• Archives of Pharmacal Research
• /
• 제19권3호
• /
• pp.201-206
• /
• 1996

Nitric oxide (NO) is thought to be a second messenger involved in secretion. Upon stimulating pancreatic acinar cells with cholecystokinin-pancreozymin (CCK-PZ), NO formation has been shown to be associated with increased levels of cGMP (Seo et al., 1995). To elucidate the signaling pathway of VIP-induced enzyme secretion, we investigated the NO and cGMP synthesis steps as potential steps where two signal pathways triggered by CCK-PZ and VIP interact. The results obtained in this work provide evidence that increase in pancreatic enzyme secretion by treatment with VIP has no relationship with NOS activity and cGMP level. This conclusion was derived from the following findings that VIP treatment of rat pancreatic tissue increased amylase release as well as protein output in a dose- and time-dependent manner, whereas NOS activity and cGMP synthesis were not affected by VIP treatment as monitored by NOS activity assay and determining cGMP level, which was further confirmed by a NOS-inhibitor study. Consequently, CCK-PZ or VIP increases enzyme secretion in rat pancreatic tissue, but the two hormones are different in their mode of action. Together the results suggest that signaling pathway of VIP-induced enzyme secretion might either bypass the NO and cGMP synthesis steps or lie on a distinct pathway from CCK-PZ-induced pathway.

• Nuclear Engineering and Technology
• /
• 제46권1호
• /
• pp.117-124
• /
• 2014

The effect of various process variables on the powder properties of recycled $U_3O_8$ from MnO-$Al_2O_3$ doped large grain $UO_2$ pellets and the effect of those recycled $U_3O_8$ powders on the sintered density and grain size of MnO-$Al_2O_3$ doped large grain $UO_2$ pellets have been investigated. The evolution of morphology, size, and BET surface area of the recycled $U_3O_8$ powders according to the respective variation of the thermo-mechanical treatment variables of oxidation temperature, powder milling, and sequential cyclic heat treatment of oxidation and then reduction was examined. The correlation between the BET surface area of recycled $U_3O_8$ powder and the sintered pellet properties of MnO-$Al_2O_3$ doped pellets showed that the pellet density and grain size of doped pellets were increased and then saturated by increasing the BET surface area of the recycled $U_3O_8$ powder. The density and grain size of the pellets were maximized when the BET surface area of the recycled $U_3O_8$ powder was in the vicinity of $3m^2/g$. Among the process variables applied in this study, the cyclic heat treatment followed by low temperature oxidation was a potential process combination to obtain the sinter-active $U_3O_8$ powder.

• 한국표면공학회지
• /
• 제56권6호
• /
• pp.437-442
• /
• 2023

This research aims to enhance the efficiency of Pt/C catalysts due to the limited availability and high cost of platinum in contemporary fuel cell catalysts. Nano-sized platinum particles were distributed onto a carbon-based support via the polyol process, utilizing the metal precursor H₂PtCl₆·6H₂O. Key parameters such as pH, temperature, and RPM were carefully regulated. The findings revealed variations in the particle size, distribution, and dispersion of nano-sized Pt particles, influenced by temperature and pH. Following sodium hydroxide treatment, heat treatment procedures were systematically executed at diverse temperatures, specifically 120, 140, and 160 ℃. Notably, the thermal treatment at 140 ℃ facilitated the production of Pt/C catalysts characterized by the smallest platinum particle size, measuring at 1.49 nm. Comparative evaluations between the commercially available Pt/C catalysts and those synthesized in this study were meticulously conducted through cyclic voltammetry, X-ray diffraction (XRD), and field-emission scanning electron microscopy-energy dispersive X-ray spectroscopy (FE-SEM EDS) methodologies. The catalyst synthesized at 160 ℃ demonstrated superior electrochemical performance; however, it is imperative to underscore the necessity for further optimization studies to refine its efficacy.

• 한국분말재료학회지
• /
• 제22권5호
• /
• pp.309-314
• /
• 2015

Tungsten trioxide thin films are successfully synthesized by a sol-gel method using tungsten hexachloride as precursors. The structural, chemical, and optical properties of the prepared films are characterized by scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and UV-Vis spectrophotometry. The electrochemical and electrochromic properties of the films before and after heat treatment are also investigated by cyclic voltammetry, chronoamperometry, and in situ transmittance measurement system. Compared to as-prepared films, heat-treated tungsten trioxide thin films exhibit a higher electrochemical reversibility of 0.81 and superior coloration efficiency of $65.7cm^2/C$, which implies that heat treatment at an appropriate temperature is a crucial process in a sol-gel method for having a better electrochromic performance.

• The Korean Journal of Pain
• /
• 제11권1호
• /
• pp.113-115
• /
• 1998

Dysmenorrhea(cyclic pain associated with menses) is a frequent disorder, with as many as 50% of young women experiencing the symptom, and up to 10% being unable to function normally for some time each month. The most recent theory of the cause of the pain of dysmenorrhea incriminates uterine ischemia and sensitization of uterine pain fibers resulting from excessive myometrial contractility after prostaglandin stimulation. We administered stellate ganglion block for the treatment of dysmenorrhea and had good results in two cases. From our experience, we recommend the stellate ganglion block may be an effective treatment for a dysmenorrhea.

• Environmental Engineering Research
• /
• 제22권2호
• /
• pp.157-161
• /
• 2017

Simultaneous treatment of food waste leachate and power generation was investigated in an air-cathode microbial fuel cell. A TCOD removal efficiency of $95.4{\pm}0.3%$ was achieved for an initial COD concentration of 2,860 mg/L. Maximum power density ranged was maximized at $1.86W/m^3$, when COD concentration varied between 60 mg/L and 2,860 mg/L. Meanwhile, columbic efficiency was determined between 1.76% and 11.07% for different COD concentrations. Cyclic voltammetric data revealed that the oxidation peak voltage occurred at -0.20 V, shifted to about -0.25 V. Moreover, a reduction peak voltage at -0.45 V appeared when organic matters were exhausted, indicating that reducible matters were produced during the decomposition of organic matters. The results showed that it was feasible to use food waste leachate as a fuel for power generation in a microbial fuel cell, and the treatment efficiency of the wastewater was satisfied.

• Childhood Kidney Diseases
• /
• 제27권2호
• /
• pp.76-81
• /
• 2023

Tolvaptan is a highly selective vasopressin receptor 2 antagonist that regulates cyclic adenosine monophosphate levels to inhibit both epithelial cell proliferation and chloride ion excretion, two mechanisms known to induce cyst expansion in autosomal dominant polycystic kidney disease (ADPKD). Tolvaptan is currently the preferred treatment of rapidly progressive disease ADPKD in adult patients; however, since cyst formation in ADPKD begins early in life, (frequently in utero), and significant disease progression with cyst expansion occurs in the first decade, tolvaptan may be advantageous as a preemptive treatment in children with ADPKD. Tolvaptan has already been used to successfully treat refractory edema or hyponatremia in children; this literature review provides insight into the biochemical basis of its action to contextualize its use in the pediatric population.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권4호
• /
• pp.1-10
• /
• 2022

이 연구에서는 강재 스프링을 감쇠 장치로써 사용 가능성을 평가하기 위해서, 강재 스프링의 인장 및 반복하중 실험을 수행하였다. 주요 실험변수는 강재의 종류(SAE9254 및 SS275), 스프링상수(700 N/mm, 1,000 N/mm 및 1,400 N/mm) 및 SAE9254의 열처리 유·무이다. 인장 실험 결과, SAE9254로 제작된 강재 스프링의 설계 스프링상수와 측정 스프링상수의 비는 1.08 ~ 1.13이며, SS275로 제작된 강재 스프링의 설계 스프링상수와 측정 스프링상수의 비는 0.86 ~ 0.97로 측정되었다. 항복 이후 열처리 유·무에 따른 SAE9254로 제작된 스프링의 하중-변위 관계 기울기는 약 240 ~ 251 kN/mm 및 92 N/mm 이었으며, SS275로 제작된 스프링의 하중-변위 관계 기울기는 거의 0이었다. 반복하중 실험 결과에서 모든 실험체는 KDS 41 17 00 (2019)에서 요구하는 변위 의존형 감쇠 장치의 적합 조건인 변위 원점에서의 하중 조건, 최대변위에서 하중 조건 그리고 에너지 소산 능력 조건을 모두 만족하였다. 그리고 열처리 안 된 SAE9254 및 SS275로 제작된 강재 스프링의 등가 감쇠비는 열처리 된 SAE9254로 제작된 스프링에 비해 각각 약 2.8배 및 1.9배 높은 수준이었다.

• 한국분말재료학회지
• /
• 제17권1호
• /
• pp.1-6
• /
• 2010

In this study, a convergent heat treatment was performed in certain temperature regions in order to control the microstructures of Nd-rich phases and to reduce thermal stress on grain boundaries which could be caused during expansion and shrinkage of Nd-rich and $Nd_2Fe_{14}B$ phases. The difference of thermal expansion coefficient between $Nd_2Fe_{14}B$ and Nd-rich phases is the mechanism for convergent heat treatment. The Nd-rich phases which were located in junctions could penetrate into the grain boundaries between $Nd_2Fe_{14}B$ phases due to the difference of thermal expansion coefficient. Through the convergent heat treatment, the microcracks that were observed in cyclic heat treatment were not observed and coercivity was increased to 34.05 kOe at 8 cycles.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제22권4호
• /
• pp.7-17
• /
• 2016

Purpose: As our population ages and becomes an elderly society the number of elderly care hospitals is rapidly increasing. Because physical functions and spatial perception in the elderly decrease with age, these hospitals require more systematic and intelligent space designs. The design of these spaces are even more complex because they must accommodate medical programs to treat various different diseases and ailments and also because there are many first time patients and irregular short term patients that seek out outpatient treatment services. Also by analyzing the spatial configuration systems and systematic relationships between each of the functional spaces of the outpatient treatment service departments for hospitals specialized in care for the elderly by focusing on the hallway and corridor systems of these hospitals, the according characteristics and trends were examined. Methods: Based on preceding research, the types of hallway and corridor systems of these hospitals were categorized into five types, including gallery corridors, middle corridors, hall-type, mixed type and cyclic type corridors, and into six types according to function including by medical diagnosis, patient registration, examination, administration and convenience and shared common space to derive any interconnecting relationships between the corridor systems. Also by comprehensively examining the types and combined utilization of the corridor types and the integration and the intelligibility of the space syntax, any trends within the corridor system were derived. The elderly care hospitals examined in this research study were twelve hospitals that opened after the year 2000 in Korea with more that 150 sick beds with areas larger than $1000m^2$ and with all outpatient medical service related rooms located entirely on a single floor of the hospital. Results: The following results could be confirmed based on this research study. 1) The spaces where medical diagnosis and examination occurred were adjacent, and the movement lines for first time patients and re-visiting patients were taken into consideration by separating the treatment space. 2) This research study confirmed that the larger the size of the hospital was, there were more detailed categorizations of treatment services and that there was a tendency for treatment areas to be separated and independent from examination areas. 3) There was a tendency for integration and intelligibility to decrease the more complex and diverse the combination of hall types designed into the corridor systems of these hospitals was. cyclic type corridors dramatically decreased the intelligibility of the corridor systems of these hospitals. 4) The priority rank of these spaces were confirmed to be highest in the order of registration, diagnosis, examination, treatment, administration and shared common spaces. However it was confirmed for the local integration that the diagnosis scope had the highest priority rank. Implications: There were exceptional cases confirmed where the number of unit spaces did not have an absolute effect on integration and intelligibility. These results can be interpreted to mean that this can be overcome through efficient architectural planning.