• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.351-351
• /
• 2006

The possible interactions between cyclodextrins and biodegradable polyesters were investigated. The hydrophobicity of cyclodextrin could be varied with the methyl substitution of host CD, and the possibility of IC formation and the types of interaction between respective CDs and polyesters were subsequently changed. Further, the effect of cyclodextrins on the morphological change of biodegradable polymer was shown to depend on the degree of IC formation between cyclodextrin and biodegradable polymer as well as on the type of interaction between respective CDs and polyesters. That is, the enhancement and/or the restriction of the crystallization of P(3HB) were observed by the incorporation of various kind of cyclodextrins with different cavity size and hydrophobicity.

• Journal of Pharmaceutical Investigation
• /
• v.17 no.2
• /
• pp.75-78
• /
• 1987

The release rate of heparin from monolithic devices composed of raffinose, ${\beta}-cyclodextrin$, polyethylene oxide (Mw 20,000, PEO), and hydrophobic polyether urethane (biomer) was investigated. Water soluble raffinose, ${\beta}-cyclodextrin$, and PEO blended into the biomer provided a controlled release of heparin. The release rate of heparin could be controlled by the content of raffinose, ${\beta}-cyclodextrin$, and PEO in the devices. The mechanism of release rate increased by the raffinose, ${\beta}-cyclodextrin$, and PEO may result from the formation of channels and pores in the biomer matrices following the swelling and the change in the physical structure of polymer net work. Hydrophobic polyurethane containing raffinose, ${\beta}-cyclodextrin$, and PEO can provide a hydrophilic antithrombogenic material for prolonged release of heparin.

• Macromolecular Research
• /
• v.14 no.4
• /
• pp.443-448
• /
• 2006

A novel ${\beta}$-cyclodextrin derivative (CCD-C) was synthesized with chitosan and carboxymethyl-${\beta}$-cyclodextrin. Its structure was characterized by elemental analysis, infrared spectra analysis, and X-ray diffraction analysis. The adsorption properties for guanosine 5'-monophosphate, cytidine 5'-monophosphate and uridine 5'-monophosphate were studied. Experimental results demonstrated that CCD-C had higher adsorption capability for guanosine 5'-monophosphate, and that the adsorption capacity for guanosine 5'-monophosphate was 74.20mg/g. The adsorption capacity was greatly influenced by pH, time and temperature. The introduction of chitosan enhanced the adsorption ability and adsorption selectivity of ${\beta}$-cyclodextrin for guanosine 5'-monophosphate. This novel derivative of chitosan is expected to have wide applications in the separation, concentration and analysis of nucleotides in biological samples.

• Polymer(Korea)
• /
• v.39 no.2
• /
• pp.261-267
• /
• 2015

The inclusion complexes (ICs) between polylactic acid (PLA) and ${\beta}$-cyclodextrin (CD) were prepared by co-precipitation method in this work. The orthogonal experiments were designed to investigate the influence of different factors on the formation of inclusion complexes. The results suggested that the optimum scheme of inclusion compounds could be obtained when the feeding ratio of CD to PLA (wt%) was 20:1, stirring speed was 6 kr/min and the stirring time was 30 min. The structures and properties of the inclusion complexes were characterized by $^1H$ NMR, FTIR, DSC, FT-Raman, XRD and TGA. The DSC results demonstrated that the crystallization behavior of the inclusion complexes nearly disappeared. It was found that ${\beta}$-CD-PLA inclusion complex had a better thermal stability compared with the neat PLA. The model of the inclusion complexes was proposed on the basis of XRD, $^1H$ NMR and DSC results.

• Polymer(Korea)
• /
• v.38 no.3
• /
• pp.338-350
• /
• 2014

Cellulose acetate (CA) fiber mats containing inclusion complexes of asiaticoside (AC) in 2-hydroxypropyl-${\beta}$-cyclodextrin ($HP{\beta}CD$) for potential usage as wound dressings were developed. The AC/$HP{\beta}CD$ complex-loaded CA fibers at various $HP{\beta}CD$ to AC molar ratios of 0.5, 1, and 2 were prepared in 90:10 v/v mixture of 80% (v/v) acetic acid and N,N-dimethylacetamide (DMAc) via electrospinning. The maximum released amounts of AC depended on the $HP{\beta}CD$ content and were much greater than those released from the AC-loaded CA fiber mat. In the in vitro study, indirect cytotoxic evaluation with human dermal fibroblasts (HDFa) showed that these materials released no substances in the levels that were harmful to the cells and the cells appeared to attach and proliferate well on these substrates. However, only the CA fiber mats containing AC/$HP{\beta}CD$ complexes at the $HP{\beta}CD$ to AC molar ratio of 0.5 was effective in upregulating the production of collagen of the cultured cells.

• Macromolecular Research
• /
• v.14 no.4
• /
• pp.449-455
• /
• 2006

Ionic cluster mimic, polymer electrolyte membranes were prepared using polymer composites of crosslinked poly(vinyl alcohol) (PVA) with sulfated-${\beta}$-cyclodextrins (${\beta}-CDSO_3H$) or phosphated-${\beta}$-cyclodextrins (${\beta}-CDPO(OH)_2$). When Nafion, developed for a fuel cell using low temperature, polymer electrolyte membranes, is used in a direct methanol fuel cell, it has a methanol crossover problem. The ionic inverted micellar structure formed by micro-segregation in Nafion, known as ionic cluster, is distorted in methanol aqueous solution, resulting in the significant transport of methanol through the membrane. While the ionic structure formed by the ionic sites in either ${\beta}-CDSO_3H$ or ${\beta}-CDPO(OH)_2$ in this composite membrane is maintained in methanol solution, it is expected to reduce methanol transport. Proton conductivity was found to increase in PVA membranes upon addition of ionized cyclodextrins. Methanol permeability through the PVA composite membrane containing cyclodextrins was lower than that of Nafion. It is thus concluded that the structure and fixation of ionic clusters are significant barriers to methanol crossover in direct methanol fuel cells.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.11
• /
• pp.2759-2761
• /
• 2009

• Applied Chemistry for Engineering
• /
• v.31 no.1
• /
• pp.25-29
• /
• 2020

In this study, a polymer/graphene hybrid composite was prepared by a simple roll-method and a simple sensor was produced by a convenient surface engineering procedure. The sensor performance was examined and the effect of graphene content on the sensing behavior was monitored. A polymer (polydimethylsiloxane, PDMS) paste containing graphene powder was prepared by a three-roll apparatus and polymer/graphene hybrid composite was produced by a two-roll technique. The sensing medium, cyclodextrin (CD) was introduced by a convenient bio-conjugation method. The efficacy of surface modification was confirmed by FT-IR spectroscopy and the ohmic relation was observed on composite surfaces. An analyte (e.g., methyl paraben, MePRB) at a 10 nM concnetration could be detected. When the graphene loading was low, the sensor performance was relatively poor. This was attributed to the absence of graphene alignments, which were observed for the composites having a high graphene loading. This indicates that the sensor performance was influenced by physical alignments of the filler. This article can provide important information for future research on developing sensing devices.

• Membrane and Water Treatment
• /
• v.7 no.3
• /
• pp.223-240
• /
• 2016

In this study, poly(vinyl-alcohol) and water insoluble ${\beta}$-cyclodextrin polymer (${\beta}$-CDP) cross-linked with citric acid, have been used as macrocyclic carrier in the preparation of polymer inclusion membranes (PIMs) for aniline (as molecule model) extraction from aqueous media. The obtained membranes were firstly characterized by X-ray diffraction, Fourier transform infrared and water swelling test. The transport of aniline was studied in a two-compartment transport cell under various experimental conditions, such as carrier content in the membranes, stirring rate and initial aniline concentration. The kinetic study was performed and the kinetic parameters were calculated as rate constant (k), permeability coefficient (P) and flux (J). These first results demonstrated the utility of such polymeric membranes for environmental decontamination of toxic organic molecules like aniline. Predictive modeling of transport flux through these materials was then studied using design of experiments; the design chosen was a two level full factorial design $2^k$. An empirical correlation between aniline transport flux and independent variables (Poly ${\beta}$-CD membrane content, agitation speed and initial aniline concentration) was successfully obtained. Statistical analysis showed that initial aniline concentration of the solution was the most important parameter in the study domain. The model revealed the existence of a strong interaction between the Poly ${\beta}$-CD membrane content and the stirring speed of the source solution. The good agreement between the model and the experimental transport data confirms the model's validity.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.306-306
• /
• 2006

We immobilized and patterned PDA vesicles on solid substrate using micro arrayer, which have moieties to react with chemical and biological materials. Immobilized vesicle system was developed since it possesses many advantages in multiple screening, durable stability, and higher sensitivity. We applied polydiacetylene supramolecules to chemical and biological sensors for detection of ${\alpha}-cyclodextrin$ and E.coli cell selectively. This detection method could be applied as DNA chip, protein chip, and cell chip for multiple screening as well as chemical sensor by modifying the functional groups of diacetylene monomer.