative ejections of left and right ventricles. The problem of fitting the TAH to atrial remnants and arterial vessels could also be improved by circular or penduluous mot ion of the actuator instead of linear mot ion of the pusher-plate in the conventional pumps. We have evaluated two types of moving- actuator pump; one is a rolling cylinder type, and the other a pendulum type pump. In the rolling cylinder pump, frictional energy loss exists between the pump housing's guide bars and the actuator's end caps, while the bottom rack under the cylindrical actuator increases the height of the pump, the pump is therefor not implantable inside the small chest of human-sized animals with a body weight of less than 70kg. The new human type pump has a penduluous mot ion actuator to correct the above problems while maintaining the advantage of the moving- actuator's small total volume. The totally implantable TAH is composed of a blood pump, a control system and pheriperal equipments. The blood pump, which is constructed by a moving actuator, a right and left blood sac, and four artificial valves, is implanted in the thoracic. In 1988, the first implantation of the rolling cylinder TAH was performed into a female calf weighing 100kg, and the cal f recovered to the degree of voluntary standing and eat ing and survived to 100 hrs. We then survived two female sheep weighing about 63kg with the new human type TAH for three days.

• Journal of Mushroom
• /
• v.18 no.2
• /
• pp.145-150
• /
• 2020

A new cultivar, 'Bambithyang', was bred from monokaryotic strains of Sanbaekhyang and SANJO 707ho using the mono-mono hybridization method. Its incubation period was determined to be 100 days and its optimum temperature for fruit body flushing, 11-20℃. The mushrooms had a convex cap (diameter, 69.6 mm; thickness, 15.2 mm) and stipes in their center. The color of their upper sides was chestnut brown; their gills were arranged in a ripple style and had medium density. Their scales were cream-colored and fully distributed; the stipes were cream-colored and cylindrical (thick upper part). They also had cream colored fluffs and sporadic fruiting bodies. Zone lines were present when they were cultivated with mother and father varieties. Their stipe lengths and caps were 9% shorter and 16.9% thicker, respectively, than those of Sanbaekhyang.

• Parasites, Hosts and Diseases
• /
• v.54 no.5
• /
• pp.667-671
• /
• 2016

Myiasis is a relatively common infection of animals kept as pets, although only 1 case of canine myiasis has been described so far in the Republic of Korea. In the present study, we report an additional case of canine wound myiasis with identification of its causative agent, Lucilia sericata. An 8-year-old male Siberian husky dog was referred with anorexia, vomiting, and diarrhea to the Chungbuk National University Veterinary Medical Center, Cheongju-si (city), Chungcheongbuk-do (province), Korea in July 2013. Physical examination indicated the patient had a deep wound filled with a maggot swarm as a left gluteal lesion. A total of 216 maggots were removed by forceps, and the wounded area was sponged with gauzes and disinfected with 70% alcohol and a povidone-iodine solution. After daily care and suturing the wound, the patient was discharged at day 19 after admission. Recovered worms possessed morphological characteristics similar to those of L. sericata, namely, a sub-cylindrical body with 6-8 lobed anterior spiracles, round shaped with a button surrounded by a peritremal ring with no gaps, and similar distances between dorsal, median, and outer papillae of the 12th segment. Additionally, cox1 partial sequences (528 bp) obtained in the present study showed 100% identity with those of L. sericata (GenBank no. KT272854.1). L. sericata is indicated as a pathogen of myiasis infection not only in humans, but also in animals kept as pets in Korea.

• The Korean Journal of Mycology
• /
• v.47 no.2
• /
• pp.173-179
• /
• 2019

Sawdust cultivation of Lentinula edodes has been increasing in Korea. Fourteen strains were used to develop the best varieties of L. edodes, and hybridization was carried out by monohybrid cross. The number of hybridized strains was 1,638 among 3,100 combinations. They were cultivated on sawdust medium, and fruiting bodies were formed in 364 strains. Among them, 65 strains were selected as superior candidate strains based on the shape and size of the fruiting bodies. Forty strains formed fruiting bodies without lamellae structure. The shape of the stipe was cylindrical (255 strains), thick to lower part (15 strains), and thick to upper part (94 strains). By the combinations of 2462 n1-10 and 3420 n1-10, 2462 n1, 2462 n2, 2462 n10, and 3420 n3 were selected as excellent monokaryotic strains. These strains were considered to be superior monokaryotic strains that could be used for hybrid breeding.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.2
• /
• pp.120-127
• /
• 2015

Purpose: The aim was to investigate the effect of implant thread designs on the stress dissipation of the implant. Materials and methods: The threads evaluated in this study included the V-shaped, buttress, reverse buttress, and square-shaped threads, which were of the same size (depth). Building four different implant/bone complexes each consisting of an implant with one of the 4 different threads on its cylindrical body ($4.1mm{\times}10mm$), a force of 100 N was applied onto the top of implant abutment at $30^{\circ}$ with the implant axis. In order to simulate different osseointegration stages at the implant/bone interfaces, a nonlinear contact condition was used to simulate immature osseointegration and a bonding condition for mature osseointegration states. Results: Stress distribution pattern around the implant differed depending on the osseointegration states. Stress levels as well as the differences in the stress between the analysis models (with different threads) were higher in the case of the immature osseointegration state. Both the stress levels and the differences between analysis models became lower at the completely osseointegrated state. Stress dissipation characteristics of the V-shape thread was in the middle of the four threads in both the immature and mature states of osseointegration. These results indicated that implant thread design may have biomechanical impact on the implant bed bone until the osseointegration process has been finished. Conclusion: The stress dissipation characteristics of V-shape thread was in the middle of the four threads in both the immature and mature states of osseointegration.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.1
• /
• pp.31-48
• /
• 2019

The artificial ground freezing (AGF) method is a groundwater cutoff and/or ground reinforcement method suitable for constructing underground structures in soft ground and urban areas. The AGF method conducts a freezing process by employing a refrigerant circulating through a set of embedded freezing pipes to form frozen walls serving as excavation supports and/or cutoff walls. However, thermal expansion of the pore water during freezing may cause excessive deformation of the ground. On the other hand, as the frozen soil is thawed after completion of the construction, mechanical characteristics of the thawed soil are changed due to the plastic deformation of the ground and the rearrangement of soil fabric. This paper performed a field experiment to evaluate the freezing rate of marine clay in the application of the AGF method. The field experiment was carried out by circulating liquid nitrogen, which is a cryogenic refrigerant, through one freezing pipe installed at a depth of 3.2 m in the ground. Also, a piezo-cone penetration test (CPTu) and a lateral load test (LLT) were performed on the marine clay before and after application of the AGF method to evaluate a change in strength and stiffness of it, which was induced by freezing-thawing. The experimental results indicate that about 11.9 tons of liquid nitrogen were consumed for 3.5 days to form a cylindrical frozen body with a volume of about $2.12m^3$. In addition, the strength and stiffness of the ground were reduced by 48.5% and 22.7%, respectively, after a freezing-thawing cycle.

• Korean Journal of Environment and Ecology
• /
• v.37 no.1
• /
• pp.86-93
• /
• 2023

This study investigated the ecological characteristics of Odontobutis interrupta at the Geumdang Stream from January to December 2021. The riverbed structure of the species habitat was rich in sand and mud. The water was deep, ranging from 21 to 124 cm, with an average of 48 cm. The stream velocity was slow at 0.24 (0.08-0.36) m/sec. The ratio of females to males was 1:0.98, and the total length of collected individuals ranged from 23 mm to 162 mm. The age according to the total length-frequency distribution as of May indicated that the group with a total length of 23-59 mm was one year old, the group with 60-99 mm was two years old, the group with 100-139 mm was three years old, and the group with 140-162 mm was four years old. As a secondary gender characteristic, the females genital papilla had a cylindrical shape, a hollow inside of the tip, and a longer diameter than males. The males had a cone shape with a pointed end. Sexually mature males had the nuptial color, with a black abdomen and whole body. Some females with a length ranging from 60 to 69 mm and all females 70 mm longer were sexually mature. Some males with a length ranging from 70 to 79 mm and all males 80 mm longer were sexually mature. The spawning season was from May to July, and the water temperature was between 19.6℃ to 29℃ during that period. The prosperous spawning season was June (26℃). The average number of eggs in the ovaries was 2,473 (883-4,955) per matured female, and the matured eggs were yellowish and spherical with a mean diameter of 1.42 (1.20-0.54) mm. The correlation between total length and weight was BW=0.0000006TL^3.21 with the constant a as 0.0000006 and parameter b as 3.21. The condition factor (K) was 1.67 (1.18-2.43) on average, and the slope was 0.116.

• Korean Journal of Environment and Ecology
• /
• v.38 no.2
• /
• pp.148-155
• /
• 2024

This study investigated the ecological characteristics of Odontobutis platycephala at Jaho stream from January to December 2022. The riverbed structure of the species' habitat was rich in cobble and pebble. The water was deep, ranging from 22 to 153 cm, with an average of 64 cm, and the stream velocity was rapid at 0.89 (0.42-1.46) m/sec. The ratio of females to males was 1:1.02, and the total length of collected individuals ranged from 38 to 156 mm. The age according to the total length frequency distribution as of May indicated that the group with a total length of 38-69 mm was one year old, the group with 60-99 mm was two years old, the group with 100-139 mm was three years old, and the group 140-156 mm was four years or older. As a secondary gender characteristic, the genital papilla was cylindrical in females and cone-shaped with a pointed tip in males. Some females with a length ranging from 60 to 69 mm and all females 70 mm or longer were sexually mature. Some males with a length ranging from 70 to 79 mm and all males 80 mm or longer were sexually mature. The spawning season was from May to July, and the water temperature was between 17 ℃ and 28 ℃ during that period. The prosperous spawning season was June (24 ℃). The average number of eggs in the ovaries was 988 (284-2,722) per mature female, and the mature eggs were yellowish and spherical with a mean diameter of 1.46 (1.19-1.71) mm. The correlation between total length and body weight is BW=0.00000006TL^3.12 with the constant a as 0.00000006 and the parameter b as 3.12. The mean condition factor (K) was 1.44 (0.96-2.26), and the slope was negative at -0.0007