• 가정과삶의질연구
• /
• 제9권2호
• /
• pp.155-170
• /
• 1991

The purpose of the study was to investigate the effects of demographic-socialogical variables.(ie. educational level, duration of marriage, mate selection type, monthly income, number of children and the frequencies of family's jonit-leisure-activity) and efficiency of the interspous communication on marital satisfaction over the family life cycle. The subject were 278 husbands and wives living in Seoul area who had the eldest child attending at elementary school, middle school , high school and university , respectively. The families were categorized to Duvall's family life cycle. Before the main study was conducted from SEP. 27 to OCT. 8. 1990. a pre-test was conducted on 52 subjects form SEP. 20 to SEP.23.1990. The values of Chronbach's α were obtained on the efficiency of the interspouse communication (α =0.885) and marital satisfaction (α=0.939). Data analysis was by Chronbach's α, ANOVA. Pearson's Product Moment Correlation. Path Analysis and Multiple Regression Analysis. The results were as follows; 1) Marital Satisfaction was positively related (1) to demographic-socialogical variables; educational level , monthly income, the frequencies of family's joint-leisure-activity (2) the efficiency of the interspouse communication. 2) Efficiency of the interspouse communication was positively related to the frequencies o family's joint-leisure-activity. 3) The relative importance of independent variables on marital satisfaction over the family life cycle was found to be varied in each stage of life cycle. (1) As for the group who had elementary-school-aged children; efficiency of the interspouse communication (β=0.717.p<.001), joint-leisure-activity frequency (β =0.303.p<.001), monthly income(β=0.202.p<.001), mate selection type(β=0.180.p<.05), (2) As for the group who had middle-school-aged children; efficiency of the interspouse communication (β=0.702.p<.001), (3)As for the group who had high school-aged children; efficiency of the interspouse communication (β=0.488.p<.001), joint-leisure-activity frequency (β=0.368.p<.001), (4)the group who had university-aged children; efficiency of the interspouse communication.(β=0.729.p<.001), monthly income (β=0.164.p<.01). The regression model showed that 55 percent of the marital satisfaction could be account for by demographic-socialogical variables and efficiency of the interspouse communication (R2=0.551)

• 제어로봇시스템학회논문지
• /
• 제15권6호
• /
• pp.612-618
• /
• 2009

This study is concerned about the optimal design of the arm 1 and arm 2 in the SCARA robot. The mass and inertia moment of the arm I and arm 2 in a SCARA robot is greatly affected on the performance such as a cycle time, and torques loaded on $1^{st}$ axis and $2^{nd}$ axis. To reduce the mass and inertia moment, this study carried out optimal design by FEM analysis using parametric variables, which is a width, a height of the rib and a thickness of arm in the arm. The rib is adapted instead of reducing the thickness in the arm. And the simulation by computer was conducted on two given paths in X direction and Y direction. After optimal design, the result showed that maximum torque of $1^{st}$ axis and $2^{nd}$ axis reduced to maximum 9.5% on a given path.

• 한국정밀공학회지
• /
• 제21권8호
• /
• pp.97-105
• /
• 2004

The vertical roller mill is the important machine grinding and mixing various crude materials in the manufacturing process of portland cement. Table liner is one of grinding elements of vertical roller mill and is subjected to the cyclic bending stress by rollers and the centrifugal force by rotation of table. It demands $4{\times}10^7$ expense of life but has $4{\times}10^6~-8{\times}10^6$ cycle. It fractures at the edge of grinding path of outside roller The repair expense fur it amounts to 30% of total maintenance of vertical roller mill. Therefore, this study shows the fracture mechanism of table liner of vertical roller mill using HDM and fatigue analysis

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.55-59
• /
• 2004

Recently, life cycle and lead-time of products have been shortened with the demand of customers. Therefore, it is important to reduce time and cost at the step of manufacturing trial molds. In order to realize three dimensional shape on CAD, the machining process has been widely used because it offers practical advantages such as precision and versatility. However, traditional machining process spends a lot of time in cutting product and the remained material causes trouble such as inconvenience for clean. In this work, a new machining process using the hot tool has been proposed to overcome those limitations. In the process, the hot tool moves the predetermined path and the heat of the tool decomposes the remained material. In order to set up the process, the hot tool to satisfy requirements is designed and the material thermal properties are obtained using the DSC and TGA machine. The relationships between process parameters and thermal radius of the tool are obtained through experiment.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.376-379
• /
• 2000

This paper presents an improved ZVS partial series resonant DC/DC converter (PSRC) with low conduction losses suitable for high power and high frequency applications. The proposed PSRC have advantages of zero-voltage-swiching (ZVS) of main switches for entire load ranges and low conduction losses of main switches by decreasing current stresses Also the reduction of the effective duty cycle is not occurred during the resonant period of the main circuit because the auxiliary circuit of the proposed converter is placed out of the main power path. An improved ZVS PSRC has a so much characteristics with respect to the reduction of current stress. The operation principles of the proposed converter are explained in detail and the various simulated and experimental results show the validity of the proposed converter.

• 한국생산제조학회지
• /
• 제9권4호
• /
• pp.34-47
• /
• 2000

Since carbon fiber epoxy composite materials have excellent properties for structures due to their high specific strength, high specific modulus, high damping and low thermal expansion, the hollow shafts made of carbon fiber epoxy composites have been widely used for power transmission shafts for motor vehicles , spindles of machine tools, motor base, bearing mount for tool up and manufacturing. The molded composite machine elements are not usually accurate enough for mechanical machine elements, which require turning drilling , cutting and grinding. The experiment are surface grinding wheel GC60 to the carbon fiber epoxy composite specimen with respect to staking angle [0]nT , [45]nT, [90]nT on the CNC grinding machine. In this paper, the surface grinding characteristics of composite plate, which are surveyed experimentally and analytically with respect to the grinding force, surface roughness and wheel loading according to the variable depth of cut, wheel velocity and table feed rate are investigated.

• International Journal of Automotive Technology
• /
• 제5권2호
• /
• pp.115-122
• /
• 2004

Evaluation of active safety control systems usually relies heavily on field testing and is time-consuming and costly. Advances in computer simulations make it possible to perform exhaustive design trials and evaluations before field testing, and promise to dramatically reduce development cost and cycle time. In this paper, a comprehensive simulation-based evaluation procedure is proposed, which combines standard evaluation maneuvers, worst-case techniques, and a driver model for closed-loop path following evaluations. A vehicle dynamic controller (VDC) for a popular Sport Utility Vehicle is evaluated using the proposed procedure. Simulation results show that the proposed procedure can be used to assess the performance of the VDC under various conditions and provides valuable information for the re-design of the VDC.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.946-949
• /
• 2006

With repeated coverage, spaceborne SAR (Synthetic Aperture Radar) instruments provide the most efficient means to monitor and study the changes in important elements of the marine environment. Due to highresolution of SAR data, the coverage of SAR sensor is always limited, especially for a repeat cycle. With more SAR sensors from various satellites, new data products such as ocean surface drift can be derived when two SARs' tracks overlap in a short time over coastal areas. Currently, there are two SAR sensors on different satellites with almost the exactly same path. That is, ERS-2 is following ENVISAT with a 30-minutes delay, which will be a good timing for ocean mesosclae feature tracking. For another application, a mystery ship near a big eddy with strong ship wake has been tracked between ERS-2 and ENVISAT SAR images to estimate its ship speed.

• 한국정밀공학회지
• /
• 제15권2호
• /
• pp.21-27
• /
• 1998

NC machining of large screw which is usually used as a part in an extruder for injection molding is done on 3-axis turning machine, and it is very time-consuming process. Not only in machining but in preparing part program for a NC machine, it requires very long time because the shape of the screw is not easy to model when using an existing general CAD/CAM software even though it is workstation level software. In addition, tool path generation procedure for NC turning for screw shape is also very tedious one because large amount of data for cutter location point must be produced and there is no specific CAM software for the machining. In this paper. development of a CAM system for screw machining which saves the role of CAD software by use of menu driven data input system for various screw shapes is introduced.

• 한국정밀공학회지
• /
• 제20권9호
• /
• pp.166-172
• /
• 2003

Vibration and Noise of air conditioner are entirely determined by compressor vibration. Compressor vibration transmitted to the enclosure of air conditioner or pipes connected compressor with heat exchanger. Enclosure generate(noise and vibration. Therefore, the analysis of compressor vibration analysis is considered significant technical issue. For the reduction of vibration of compressor, it is necessary to grasp correctly vibration transmission paths and excitation sources in the compressor shell. Because, shell ( Surface of compressor ) shows whole vibration characteristic of compressor mechanism. In this paper, vibration intensity was applied to measure vibration energy flow on the shell .From this technique, it is possible to catch the path of vibration propagation along the one cycle and the location of vibration energy sources may change with time on the shell.