• 대한약리학회지
• /
• 제30권3호
• /
• pp.343-349
• /
• 1994

정신병치료제들을 장기투여하여 치료를 시도하였을 때에 생기는 여러 부작용은 그 정도 또한 매우 심각하기 때문에 그들의 치료효과와 함께 야기되는 부작용들을 따로 생각할 수가 없게 되었다. 특히 정신병치료는 그 자체에 대한 병인적 원인을 정확히 알 수 없기에 증상에 따른 대중요법이 일괄적으로 사용되므로, 이러한 현재의 치료방법으로는 부작용들이 더 치명적이 될 수 있기 때문에 일차적으로 이들의 공통적약리작용기전들을 연구하는 것은 매우 필요하다. 최근 NO(Nitric oxide)에 대한 많은 연구들에 의하면, 이들이 중추신경계에서 중요한 second messenger 또는 mediator로 신경활동에 영향을 나타내는 것으로 보고되고 있다. 그러므로 저자들은 먼저 이들 약물들과 NO와의 관계를 연구하고자, 중요한 몇종의 정신병치료제들을 택하여 NO생성에 어떤 영향을 미치는 가를 검색하여 다음과 같은 일차 결과를 얻었다 1. 정신병치료제 수종(chlorpromazine, trifluoperazine promazine, pimozide, clozapine, chlorprothixene, haloperidol)을 택하여 쥐의 소내에서 $[^3H]L-arginine$으로부터 $[^3H]L-citrulline$의 생성양을 측정하여 calmodulin antagonist(calmidazolium)와 비교하였다. 2. 이들을 N1E-115 cell에 투여하여 $[^3H]cyclic$ GMP양을 측정하고 그 결과를 calmida-zolium 과 비교하였다. 3. 이들 약물들은 citrulline과 cyclic GMP 모두의 생성양을 의의있게 억제하였으며 그 기전은 calmidazolium과 매우 유사하였다. 위의 일차적 검색결과에 의하면, 정신병치료약물들의 약리작용 기전중에 일부는 중추신경계내의 NO생성 및 cyclic GMP생성에 영향을 나타내는 것으로 사료되며, 이에는 calcium ion이 상당히 중요한 역할을 하는데, 특히 소뇌에서의 NO생성의 감소는 이들 약물들의 치명적 부작용인 tardive dyskinesia와 매우 깊은 관련을 추측할 수 있다. 그러나, 더 많은 약물들의 검색으로 일관적인 기본 결과가 필요 되고 또 각개 약물의 특정적 기전이 연구되기 위하여 현재 실험중이다.

• 한국결정성장학회지
• /
• 제24권4호
• /
• pp.151-157
• /
• 2014

The degradation mechanisms of thermal barrier coatings (TBCs) were investigated in different thermal fatigue condition in terms of microstructural analyses. The isothermal and cyclic oxidation tests were conducted to atmospheric plasma sprayed-TBCs on NIMONIC 263 substrates. The delamination occurred by the oxide layer formation at the interface, the Ni/Cr-based oxide was formed after Al-based oxide layer grew up to ${\sim}10{\mu}m$ in the isothermal condition. In the cyclic oxidation with dwell time, the failure occurred earlier (500 hr) than in the isothermal oxidation (900 hr) at same temperature. The thickness of Al-based oxide layer of the delaminated specimen in the cyclic condition was ${\sim}4{\mu}m$ and the interfacial cracks were observed. The acoustic emission method revealed that the cracks generated during the cooling step. It was considered that the specimens were prevented from the formation of the Al-based oxide by cooling treatment, and the degradation mode in the cyclic test was dominantly interfacial cracking by the difference of thermal expansion coefficients of the coating layers.

• 한국주조공학회지
• /
• 제32권1호
• /
• pp.32-37
• /
• 2012

In this study, microstructural evaluation was carried out on secondary hardening type ultrahigh strength steel, Fe-Co-Ni composition. This paper as a first part of whole research presented the microstructural behavior by cyclic heat treatment. The cyclic heat treatment method includes normalizing, stress relieving, solution treatment and aging. Especially, solution treatments performed triple times to get maximized solution hardening. Phase transformation and microstructure were observed by using optical microscope (OM), Electron back-scattered diffraction (EBSD) and X-ray stress analyzer. During the triple solution treatment, size of grain boundary was dramatically decreased by generating a packet from the martensite transformation of residual austenite in the inner part of grain, whereas the hardness increase was not significant.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제18권4호
• /
• pp.224-229
• /
• 2015

Cyclic vomiting syndrome (CVS) is a functional disorder characterized by stereotypical episodes of intense vomiting separated by weeks to months. Although it can occur at any age, the most common age at presentation is 3-7 years. There is no gender predominance. The precise pathophysiology of CVS is not known but a strong association with migraine headaches, in the patient as well as the mother indicates that it may represent a mitochondriopathy. Studies have also suggested the role of an underlying autonomic neuropathy involving the sympathetic nervous system in its pathogenesis. CVS has known triggers in many individuals and avoiding these triggers can help prevent the onset of the episodes. It typically presents in four phases: a prodrome, vomiting phase, recovery phase and an asymptomatic phase until the next episode. Complications such as dehydration and hematemesis from Mallory Wise tear of the esophageal mucosa may occur in more severe cases. Blood and urine tests and abdominal imaging may be indicated depending upon the severity of symptoms. Brain magnetic resonance imaging and upper gastrointestinal endoscopy may also be indicated in certain circumstances. Management of an episode after it has started ('abortive treatment') includes keeping the patient in a dark and quiet room, intravenous hydration, ondansetron, sumatriptan, clonidine, and benzodiazepines. Prophylactic treatment includes cyproheptadine, propranolol and amitriptyline. No mortality has been reported as a direct result of CVS and many children outgrow it over time. A subset may develop other functional disorders like irritable bowel syndrome and migraine headaches.

• Corrosion Science and Technology
• /
• 제20권5호
• /
• pp.266-280
• /
• 2021

Since 2020, the International Maritime Organization (IMO) has updated regulations on the sulfur content to be less than 0.5% in exhaust gas emitted from ships. Accordingly, the exhaust gas post-treatment device for ships, which is SOx/NOx reduction technology, was introduced. However, the exhaust gas post-treatment device is suffering corrosion because of the harsh corrosive environment formed by sulfate and chlorine oxide through the desulfurization process. In this investigation, cyclic potentiodynamic polarization (CPDP) experiment for UNS S31603 and UNS N08367 was performed in a green death solution that simulates the environment of a desulfurization device. The corrosion rate of UNS S31603 at the highest temperature was about 3 times higher than that of UNS N83067. Also, electron microscope scan revealed corrosion type UNS N83067 presents intergranular corrosion tendency. On the other hand, UNS S31603 was observed as general corrosion. The α values of UNS N08367 at 30 ℃ and 60 ℃ were higher than those of UNS S31603, thus UNS N08367 is considered to have a higher local damage tendency. Whereas, since the α value of UNS S31603 at 90 ℃ is larger than that of UNS N08367, UNS S31603 is considered to have a higher local damage trend.

• 대한기계학회논문집A
• /
• 제35권9호
• /
• pp.1119-1129
• /
• 2011

쇼트피닝(shot-peening) 처리를 한 베어링강의 고사이클 피로거동을 연구하였다. 열처리한 베어링강(JISSUJ2) 시험편과 열처리 후 쇼트피닝 표면가공을 추가한 시험편을 사용해 회전굽힘피로시험을 수행하고 파단 된 시험편의 파면을 분석하였다. 시험편의 피로파괴는 표면 결함에서 비롯된 표면 파괴와, 내부의 비금속개 재물에서 비롯된 내부형 파괴의 두 종류로 발생하였다. 내부 파괴의 경우 비금속 개재물 주변에 어안(fisheye) 모양의 파괴양식이 관찰되었다. 개재물은 표면으로부터의 깊이와 형상에 따라 피로 수명에 큰 영향을 주었다. 쇼트피닝 가공을 한 베어링강은 저사이클 하중영역 및 고사이클 하중영역에서 모두 피로수명이 향상되었으며, 하중이 작아질수록 피로수명의 개선은 더욱 커졌다. 또한 2 모수 와이블(Weibull) 분포를 이용하여 베어링강의 확률-응력-수명 (P-S-N) 곡선을 구하여 신뢰도 높은 피로수명 예측을 하였다.

• 대한치과교정학회지
• /
• 제52권6호
• /
• pp.412-419
• /
• 2022

Objective: This study evaluated the effect of cyclic pre-calcification treatment on the improvement of bioactivity and osseointegration of Ti-6Al-4V mini-screws. Methods: The experimental groups were: an untreated group (UT), an anodized and heat-treated group (AH), and an anodized treatment followed by cyclic pre-calcification treatment group (ASPH). A bioactive material with calcium phosphate was coated on the mini-screws, and its effects on bioactivity and osseointegration were evaluated in in vitro and in vivo tests of following implantation in the rat tibia. Results: As a result of immersing the ASPH group in simulated body fluid for 2 days, protrusions appearing in the initial stage of hydroxyapatite precipitation were observed. On the 3rd day, the protrusions became denser, other protrusions overlapped and grew on it, and the calcium and phosphorus concentrations increased. The removal torque values increased significantly in the following order: UT group (2.08 ± 0.67 N·cm), AH group (4.10 ± 0.72 N·cm), and ASPH group (6.58 ± 0.66 N·cm) with the ASPH group showing the highest value (p < 0.05). In the ASPH group, new bone was observed that was connected to the threads, and it was confirmed that a bony bridge connected to the adjacent bone was formed. Conclusions: In conclusion, it was found that the surface treatment method used in the ASPH group improved the bioactivity and osseointegration of Ti-6Al-4V orthodontic mini-screws.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권1호
• /
• pp.90-98
• /
• 2002

In this paper, the annealing heat treatments for the best corrosion resistant of Ti(Grade 2) were studied in a 3.5% NaCl solution by electrochemical methods. The annealing heat treatments were accomplished at 650, 700 and $750^{\circ}C$ with different time of 30min., 1hour and 2 hours in a vacuum condition. The obtained results are: 1) in the case of solution heat treated $930^{\circ}C$ for 2 hours in a vacuum and air, the corrosion potentials were -348.7 and -567. 1mV, and current densities 2.32 and $22.62\mu\textrm{A}$, respectively, 2) as increase both annealing heat treatment temperature 650, 700, $750^{\circ}C$ and time 30min., 1 hour, 2 hours, the corrosion potential were decreased, whereas corrosion current density increased, 3) in the case of cyclic polarization, the measured charges were increased as increasing solution heat treatment temperature and time, 4) on the bases of corrosion potential, current density and charge, the best annealing temperature and time were measured as $700^{\circ}C$ and 30min. for Ti(Grade 2) material.

• 열처리공학회지
• /
• 제4권3호
• /
• pp.31-38
• /
• 1991

Effect of thermal cycling on shape memory effect and stabilization of austenite was investigated in Fe-21%Mn alloy. The thermal cyclic treatment was carried out with two types, room temperature${\leftrightarrow}215^{\circ}C$ and room temperature${\leftrightarrow}260^{\circ}C$. In case of the room temperature${\leftrightarrow}215^{\circ}C$, the SME was rapidly increased up to 3 cycles and maintained nearly constant value regardless of further cycles. In case of the room temperature${\leftrightarrow}260^{\circ}C$, however, the SME was increased with increasing the thermal cycle up to 5 cycles and decreased gradually with further cycle. The variation of the ${\varepsilon}$ martensite volume pet with the thermal cycle was in good agreement with the variation of the SME. Therefore, the change of the SME due to the cyclic treatment was explained with the change of the ${\varepsilon}$ martensite content. As the thermal cycle was increased, the $M_s$ temperature was decreased, and the $A_s$ and $A_f$ temperatures were increased, respectively.

• The Korean Journal of Ceramics
• /
• 제6권3호
• /
• pp.296-299
• /
• 2000

The electrical properties of various metal phthalocyanine(MPc) thin film sensors were tested in the presence of $NO_x$ gas. Among the Phthalocyanine(Pc) thin films, lead phthalocyanine(PbPc) thin film showed the best results nd its sensitivity was over 80% at 5ppm of $NO_x$ gas. Optimal operating conditions including response time and cyclic treatment of $NO_x$ were tested and discussed.