• Journal of the Korean Geosynthetics Society
• /
• v.16 no.4
• /
• pp.163-176
• /
• 2017

The Discrete Element Method (DEM) has been widely used in civil engineering as well as various industrial fields to simulate granular materials. In this study, DEM was adopted to predict the performance of the face plate-type earth pressure balance (EPB) shield TBM (Tunnel Boring Machine). An analysis of the TBM excavation performance was conducted according to two pre-defined excavation conditions with the different rotation speeds per minute (RPM) of the cutterhead. The TBM model which was used in this study has a 6.64 m of diameter and six spokes. Also, 37 precutters and 98 scrapers at an each spoke were modeled with a real-scale specification. From the analysis, compressive forces at the cutterhead face, shield and cutting tools, resistant torques at the cutterhead face, muck discharge rate and accumulated muck discharge by the screw auger were measured and compared.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.373-379
• /
• 2015

Supply units in each command are multi-tiered and each supply unit keeps a supply level independently, which can cause excess stock, leading false reports to the Logistics Command and increasing difficulties in managing user needs. This causes excess assets and the excess then causes deformation in demand. therefore, the supply support systems of our armed forces have become high-cost/low-efficiency and are insufficient to meet the needs of users in combat units. Civilian corporations and the US Department of Defense are downsizing the aforementioned multi-tiered supply systems thus revolutionizing efficient and effective logistics by adopting Supply Chain Management(SCM), and Prime Vendor policies. Prime Vendor policy is a logistics support method that allows users to directly request and receive supply items from suppliers, based on supply contracts between suppliers and central maintenance organizations like KDA. In other words, it is a system that allows for users to make orders to suppliers directly and suppliers to deliver goods to the users directly, cutting out the middle stage, thus allowing an efficient supply. This is a way forward in finance that cuts costs in net supplies and allows an efficient utilization of civilian assets. which is also known to fasten the speed of logistical support and stripping down the logistical structure. therefore, this report will explore Prime Vendor policies adopted in certain number of units for medical supplies that were taken in consideration of improvements in stock management in civilian organizations and the US Army, and aims to apply such policies for repair parts.

• Korean Journal of Acupuncture
• /
• v.30 no.1
• /
• pp.47-55
• /
• 2013

Objectives : The purpose of this study was to determine whether electroacupuncture(EA) is effective in reducing pain on the severe ankle sprain classified as grade 3 in rats. Methods : The severe(grade 3) ankle sprain model was induced surgically by ankle ligament injury(the anterior talofibular, the calcaneofibular and the posterior talofibular) in the Sprague-Dawley rats(180~250 g). The effects of EA on weight bearing forces(WBR) of the affected foot were examined in a rat model of ankle sprain. EA was applied to either SI6, ST37, GB34, GB39 or GB42 acupoints by trains of electrical pulses(2 Hz, 1 ms pulse width, 2 mA intensity) for 15 min. Results : Cutting of the lateral ankle ligament complex produced the severe ankle sprain symptoms as grade 3. EA of the contralateral SI6 resulted in more analgesic effect than one of ipsilateral SI6 even though there was significant effect. EA of the ipsilateral GB34 and GB39 produced potent analgesic effects on the surgical ankle sprained pain behaviors. However, there were no significant analgesic effects in the contralateral GB34 and GB39 EA groups. In addition, both side of ST37 and GB42 did not result in analgesic effect on the surgical ankle sprained rat. Conclusions : The data suggest that EA induced analgesia shows point specificity on the severe ankle sprained pain model classified as grade 3.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1C
• /
• pp.109-117
• /
• 2012

Studying the major wars of the past seventy years, the most fundamental change is the transition of weapon systems to one of convergence and cutting edge / state of the arts technology. Such transition is creating a need for drastic reforms of the weapon systems development process especially in areas of / in regards to effective utilization of IT, reduction of development period, precise establishing of operational concept and, management of required operational capability(ROC). In particular, establishing an accurate operational concept for a new weapon system and efficient management of ROC based on this operational concept is a prerequisite for a low-cost and high-efficiency weapon systems development and in the end, a successful construction of military forces. This paper examines the current management procedure of the ROC of the Korean military and proposes improvements to the procedure while taking into consideration issues of elicitation, analysis and validation of requirements engineering.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.4
• /
• pp.129-139
• /
• 2018

The Discrete Element Method (DEM) has been widely used in granular material researches. Especially, if material has a large deformation, such as ground, it can be a useful method to analyze. In this study, to simulate ground formations, DEM was used. The main purpose of DEM analysis was to investigate the numerical model which can predict the TBM performance by simulating excavating procedure. The selected EPB TBM has a 7.73 m of diameter and six spokes. And two pre-defined excavation conditions with the different rotation speeds per minute (RPM) of the cutterhead was applied. In the modeled cutterhead, the open ratio of cutterhead was 21.31% and number of cutters (including disc cutter and cutter bit) was 219. From the results, reaction forces and resistant torques at the cutterhead face and cutting tools, were measured and compared. Additionally the muck discharge rate and accumulated muck discharge by the screw auger were evaluated.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.3
• /
• pp.193-205
• /
• 2019

Looking at recent safety accidents in buildings, most of them due to lack of FM expertise, and this is due to human resources. In each all industry areas, some companies are competitive, representational, and leading in the market through long-term expertise and research in their respective fields. In the field of FM industry, some companies offer core-competencies in internal and external innovative building management through competition with others. However, old custom and old management form still exist in the FM field. However, an old custom and old management system still exist in the FM field; it forces cost-cutting and caused by carelessness in technical development competitiveness and safety measures. The government control by safety inspection and facility inspection through legislation of building management, but the management is still weak as a side of in the facility management section due to inspect sth as a mere formality and submit a paper report. These facts exist different kind of usage of the building have a three-party encounter between a building owner, user, and FM enterprises. In this research identify survey, especially building owner (manager)'s choice perception priority for optional factors to choose FM enterprises. Based on this, FM enterprises will be forced to seek a new dimension for better building management. In this light, the purpose of the research is to shape changes in the FM market culture safely and providing better service in building management and understanding building owner's insight through this research's information.

• Journal of the Korean Society of Food Culture
• /
• v.9 no.1
• /
• pp.53-59
• /
• 1994

This study was attempted to investigate the effects of preheating treatment and chitosan addition on the textural properties of Korean radish during salting. For this study, we determined the changes in textural properties by compression, puncture, cutting tests respectively and the changes in pectin fractions were also determined. Sensory parameters such as hardness, crispness and toughness were evaluated by sensory analysis and their results were correlated with those by Instron. The results were as follows. The compression force of nonpreheated Korean radish was increased by chitosan addition, whereas that of preheated one was decreased during salting. The puncture force from all the samples of Korean radish decreased, however, chitosan addition showed higher puncture force. The cutting force of nonpreheated Korean radish increased during salting and those from nonpreheated and preheated ones were increased by chitosan addition. During salting hot water soluble pectin(HWSP) of nonpreheated Korean radish increased and 0.4% Na-hexametaphosphate soluble pectin(HXSP) and 0.05 N-HCl soluble pectin(HCISP) decreased respectively. However, HXSP was decreased by preheating treatment. On the contrary, the results were reversed by chitosan addition. Hardness and crispness of nonpreheated Korean radish decreased and toughness increased respectively during salting. However, toughness was decreased by preheating treatment and hardness was increased by chitosan addition. Compression and puncture forces were highly correlated with sensory parameters such as hardness and crispness, whereas cutting force was more correlated with toughness. From these results, it seems that the textural properties were improved by chitosan addition in both nonpreheated and preheated Korean radish. The preheating treatment was effective in the early stage of salting. However, combination of both treatments showed little effect during salting.

• Journal of the Korean Society of Costume
• /
• v.30
• /
• pp.261-274
• /
• 1996

In the present age dominate by both cer-taingty of 1% and uncertainty of 99% 'Fuzzy thinking' of Bart Kosko that is the way to solve the problems by the scientific way through a worldview of Buddhism or Taoism greatly prevails around the world over 'Lateral greatly prevails around the world over 'Lateral thinking' and the authenticity or the right and-wrong of the uncertainty which is the thinking way to find the answer of the problems of illogical way of Edward de Beno against the western vertical thinking were Concurrently fashion designers over the world also adopt the oriental elements. But there exist differences of thoughts between the orient and the occident. And they have dif-ferent thinking way of aestheticism and references of the value on the beauty. Not only beauty but the view through the mind as intuitional thought in which not only the rec-ognition of sense but also the rationalism and the naturalness play key role. The aesthetic sense in the orient contains both the truth and virtue. 2) The beauty of the mean It's from the thought of neutralization of Confucius. The mean or moderation state which in harmony with ethical virtue and aes-thetic beauty is the ideal and is the ultimate. Therefore the thought of Confucian is the creativity in which the balance and the har-mony is most important. Fashion design is also one of the representation of the mean because the spirit of the designer is harmonized for-mlessly with the object of the model of the fashion design. 2) The beauty of skillfulness It indicates the Taoism of Lao-tzu and Chuangtzu. It takes a super-artistic declar-ation that human can feel and recognize the color of colorlessness the sound of sound-lessness and the taste of tastelessness. The thought of arts affected by Taoism is 'ad-vanced age' called the beauty of skillfulness. The view of arts of lao-tzu takes the beauty of cosmos and the nature as a standard. Es-pecially the beauty of inactivity is recognized by the linkage between the beauty and the ugliness. And these things appear in fashion design as a design element such as humor or exaggeration. 3) The beauty of non-dualism It is thought of Buddhism that all evil passions of worry occur form the opposition in dualism. Finally this thought leads to that everything is consistent and truth is only one from the point of view that virtue and vice has on linkage that is 'no virtues no vices' and 'one with two, two, with one, one is not two' A big tendency like this became the root forma-tion of the thought of the oriental arts. 3. Characteristics of the oriental aesthetic sense on the present fashion design 1) The formation of the fashion design on the oriental elements In the picture-incantation which was a representation of an era when the thought of 'cosmic dual forces' dominated the basic polygons of 'a circle square triangle' means both 'one two three' and 'the negative positive mean' of cosmic elements. From this point of view the was of planner cutting in the Orient is dif-ferent from that of the Occidental which is in three-dimensional. The planner polygon type of the cut-pieces comes to have the meaning of the three-dimension when they consist of a suit that has the combination of each cut-piece. This shows the consistency with the principle of cosmos creation of Taoism that one is two two is three and three is every-thing. 2) The coloring and the symbolic represen-tation of the fashion design on the orien-tal elements The sense on the colors in the Orient from the thought of 'the cosmic dual forces and the five elements' is not the experi-enced from the knowledge but contains the consideration of philosophy Five-primary-color representing compass directions Blue(East) Red(South) Yellow(Center) White (West) and Black (North) is called ' the posi-tive' for this five-primary-color secondary-color which comes from the compound of the primary colors is called 'the negative' The thought of 'the cosmic dual forces and the five elements' is also an theory containing the natural order of the cos-mos and this shows the perceptional differ-ence that they are not conceptual but to be recognized and fell directly. A thought of Buddhism which is 'Colors are colorlessness and Clolorlessness are color's proves that. 3) The pattern and symbolic representation of the fashion design on the oriental elements The pattern as a visual style is a figure of symbolic representation which adopt the mental and physical world of human and are the compo-sition of artistic revelation of the human nature and the religous thought of incantation. Es-pecially the symbolic representation of the oriental thought of Confusion. Buddhism and Taoism There are patterns such as plants aminals the oriental four gods and geometry. From the above it's the time toward the 21'th century when the world is constructing one global area and one historical zone. And the exotic mood of the Orient represented in the fashion which doesn't make the common feeling in general does not cease to develop only to express the visual modeling but also adopts the thought religion and the art which are the root of the Orientail and contains inherent willing of modeling.

• Journal of the Korean Society of Food Culture
• /
• v.8 no.3
• /
• pp.267-274
• /
• 1993

This study was aimed to investigate the changes in textural properties of Korean radish and relevant chemical, enzymatic activities during salting. During salting, pH was decreased and total acidity was increased. The maximum compression and puncture forces of Korean radish were decreased significantly whereas cutting force was increased. From the force-distance curves, the break point and maximum force point disappeared in salted Korean radish whereas these appeared apparently in fresh one. Also, the number of peak obtained by three types of test from salted Korean radish was decreased. Hot water soluble pectin and 0.4% Na-hexametaphosphate soluble pectin were increased whereas 0.05 N-HCl soluble pectin were decreased significantly. Polygalacturonase activity were increased in Korean radish solid(RS) and Korean radish juice(RJ) until 4 days of salting. Pectin esterase activity were decreased in RS and RJ. Cx-cellulase activity did not appear initially, however, they began to show their activities after 2 days of salting and were increased in RJ although it was low.

• Journal of Bio-Environment Control
• /
• v.23 no.2
• /
• pp.123-130
• /
• 2014

Oriental melon (Cucumis melo var. makuwa) should be cultivated on the soil and be harvested. It is difficult to find because it is covered with leaves, and furthermore, it is very hard to grip it due to its climbing stems. This study developed and tested oriental melon harvesting robots such as an end-effector, manipulator and identification device. The end effector is divided into a gripper for harvest and a cutter for stems. In addition, it was designed to control the gripping and cutting forces so that the gripper could move four fingers at the same time and the cutter could move back and forth. The manipulator was designed to realize a 4-axis manipulator structure to combine orthogonal coordinate-type and shuttle-type manipulators with L-R type model to rotate based on the central axis. With regard to the identification device, oriental melon was identified using the primary identification global view camera device and secondary identification local view camera device and selected in the prediction of the sugar content or maturity. As a result of the performance test using this device, the average harvest time was 18.2 sec/ea, average pick-up rate was 91.4%, average damage rate was 8.2% and average sorting rate was 72.6%.