• Journal of Korean Society of Forest Science
• /
• v.97 no.4
• /
• pp.452-457
• /
• 2008

In order to develop an efficient micropropagation technique effect of plant growth regulators (PGRs) affecting on shoot proliferation from shoot apex in Pyrus ussuriensis was tested. Generally, there was no conspicuous effect on shoot induction by the treatment of PGRs and one or two shoots/explant were induced when cultured on MS medium supplemented with BA and/or BA plus NAA. Both apical shoot necrosis and hyperhydric shoots were observed frequently in multiplied shoots, and callus was formed at the basal part of shoots. About 20% spontaneous rooting was achieved in growing shoots, however the proliferated shoots exhibited poor rooting rate in gelrite supported media. When we tried to ex vitro rooting of the shoot cutting, the shoot cuttings rooted up to 50% with 100 mg/L IBA application. The rooted plantlets grew normally after acclimatization in the greenhouse.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.5
• /
• pp.22-26
• /
• 2010

Recently, due to the tremendous growth of media technology, demands of the aspheric glass lens which is a high-performance and miniaturized increase gradually. Generally, the aspheric glass lens is manufactured by Glass Molding Press (GMP) method using tungsten carbide (WC) mold core. In this study, the thermal deformation which was occurred by GMP process was analyzed and applied it to compensate the aspheric glass lens. The compensated lens was satisfied that can be applied to the actual specifications.

• Journal of the Speleological Society of Korea
• /
• no.61
• /
• pp.65-82
• /
• 2000

The remarkable development of information technology today is significantly increasing the desire for related services as it allows one to process and transmit information fast and accurately as well as in an efficient way. Particularly, the spread of the Internet even changes our life pattern, not to mention allowing us to provide or share information. One of the most typical example is electronic commerce. The e-commerce industry, which is build upon informations super high way, is growing rapidly, backed on the development of communications technology and the combination of various media. Companies are active In embracing and utilizing the cutting-edge information technology, whereas the tourism industry in general is still at a rudimentary stage. Therefore, it is expected that the industry will harness e-commerce in many aspects. Tourism, in its characteristic, has a variety of sectors, and cross-sector cooperation is essential. Therefore, the industry can provide better services by connecting or integrating network systems and taking advantage of e-commerce, while it is of no less importance to have informal ion system for promoting products. This thesis will look into and the basic concept and role of e-commerce as well as the existing tourism information system. It will also study ways to make good use of e-commerce by adopting it into the tourism information system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.924-925
• /
• 2013

최근 미세가공 및 자동측정 분야가 고성능화 되어 자동화가 많이 실현되고 있다. 이러한 자동화는 고정밀도와 동시에 제품 생산에 대한 저비용, 단기납기, 고품질의 제품 창출로 이어진다. 현재 핸드폰 시장이 급성장함에 따라 핸드폰의 생산 주기가 현저하게 짧아지고 핸드폰 조립공정에 있어서 다양한 크기에 대한 핸드폰 평판표시장치인 LCD(Liquid Crystal Display)가 존재하고 있다. 핸드폰 조립공정에 있어서 이러한 다양한 LCD 표시장치(LCD, PDP, FED등)를 보호하기 위하여 보호매체인 PE/PET 필름을 부착하여 납품하도록 하고 있으며, 핸드폰 조립공정에서 발생할 수 있는 흠집 등 기타 불량을 줄이도록 노력하고 있다. 그러나 이러한 보호필름은 현재 핸드폰 조립공정 후판부에서 평판표시장치의 유리기판의 크기에 맞게 보호필름을 절단하도록 공정이 구성되어 있다. 본 논문에서는 이러한 핸드폰 조립공정을 개선하고 자동화하기 위하여 경박단소용 평판표시장치의 얇은 유리기판에 접착된 PE/PET 필름을 핸드폰의 다양한 패턴에 맞추어 하단의 유리기판에는 결함이 없도록 하여 보호필름만을 커팅 할 수 있는 커팅시스템을 제안하고 정밀계측에 대한 실험 데이터를 제시하고자 한다.

• Journal of Broadcast Engineering
• /
• v.26 no.7
• /
• pp.855-861
• /
• 2021

Neural Architecture Search (NAS) is cutting-edge technology in the machine learning community. NAS Without Training (NASWOT) recently has been proposed to tackle the high demand of computational resources in NAS by leveraging some indicators to predict the performance of architectures before training. The advantage of these indicators is that they do not require any training. Thus, NASWOT reduces the searching time and computational cost significantly. However, NASWOT only considers high-performing networks which does not guarantee a fast inference speed on hardware devices. In this paper, we propose a multi objectives reward function, which considers the network's latency and the predicted performance, and incorporate it into the Reinforcement Learning approach to search for the best networks with low latency. Unlike other methods, which use FLOPs to measure the latency that does not reflect the actual latency, we obtain the network's latency from the hardware NAS bench. We conduct extensive experiments on NAS-Bench-201 using CIFAR-10, CIFAR-100, and ImageNet-16-120 datasets, and show that the proposed method is capable of generating the best network under latency constrained without training subnetworks.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.7
• /
• pp.1794-1806
• /
• 2023

This study presents a method for capturing photographs of users as input and converting them into 2D character animation sprites using a generative adversarial network-based artificial intelligence network. Traditionally, 2D character animations have been created by manually creating an entire sequence of sprite images, which incurs high development costs. To address this issue, this study proposes a technique that combines motion videos and sample 2D images. In the 2D sprite generation process that uses the proposed technique, a sequence of images is extracted from real-life images captured by the user, and these are combined with character images from within the game. Our research aims to leverage cutting-edge deep learning-based image manipulation techniques, such as the GAN-based motion transfer network (impersonator) and background noise removal (U² -Net), to generate a sequence of animation sprites from a single image. The proposed technique enables the creation of diverse animations and motions just one image. By utilizing these advancements, we focus on enhancing productivity in the game and animation industry through improved efficiency and streamlined production processes. By employing state-of-the-art techniques, our research enables the generation of 2D sprite images with various motions, offering significant potential for boosting productivity and creativity in the industry.

• Journal of Korean Home Economics Education Association
• /
• v.4 no.1
• /
• pp.87-95
• /
• 1992

The purpose of this study is to suggest how we can get over the difficulties of practical drill under experimentation concerning the units of making clothes in the curriculum of home economics. The import of this study was based on the results of the preceding studies the field of the making Korean clothes, from the standpoint of the teaching tools and teaching materials by the use of VTR, is one of the most insufficient. On the one hand, the teaching procedure here a VTR, running 34 minutes or so, was made up with the process of making Korean men’s slacks, and was led by the researcher’s own. The contents of the lesson are as follows： the shape of Korean clothes, the name of each part, the process of drawing, cutting and sewing, and the items of evaluation and arrangement. On the other hand, the two comparative groups were made to compare one with the other： One group was taught by help of VTR media, and the other by the model performance and explanation of the instructor’s own. All of the statistical data were analyzed in terms of SPSS/PC, and t-verification was made, to make difference between the two, after standard deviation was calculated according to the classified domains. The consequences of the test research are shown as below： 1. The difference of understanding was obviously made in considering that the group made a better score than the comparative one in understanding to process of making Korean clothes. 2. The difference of skill was highly made in considering that the group made a better score than the comparative one in the practical drill of making Korean clothes. 3. The difference of interests was evidentally made in considering that the group made a better score than the comparative one in the stage of making Koran clothes. Such means that the motivation and attitude of the learners was made stimulate by the Audio-Visual material than by the traditional cramming method. 4. The difference of frequency was fairly made in considering that the experimeatal group made a better score than the comparative one in the frequency of individual teaching. 5. The difference of the efficiency of time-consumption was clearly made in considering that the experimental group made a better score than the comparative one. As the results of the research above, the medium of VTR proved to more effective to the achievement of schoolwork and the strategies of teaching. Therefore, more use of VTR media will help the instructors with the difficulties of practical drill in the whole process of making Korean clothes； Widely use of VTR media in teaching will be surely more fruitfull to the unit of making Korean clothes than teaching by explanation.

• Journal of Broadcast Engineering
• /
• v.24 no.3
• /
• pp.411-419
• /
• 2019

Nowadays we are not able to consider and imagine anything without taking into account what is called Artificial Intelligence. Even broadcasting media technologies could not be thought of outside this newly emerging technology of A.I.. Since the last part of 20th century, this technology seemingly is accelerating it's development thanks to an unbelievably enormous computational capacity of data information treatments. In conjunction with the firmly established worldwide platform companies like GAFA(Google, Amazon, Facebook, Apple), the key cutting edge technologies dubbed NBIC(Nanotech, Biotech, Information Technology, Cognitive science) converge to change the map of the current civilization by affecting the human relationship with the world and hence modifying what is essential in humans. Under the sign of the converging technologies, the relatively recently coined concepts such as 'trans(post)humanism' are emerging in the academic sphere in the North American and Major European regions. Even though the so-called trans(post)human movements are prevailing in the major technological spots, we have to say that these terms do not yet reach an unanimous acceptation among many experts coming from diverse fields. Indeed trans(post)humanism as a sort of obscure term has been a largely controversial trend. Because there have been many different opinions depending on scientific, philosophical, medical, engineering scholars like Peter Sloterdijk, K. N. Hayles, Neil Badington, Raymond Kurzweil, Hans Moravec, Laurent Alexandre, Gilbert Hottois just to name a few. However, considering the highly dazzling development of artificial intelligence technology basically functioning in conjunction with the cybernetic communication system firstly conceived by Nobert Wiener, MIT mathematician, we can not avoid questioning what A. I. signifies and how it will affect the current media communication environment.

• Journal of Digital Convergence
• /
• v.10 no.10
• /
• pp.483-490
• /
• 2012

In parallel with advancement of the industrial society and accompanied quality-of-life improvement, jewelry is now rather viewed as one of common accessories used in daily life, than as a luxurious item as treated before change of perception about it in the past, attracting thus gradually multiplying demand for it. Thanks to rapid spread of multi media like the Internet, an increasing number of people have come to develop great liking for exceptional design and unique format of jewelry products. Following drain of their reserves, natural gems are unlikely to meet the demand for them fully in the future. As a consequence, it seems essential to rely on synthetic, artificial, imitation jewelry or organic substances and quasi-mineral in amorphous structure for substitute jewelry. Since synthetic jewelry has such a great potential as substitute jewelry, it is expected to maximize added value to jewelry if and when accompanied with development of creative design and upgrading of processing technology for jewelry, in addition to various types of synthetic jewelry and glass that have been already put in use as substitute substances. Synthetic jewelry is thus believed to be able to greatly contribute to progress of the jewelry industry. In many countries of the world, jewelry and gem industry has been regarded as one of promising sectors vital in enriching the national wealth. In this context, the Korean Ministry of Finance and Economy announced in July 2007 "an activating policy for the jewelry and gem industry, declaring to cultivate and grow it to be new engine for the nation's growth". The present paper thus aims to conduct a study exclusively on cutting design of synthetic jewelry as a part of measures to activate the jewelry industry in Korea. Efforts are made to develop designs for jewelry that are unique and different from the conventional stereotyped form of polishing and are added with color, pattern and fashionable cutting. Priority is given in this regard to designing jewelry that may attract general public and may be shared by public beyond the limit of conventional design for jewelry and producing products that stand in contrast with other products. By upgrading the quality of jewelry design, competitiveness of the jewelry industry may be ensured and the creative area of jewelry design may be expanded by far.

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.363-370
• /
• 2018

The succulent plants of Echeveria genus are in increasing demand worldwide, but it is difficult to supply good quality young plants throughout the year because propagation efficiencies are depend on cultivar and environmental factors. This study was carried out to investigate the propagation efficiencies of leaf cutting in Echeveria cultivars at different LED light qualities in a closed-type plant factory system. Leaf cuttings cut from stock plants of six difficult-to-propagated cultivars 'Afterglow (AG)', 'Berkeley Light (BL)', 'Mason (MS)', 'Subsessilis Light (SL)', 'Cream Tea (CT)', and 'Ben Badis (BB)' were put into cutting media in the plant factory system maintained at a temperature of $24{\pm}2^{\circ}C$ and relative humidity of $60{\pm}10%$, and watered with over-head irrigation twice a week. Cuttings were irradiated with sole or mixed red (R, 660 nm), blue (B, 450 nm), green (G, 530 nm), and far-red (FR, 730 nm) LEDs as follows: R10, R8+B2, R5+B5, R7+B2+FR1, and R7+B2+G1. PPFD just above the cuttings was $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ and photoperiod was 16/8 (light/dark) hours. As a result, propagation efficiencies were dependent on cultivar. Rooting and shooting were relatively easy in 'SL' but shoot formation in 'AG' was very difficult. Light qualities from LEDs also affected plant regeneration. Light conditions with a higher ratio of B, R5+B5, R7+B2+FR1, and R7+B2+G1, promoted shoot formation and growth but inhibited rooting and root growth. R10 and R8+B2 with a higher ratio of R promoted rooting and root growth and inhibited shoot formation and growth of cuttings. In addition, the treatment with FR increased leaf size and biomass of the all plants. Therefore, further studies are needed to investigate the optimum compositions of LED light quality for the improvement of leaf cutting efficiency in difficultto-propagated Echeveria cultivars.