• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.353.2-353.2
• /
• 2016

We studied electrochemical detection of Botulinum neurotoxin, Vaccinia virus, and Streptococcus Pneumoniae based on nanogap device. Target bio substances were employed as representative targets of protein, virus, and bacteria, respectively. Redox current generated by ferri/ferrocyanide as an electroactive probe was enhanced according to gap distance which was controlled by surface-catalyzed chemical deposition. We found that enhanced electrochemical signal leads more sensitive signal changes according to selective interaction of target and its complementary elements on the electrode or gap area. In case of Botulinum neurotoxin, the redox signal showed a time-dependent increase due to cleavage of the immobilized peptide which blocked redox cycling. Redox cycling was also hindered by Vaccinia virus and Streptococcus Pneumoniae which were selectively immobilized in the gap area.

• Journal of Internet Computing and Services
• /
• v.13 no.3
• /
• pp.23-30
• /
• 2012

In order to show the gap between theory and practice, this paper first gives some experimental results for theoretical and real neighbor sets on a test-bed sensor network. The results prove that existing management protocols (e.g., duty-cycling, routing or aggregation) based on the theoretical communication radius cannot achieve their original goal, efficiency. In this paper, we present a practical duty-cycling mechanism based on the real neighbor set, allowing for energy-efficiency. It also guarantees to suppress duplicated transmissions of sensing values with similarity within a specific threshold in each zone (i.e., a portion of intended divided network). Simulation results performed with a set of real sensor data show that our mechanism increases the network life time while guaranteeing the transmission of necessary sensing values.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.5
• /
• pp.35-43
• /
• 2008

In this study we confirmed for the cardiopulmonary ability improvement of the cycling exercise which uses a target heart beat. Consequently, we looked the resting systolic blood pressure down at 2.98% and THBI(Total Heart Beat Index) also decrements at 7.59%. But, increase of $VO_2$ max and PTT(Pulse Transit Time)were each point 24.60% and 4.92%. Increase of $VO_2$ max showed the growth of stroke volume by myocardial development. The increase of a stroke volume induces the decrease of Heart rate. The blood pressure was reduced also though the blood of many quantity was supplied at the artery. The reason is the phenomenon to be due to by an elasticity increase of the artery. We found out it through the decrease of PTT. So the cycling exercise to use consequently the target heart beat will become big aid at the health care.

• Journal of Ginseng Research
• /
• v.43 no.4
• /
• pp.580-588
• /
• 2019

Background: Ginsenoside Rg1 has been shown to clear senescence-associated beta-galactosidase (SA-${\beta}$-gal) in cultured cells. It remains unknown whether Rg1 can influence SA-${\beta}$-gal in exercising human skeletal muscle. Methods: To examine SA-${\beta}$-gal change, 12 young men (age $21{\pm}0.2years$) were enrolled in a randomized double-blind placebo controlled crossover study, under two occasions: placebo (PLA) and Rg1 (5 mg) supplementations 1 h prior to a high-intensity cycling (70% $VO_{2max}$). Muscle samples were collected by multiple biopsies before and after cycling exercise (0 h and 3 h). To avoid potential effect of muscle biopsy on performance assessment, cycling time to exhaustion test (80% $VO_{2max}$) was conducted on another 12 participants (age $23{\pm}0.5years$) with the same experimental design. Results: No changes of SA-${\beta}$-gal were observed after cycling in the PLA trial. On the contrary, nine of the 12 participants showed complete elimination of SA-${\beta}$-gal in exercised muscle after cycling in the Rg1 trial (p < 0.05). Increases in apoptotic DNA fragmentation (PLA: +87% vs. Rg1: +133%, p < 0.05) and $CD68^+$ (PLA:+78% vs. Rg1:+121%, p = 0.17) occurred immediately after cycling in both trials. During the 3-h recovery, reverses in apoptotic nuclei content (PLA:+5% vs. Rg1 -32%, p < 0.01) and increases in inducible nitrate oxide synthase and interleukin 6 mRNA levels of exercised muscle were observed only in the Rg1 trial (p < 0.01). Conclusion: Rg1 supplementation effectively eliminates senescent cells in exercising human skeletal muscle and improves high-intensity endurance performance.

• Transactions on Electrical and Electronic Materials
• /
• v.9 no.4
• /
• pp.143-146
• /
• 2008

In this study the thermal impact characteristics by forest fire are extensively investigated using temperature controlled ovens. The test conditions for thermal impact damage are simulated according to the characteristics of natural forest fire. The test pieces are suspension porcelain insulators made by KRI in 2005 for transmission lines. In the thermal impact cycle tests with $300\;^{\circ}C$ thermal impact gradient (-70 to $230\;^{\circ}C$), cycling in 10 minute periods, no critical failures occurred in the test samples even with long cycle times. But in tests with thermal impact gradient from room temperature to $200-600\;^{\circ}C$, cycling in 10 to 30 minute periods, there were critical failures of the porcelain insulators according to the thermal impact gradient and quenching method. In the case of thermal impact by forest fire, it was found of that duration time is more important than the cycling time, and the initiation temperature of porcelain insulator failures is about $300\;^{\circ}C$, in the case of water quenching, many cracks and fracture of the porcelain occurred. It was found that the thermal impact failure is closely related to the displacement in the cement by thermal stress as confirmed by simulation. It was estimated that the initiation displacement by the thermal impact of $300\;^{\circ}C$ is about 0.1 %. Above 1% displacement, it is expected that the most porcelain insulators would fail.

• Applied Chemistry for Engineering
• /
• v.23 no.5
• /
• pp.445-449
• /
• 2012

The activation process of the membrane-electrode assembly (MEA) is important for the mass production of the polymer electrolyte membrane fuel cell. The conventional activation process for the MEA requires excessive time and hydrogen gas and it might become the barrier for the commercialization of the fuel cell. The conventional activation process is based on hydrolysis of ion conducting membrane. In the study, we suggest the cyclic voltammetry (CV) technique as an on-line activation process and the CV activation process consists of two steps : 1) the humidification of the polymer electrolyte membrane and the electrode with 100% RH humidified nitrogen ($N_{2}$) gas, and 2) the removal step of the oxide layer on the surface of the Pt catalyst with CV cycling. The cycling reduces the activation time of the MEA by 2.5 h and use of hydrogen gas by 1/4.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1436-1441
• /
• 2006

Each type of optical sheets in a LCD module experiences a characteristic behavior for thermal loading and unloading. During thermal cycling, a polymeric behavior is reversible and recyclable, depending on a material stiffness critically affected by temperature and time. Some critical issues on temperature- and time-dependent themomechanical deformation of the polymeric sheet are addressed by finite-element thermal results, followed by structural simulation results in this study.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.6
• /
• pp.677-684
• /
• 2004

Plastic and creep deformations of solder joints during thermal cycling are the main factors of misalignments and power losses in optical telecommunication components. Furthermore, the increased mismatch between solder Joint-bonded areas may cause severe failure in the components. Darveaux's creep model was implemented into a finite element program (ABAQUS) to simulate creep response of solder. Based on the finite element results, thermal fatigue reliability was predicted by using various fatigue life prediction models. Also, the effects of ramp conditions, dwelling time, and solder joint-embedding materials on the reliability were investigated under the thermal cycling conditions of the Telcordia schedule (-40∼75$^{\circ}C$).

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.62.2-62.2
• /
• 2011

To guarantee 20-25 years to the lifetime of the PV modules without failure, reliability test of the module is very important. Field-aged test of the outdoor environment is required. However, due to time constraints, accelerated testing is required to predict the lifetime of PV modules and find causes of failure. Failure is caused by many complex phenomena. In this study, we experimented two accelerated tests about corrosion and fatigue, respectively. First, temperature cycling test for fatigue were tested and Coffin-Manson equation was analyzed. Second, damp heat test for corrosion were tested and Eyring equation were analyzed. Finally, using two-mode failure model, we suggest a new lifetime model that analyze the phenomenon by combining two kinds of data.

• Industrial Engineering and Management Systems
• /
• v.9 no.1
• /
• pp.28-40
• /
• 2010

One of the most important objectives of the schedules in a container terminal is to minimize the ship operation time, which consists of discharging and loading operation times. Recently, dual cycling techniques have been used for improving terminal operations, especially for reducing the total empty trips of handling equipment. The main focus of this study is to reduce the empty trip times of yard trucks with minimum delays for ship operations. A heuristic algorithm, modified from a previous algorithm, is proposed to solve this problem. A simulation study is conducted to evaluate the effect of different types of discharging and loading schedules and different locating methods for discharging containers in terms of the performance of the system, including the percentage of the dual cycle operations of yard trucks.