• 전기화학회지
• /
• 제5권3호
• /
• pp.159-163
• /
• 2002

리튬 이차 전지에서 음극으로 리튬 금속은 매우 높은 에너지 밀도를 가치고 있으나 짧은 충방전 수명, 안정성 결여 및 고율 충방전특성 불량 등의 단점을 가지고 있다. 이는 리튬큼속과 전해액의 반응에 의해 표면보호막의 형성, 침상리튬 생성, 음극 표면적의 증가로 인한 리튬석출의 불균일성에 기인되어 싸이클 효율과 수명이 저하된다. 본 연구는 전해 액에 첨가제 benzene, toluene, tetramethylethylenediamine를 넣어 줌으로 전지 테스트에서 싸이클 효율과 수명이 향상됨을 확인 할 수 있었다. Impedance 측정결과 필름 저항의 감소와 전하전이 저항의 증가로 전해액의 첨가제가 리튬 표면에 새로운 층을 형성시킴으로서 이런 구성물들이 리튬과 전해액과의 반응성을 억제시킴과 동시에 리튬이 특이적으로 표면에 흡착되어 리튬의 석출 형태가 향상된 것으로 사료된다.

• Journal of Radiation Protection and Research
• /
• 제28권1호
• /
• pp.1-8
• /
• 2003

원자력 발전소에 대한 주기적 안전성 평가에서는 발전소 주변 환경감시 프로그램 적절성의 확보를 요구한다. 이를 위하여 고리 원자력발전소 주변에 대하여 과거에 측정된 삼중수소의 환경방사능 자료를 분석하고, 새로이 시료를 채취하여 농도를 측정하였다. 분석결과 고리 원자력 발전소 주변에서의 삼중수소 농도가 국내 자연 환경 방사능 농도와 유사하였다 국내 삼중수소 환경방사능 변화를 모델링을 통하여 추정하였다. 이 모델링에서는 NCRP 62에서 권고한 7격실 글로벌 삼중수소 순환 모델 중 지구 전체에 대한 것과 북반구에 대한 것을 비교하였다. 이들 모델식에 대한 수치해는 AMBER 프로그램을 이용하여 구하였으며, 대기 중으로 방출되는 삼중수소의 선원항으로 4가지 경우를 고려하였다. 계산결과, 지표수의 삼중수소 농도가 해수나 지하수의 농도보다 놀게 나타났고, 우주선에 의한 삼중수소 발생이 가장 중요한 삼중수소 발생원 이었으며, 핵실험에 의해 발생된 삼중수소는 많이 감소하였다.

• Journal of Electrochemical Science and Technology
• /
• 제10권2호
• /
• pp.196-205
• /
• 2019

Ni-rich layered oxides $Li(Ni_xCo_yMn_z)O_2$ (x + y + z = 1) have been extensively studied in recent times owing to their high capacity and low cost and can possibly replace $LiCoO_2$ in the near future. However, these layered oxides suffer from problems related to the capacity fading, thermal stability, and safety at high voltages. In this study, we use surface coating as a strategy to improve the thermal stability at higher voltages. The uniform and conformal $Al_2O_3$ coating on prefabricated electrodes using atomic layer deposition significantly prevented surface degradation over prolonged cycling. Initial capacity of 190, 199, 188 and $166mAh\;g^{-1}$ is obtained for pristine, 2, 5 and 10 cycles of ALD coated samples at 0.2C and maintains 145, 158, 151 and $130mAh\;g^{-1}$ for high current rate of 2C in room temperature. The two-cycle $Al_2O_3$ modified cathode retained 75% of its capacity after 500 cycles at 5C with 0.05% capacity decay per cycle, compared with 46.5% retention for a pristine electrode, at an elevated temperature. Despite the insulating nature of the $Al_2O_3$ coating, a thin layer is sufficient to improve the capacity retention at a high temperature. The $Al_2O_3$ coating can prevent the detrimental surface reactions at a high temperature. Thus, the morphology of the active material is well-maintained even after extensive cycling, whereas the bare electrode undergoes severe degradation.

• 청정기술
• /
• 제28권2호
• /
• pp.97-102
• /
• 2022

Lithium sulfur (Li-S) batteries have attracted considerable attention as a promising candidate for next-generation power sources due to their high theoretical energy density, low cost, and eco-friendliness. However, the poor electrical conductivity of sulfur and its insoluble discharging products (Li₂S₂/Li₂S), large volume changes, severe self-discharge, and dissolution of lithium polysulfide intermediates result in rapid capacity fading, low Coulombic efficiency, and safety risks, hindering Li-S battery commercial development. In this study, a three-dimensionally (3D) connected hierarchical porous carbon framework (HPCF) derived from waste sunflower seed shells was synthesized as a sulfur host for Li-S batteries via a chemical activation method. The natural 3D connected structure of the HPCF, originating from the raw material, can effectively enhance the conductivity and accessibility of the electrolyte, accelerating the Li⁺/electron transfer. Additionally, the generated micropores of the HPCF, originated from the chemical activation process, can prevent polysulfide dissolution due to the limited space, thereby improving the electrochemical performance and cycling stability. The HPCF/S cell shows a superior capacity retention of 540 mA h g^-1 after 70 cycles at 0.1 C, and an excellent cycling stability at 2 C for 700 cycles. This study provides a potential biomass-derived material for low-cost long-life Li-S batteries.

• Journal of Electrochemical Science and Technology
• /
• 제15권3호
• /
• pp.365-372
• /
• 2024

As the energy density of lithium-ion batteries (LIBs) continues to increase, various separators are being developed to with the aim of improving the safety performance. Although poly(imide) (PI)-based separators are widely used, it is difficult to control their pore size and distribution, and this may further increase the risk associated. Herein, a melamine phosphonic acid (MP)-coated PI separator that can effectively control the pore structure of the substrate is suggested as a remedy. After the MP material is embedded into the PI separator with a simple one-step casting process, it effectively clogs the large pores of the PI separator, preventing the occurrence of internal short circuits during charging. It is anticipated that the MP material can also suppress rapid thermal runaway upon cycling due to its ability to reduce the internal temperature of the LIB cell caused by the desirable endothermic behavior around 300℃. According to experiments, the MP-coated PI separator not only decreases the thermal shrinkage rate better than commercial poly(ethylene) (PE) separators but also exhibits a desirable Gurley number (109.6 s/100 cc) and electrolyte uptake rate (240%), which is unique. The proposed separator is electrochemically stable in the range 0.0-5.0 V (vs. Li/Li⁺), which is the typical working potential of conventional electrode materials. In practice, the MP-coated PI separator exhibits stable cycling performance in a graphite-LiNi_0.83Co_0.10Mn_0.07O₂ full cell without an internal short circuit (retention: 90.3%).

• 한국재료학회지
• /
• 제33권4호
• /
• pp.159-163
• /
• 2023

Zinc-ion Batteries (ZIBs) are currently considered to be effective energy storage devices for wearable electronics because of their low cost and high safety. Indeed, ZIBs show high power density and safety compared with conventional lithium ion batteries (LIBs) and exhibit high energy density in comparison with supercapacitors (SCs). However, in spite of their advantages, further current collector development is needed to enhance the electrochemical performance of ZIBs. To design the optimized current collector for high performance ZIBs, a high quality graphene film is suggested here, with improved electrical conductivity by controlling the defects in the graphene film. The graphene film showed improved electrical conductivity and good electron transfer between the current collector and active material, which led to a high specific capacity of 346.3 mAh g^-1 at a current density of 100 mA g^-1, a high-rate performance with 116.3 mAh g^-1 at a current density of 2,000 mA g^-1, and good cycling stability (68.0 % after 100 cycles at a current density of 1,000 mA g^-1). The improved electrochemical performance is firmly because of the defects-controlled graphene film, leading to improved electrical conductivity and thus more efficient electron transfer between the current collector and active material.

• Corrosion Science and Technology
• /
• 제22권6호
• /
• pp.466-477
• /
• 2023

The increasing demand for high-performance energy storage systems has highlighted the limitations of conventional Li-ion batteries (LIBs), particularly regarding safety and energy density. All-solid-state batteries (ASSBs) have emerged as a promising next-generation energy storage system, offering the potential to address these issues. By employing nonflammable solid electrolytes and utilizing high-capacity electrode materials, ASSBs have demonstrated improved safety and energy density. Automotive and energy storage industries, in particular, have recognized the significance of advancing ASSB technology. Although the use of Li metal as ASSB anode is promising due to its high theoretical capacity and the expectation that Li dendrites will not form in solid electrolytes, persistent problems with Li dendrite formation during cycling remain. Therefore, the exploration of novel high-performance anode materials for ASSBs is highly important. Recent research has focused extensively on alloy-based anodes for ASSBs, owing to their advantages of no dendrite formation and high-energy density. This study provides a comprehensive review of the latest advancements and challenges associated with alloy-based anodes for ASSBs.

• 한국가스학회지
• /
• 제13권4호
• /
• pp.33-39
• /
• 2009

이 연구는 천연가스버스에 장착된 용기가 국부화염에 집중적으로 노출되었을 때나 외기온도가 높은 여름철 충전과정에서 과 충전되었을 때 용기파열을 방지하기 위한 방안으로 압력방출장치의 성능을 확인하고 확대 적용할 목적으로 의도되었다. 열사이클링 실험결과, $-40^{\circ}C{\sim}82^{\circ}C$ 인증기준에서 가스누출요건을 모두 충족하였지만 $-45^{\circ}C{\sim}135^{\circ}C$의 가속조건에서는 3개사 시험편중 2개사 시험편의 오링이 손상되었다. 또한 온도감응형 PRD의 평균작동시간은 액체봉입식이 1분 39초가 걸렸고, 가용합금식이 2분 31초가 소요되어 액체봉입식이 가용합금식보다 약 1분 정도 빠름을 나타내었다. 또한 압력감응형 PRD의 작동압력은 가속조건에서 약 32.1 MPa을 나타내었고 인증기준에서의 압력감응형 PRD의 파열압력은 $30.7{\sim}32.1\;MPa$를 기록하였다. 이상의 실험을 통해서 압력방출장치의 성능은 온도감응형 PRD의 경우, 액체봉입식이 가용합금식보다 화염에 더 효과적이며, 압력 감응형 PRD의 파열압력은 외부온도 및 반복가압이 파열판의 작동압력에 크게 영향을 미치지 않음을 확인할 수 있었다.

• Journal of Electrochemical Science and Technology
• /
• 제10권2호
• /
• pp.250-255
• /
• 2019

Poly(ethylene oxide) (PEO)-based solid polymer electrolytes (SPEs) show promise for improving the lithium ion battery safety. However, due to oxidation of the PEO group and corrosion of the Al current collector, PEO-based SPEs have not previously been effective for use in $LiCoO_2$ (LCO) cathode materials at room temperature. In this paper, a semi-interpenetrating polymer network (semi-IPN) PEO-based SPE was applied to examine the performance of a LCO/SPE/Li metal cell at different voltage ranges. The results indicate that the SPE can be applied to LCO-based lithium polymer batteries with high electrochemical performance. By using a carbon-coated aluminum current collector, the Al corrosion was mostly suppressed during cycling, resulting in improvement of the cell cycle stability.

• 공업화학
• /
• 제34권4호
• /
• pp.365-382
• /
• 2023

A lithium metal anode with high energy density has the potential to revolutionize the field of energy storage systems (ESS) and electric vehicles (EVs) that utilize rechargeable lithium-based batteries. However, the formation of lithium dendrites during cycling reduces the performance of the battery while posing a significant safety risk. In this review, we discuss various strategies for achieving dendrite-free lithium metal anodes, including electrode surface modification, the use of electrolyte additives, and the implementation of protective layers. We analyze the advantages and limitations of each strategy, and provide a critical evaluation of the current state of the art. We also highlight the challenges and opportunities for further research and development in this field. This review aims to provide a comprehensive overview of the different approaches to achieving dendrite-free lithium metal anodes, and to guide future research toward the development of safer and more efficient lithium metal anodes.