• 한국구조물진단유지관리공학회 논문집
• /
• 제21권1호
• /
• pp.9-14
• /
• 2017

본 연구는 일반철근과 FRPH Bar를 주철근으로 한 철근 콘크리트 보부재를 대상으로 정적실험 및 반복하중 재하실험을 수행하여 에너지 소산성능 및 반복하중 저항성능을 분석하였다. 실험을 위하여 24MPa의 설계강도를 가진 콘크리트 보부재($200{\times}200{\times}2175mm$)를 제작하였으며, 4점 휨 시험을 수행하여 초기균열하중, 항복하중, 파괴하중을 측정하였다. 정적하중 재하실험을 통해 각 시험체에 대한 항복하중과 파괴강도를 측정하였는데, 항복하중은 RC보에서는 48.9kN, FRPH 보에서는 36kN으로 평가되었으며, 파괴하중은 두 시험체 모두 50kN의 강도를 보였다. 정적하중-처짐 결과에서는 FRPH 보는 RC보에 비하여 인장경화특성을 나타내는데, 이는 FRPH bar의 인장경화 특성에 기인한다. 반복하중하에서 FRPH bar를 가진 보에서는 일반 RC보와는 다르게 작은 폭의 균열이 넓게 발생하였으며, 우수한 처짐 복원력을 나타내었다. 정적 동적 에너지 비율을 이용한 에너지 소산능력에서는 RC보에서는 0.62, FRPH 보에서는 0.83으로 평가되었으며, 이를 통해 FRPH를 가진 보부재에서 효과적으로 반복하중에 대하여 저항함을 알 수 있다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1528-1537
• /
• 2005

The purpose of this study is investigated the method for estimation of the liquefaction on the reclaimed land, located in Incheon and assessed the ability of liquefaction under the condition of criteria, which is the magnitude '6.5' of seismic on the basis of the domestic seismic characteristics. Performed not only field test but the experiment as well to study how the fine content would affect into the dreging and reclaimed land and also estimated the safety factor through the empirical method and anticipated detail method based on the results. Within the reclaimed land, there are many sized soils which are almost extended from well-graded silty sand(SM) to poor-graded fine grained sand, and which have the condition, so called, the liquefaction which is easily to bring into under the circumstances within the ground. However, partly, now that the soil is mixed with silt and silty clay which include the content of fine grained dust quite a bit, the difficulties and inconveniences has been expected while trying to find the ratio of cyclic resistance, but finally Seed and Idriss method showed the most way when we estimate the safety factor on the liquefaction.

• Steel and Composite Structures
• /
• 제32권6호
• /
• pp.769-778
• /
• 2019

The specially prefabricated steel moment connections with pyramid head is one of the significant innovations in the steel structures forms to improve the installation time and simplify the construction procedure. The beams in this structure form are supported by two top and bottom angles and web double angles. Such a configuration despite its advantages increases the welding operation and filed installation time and costs. In this paper, the effect of using beams with channel and I section in three classes of seismically compact, seismically non-compact, and slender section according to width-to-thickness ratio on the behavior of the connection was investigated under monotonic and cyclic loading. Modeling was performed by ABAQUS and verified by the results of an experimental specimen. The findings indicated that using I and channel section instead of angle section reduces the amount of welding materials as well as easing the installation procedure. However, it has no significant effect on the ultimate strength and ductility of the connection. Furthermore, if the beam section is seismically compact, this form is considered as a special moment frame that has a rotation capacity up to 0.04 radians without any reduction in connection moment resistance.

• 한국지반공학회논문집
• /
• 제36권6호
• /
• pp.35-46
• /
• 2020

액상화 구성모델의 입력변수는 실내외 실험 등을 통해 지반 및 하중 조건에 적합한 값을 결정하는 것이 중요하지만, 설계 실무에서는 시험수행의 어려움 등으로 입력변수의 결정 및 해석결과의 검증이 어려웠다. 본 연구에서는 반복 직접전단시험에 대한 수치모델링을 수행하여 액상화 구성모델 중 Finn 모델과 PM4Sand 모델의 적용성을 분석하였다. 그 결과, Finn 모델은 과잉간극수압의 최대값 도달시점은 모사할 수 있었지만 항복 이후의 과잉간극수압 응답 및 응력-변형률 거동을 모사하는데 한계가 있었다. 이에 반해, PM4Sand 모델은 액상화 도달시점 및 및 액상화 이후의 응력-변형률 거동을 잘 모사할 수 있었다. 최종적으로, 설계조건에 맞는 액상화 저항전단응력비 CRR을 모사할 수 있는 액상화 모델의 입력변수 산정절차를 제안하고 PM4Sand 모델의 입력변수를 산정하는 간편식을 제안하였다.

• Composites Research
• /
• 제18권4호
• /
• pp.21-26
• /
• 2005

탄소나노튜브 및 탄소나노섬유/에폭시 복합재료의 비파괴 손상감지능 및 응력전달 메카니즘이 전기-미세기계적 실험법을 통하여 조사되었다. 전기-미세기계적 실험법은 균일한 반복하중 하에서 전기저항을 측정함으로써 탄소나노복합재료의 감지반응을 평가하는 것이다. 큰 탄소섬유 부피 분율이 있는 복합재료가 에폭시 자체나 작은 부피 분율에 비하여 매우 큰 인장강도 특성을 보여주었다. 탄소나노섬유 복합재료는 제한된 온도범위 내에서 습도 감지능을 보여주었다. 형상비가 작은 탄소나노섬유 복합재료는 많이 첨가된 부피량에 기인하여 보다 큰 겉보기 탄성계수를 보여 주었다. 열처리된 전기 방사된 PVDF 나노섬유는 증대된 결정화에 기인하여 미처리의 경우보다 큰 기계적 특성을 보여 주었으며, 그 반면에 응력 감지능은 열처리의 경우에 감소를 보여 주었다. 전기 방사된 나노섬유는 또한 응력전달 뿐만 아니라 습도 및 온도에 대한 감지능도 나타내었다. 탄소나노튜브. 탄소나노섬유 및 전기 방사된 PVDF 나노섬유는 나노복합재료의 다기능에 응용할 수 있을 것이다.

• 한국자동차공학회논문집
• /
• 제11권5호
• /
• pp.219-226
• /
• 2003

The fatigue crack growth behavior of the SA516/60 steel used for pressure vessels was examined experimentally at room temperatures $25^{\circ}C$,$-30^{\circ}C$, $-60^{\circ}C$, $-80^{\circ}C$, $-100^{\circ}C$ and $-120^{\circ}C$ with stress ratio of R=0.05, 0.1 and 0.3. fatigue crack propagation rate da/dN related with stress intensity factor range $\Delta$K was influenced by stress ratio in stable than fatigue crack growth (Region II) with an increase in $\Delta$K. The resistance of fatigue crack growth at low temperature is higher compared with that at room temperature, which is attributed to the extent of plasticity-induced by compressive residual stress according to the cyclic loads. Fractographic examinations reveal that the differences of the fatigue crack growth characteristics between room and low temperatures are explained mainly by the crack closure and the strengthening due to the plasticity near the crack tip and roughness of the crack faces induced.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.359-365
• /
• 2002

The fatigue crack growth behavior of the SA516/60 steel which is used for pressure vessels was examined experimentally at room temperature $25^{\circ}C,\;-30^{\circ}C,\;-60^{\circ}C,\;-80^{\circ}C,\;-100^{\circ}C$ and $-120^{\circ}C$ with stress ratio of R=0.05, 0.1 and 0.3. Fatigue crack propagation rate da/dN related with stress intensity factor range ${\Delta}K$ was influenced by stress ratio in stable of fatigue crack growth (Region II) with an increase in ${\Delta}K$. The resistance of fatigue crack growth at low temperature is higher compared with that at room temperature, which is attributed to tile extent of plasticity-induced by compressive residual stress according to the cyclic loads. Fractographic examinations reveal that the differences of the fatigue crack growth characteristics between room and low temperatures are mainly explained by the crack closure and the strengthening due to the plasticity induced and roughness induced.

• 한국지진공학회논문집
• /
• 제25권5호
• /
• pp.191-199
• /
• 2021

In seismic design, hollow section concrete columns offer advantages by reducing the weight and seismic mass compared to concrete section RC bridge columns. However, the flexure-shear behavior and spirals strain of hollow section concrete columns are not well-understood. Octagonal RC bridge columns of a small-scale model were tested under cyclic lateral load with constant axial load. The volumetric ratio of the transverse spiral hoop of all specimens is 0.00206. The test results showed that the structural performance of the hollow specimen, such as the initial crack pattern, initial stiffness, and diagonal crack pattern, was comparable to that of the solid specimen. However, the lateral strength and ultimate displacement of the hollow specimen noticeably decreased after the drift ratio of 3%. The columns showed flexure-shear failure at the final stage. Analytical and experimental investigations are presented in this study to understand a correlation confinement steel ratio with neutral axis and a correlation between the strain of spirals and the shear resistance capacity of steel in hollow and solid section concrete columns. Furthermore, shear strength components (V_c, V_s·, V_p) and concrete stress were investigated.

• Steel and Composite Structures
• /
• 제29권2호
• /
• pp.201-218
• /
• 2018

In this study, the effects of magnesium sulfate on the mechanical performance and the durability of confined and unconfined geopolymer concrete (GPC) specimens were investigated. The carbon and basalt fiber reinforced polymer (FRP) fabrics with 1-layer and 3-layers were used to evaluate the performances of the specimens under static and cyclic loading in the ambient and magnesium sulfate environments. In addition, the use of FRP materials as a rehabilitation technique was also studied. For the geopolymerization process of GPC specimens, the alkaline activator has selected a mixture of sodium silicate solution ($Na_2SiO_3$) and sodium hydroxide solution (NaOH) with a ratio ($Na_2SiO_3/NaOH$) of 2.5. In addition to GPC specimens, an ordinary concrete (NC) specimens were also produced as a reference specimens and some of the GPC and NC specimens were immersed in 5% magnesium sulfate solutions. The mechanical performance and the durability of the specimens were evaluated by visual appearance, weight change, static and cyclic loading, and failure modes of the specimens under magnesium sulfate and ambient environments. In addition, the microscopic changes of the specimens due to sulfate attack were also assessed by scanning electron microscopy (SEM) to understand the macroscale behavior of the specimens. Results indicated that geopolymer specimens produced with nano-silica and fly ash showed superior performance than the NC specimens in the sulfate environment. In addition, confined specimens with FRP fabrics significantly improved the compressive strength, ductility and durability resistance of the specimens and the improvement was found higher with the increased number of FRP layers. Specimens wrapped with carbon FRP fabrics showed better mechanical performance and durability properties than the specimens wrapped with basalt FRP fabrics. Both FRP materials can be used as a rehabilitation material in the sulfate environment.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.101-104
• /
• 2008

염해에 노출이 심한 구조물이나 교량의 상판의 보강철근 부식으로 인한 콘크리트 구조물의 구조성능 및 내구성능의 저하가 큰 문제로 대두되고 있다. 이에 최근 활발히 연구가 진행 중인 섬유보강근(Fiber Reinforced Polymer Bar, 이하 FRP 보강근)은 높은 화학적 내구성, 고강도, 경량성 등에 의하여 철근을 대체할 콘크리트 보강재로 그 가치를 인정받아 미국, 유럽, 캐나다 등에서는 이미 FRP 보강근의 설계지침서가 발표되었다. 하지만 아직 FRP 보강근을 이형철근과 같이 높은 신뢰성을 가지는 보강재로 사용하기에는 파악해야할 구조적 문제가 많이 있는데 그 중 하나가 콘크리트와의 부착성능이다. FRP 보강근의 부착성능은 콘크리트 압축강도에 크게 영향을 받는 이형철근과 달리 섬유종류, 외피 표면 상태 등 여러 가지 요소에 의한 복합적 영향을 받는 부착특성을 보인다. 이에 본 연구에서는 외피 표면 상태, 콘크리트 압축강도, 반복하중 작용 등을 변수로 하는 GFRP 보강근으로 보강된일 방향 인장-인발 시편의 부착실험을 통하여 GFRP 보강근의 부착특성을 관찰하고자 하였다. 실험 결과 콘크리트 압축강도의 증가에 따라 GFRP 보강근의 부착강도는 증가하였으며 반복하중의 작용에 의하여 단조하중에서의 부착강도에 비하여 GFRP 보강근의 부착강도는 감소하는 결과를 보였다.