• Journal of Korean Foot and Ankle Society
• /
• v.14 no.1
• /
• pp.5-10
• /
• 2010

Purpose: This study was performed to compare the contact area between three different correcting angles after the proximal crescentic and Ludloff osteotomies of the first metatarsal. Materials and Methods: We used the two sawbone models. Proximal crescentic (PCO) and Ludloff osteotomies (LO) were performed and secured using K-wires under the correcting intermetatarsal angle (IMA) $5^{\circ}$, $10^{\circ}$, and $15^{\circ}$. Then each 6 osteotomized model was scanned five times and measured the contact area using the calculating program. We excluded the highest and lowest values. Results: The mean area of cutting surface was 189 $mm^2$ in PCO, 863 $mm^2$ in LO. The mean contact area (contact ratio; contact area $\times$100/area of cutting surface) of PCO was 149 $mm^2$ (79%) in $5^{\circ}$, 139.5 $mm^2$ (74%) in $10^{\circ}$, 107 $mm^2$ (57%) in $15^{\circ}$ IMA. The mean contact area (contact ratio) of LO was 711 $mm^2$ (82%) in $5^{\circ}$, 535.5 $mm^2$ (62%) in $10^{\circ}$, 330 $mm^2$ (38%) in $15^{\circ}$ IMA. Conclusion: A significant decrease in the contact area and contact ratio according to increase in correcting IMA was noticed in LO. We recommend the PCO rather than LO, when the IMA is needed to correct over $15^{\circ}$.

• Journal of Korean Society of Forest Science
• /
• v.104 no.4
• /
• pp.598-606
• /
• 2015

This study analyzed the characteristics of the disaster occurrence and disaster-prone zones on the 85 forest roads in the Jeollabuk-do area by referring to their forest environment factors. The on-site survey reveal the types of forest road disasters as follows: erosions of cutting slopes 54.1%, erosions of the filling slope 35.3%, collapses of cutting slopes with filling slope 9.4%, and erosions of road surface 1.1%. Disasters most frequently occurred in the vertical location (the hillside) and the horizontal location (the slope), and the forest factors affecting the road disasters were degree of cutting slopes in $31^{\circ}{\sim}40^{\circ}$, degree of filling slopes in $21^{\circ}{\sim}30^{\circ}$, and the soil texture of SiL. The most significant factors on the most frequent occurrence of forest road disasters were forest type of coniferous, slope aspect northeast, forest age of plantation and felling area, and rainfall in 1601~1700. An analysis of the occurrence of the forest road disasters in the Jeollabuk-do area showed a positive correlative relationship with the following factors of the forest environment within a 1% error: degree of cutting slope in $31^{\circ}{\sim}40^{\circ}$, annual accumulation rainfall in 1601~1700. and showed a positive correlative relationship with the following factors of the forest environment within a 5% error: horizontal location of valley, forest type of coniferous, length of slope more than 20 m, forest age of plantation and felling area, soil texture of SiL.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.13 no.2
• /
• pp.78-85
• /
• 1993

This experiment was carried out to select for the varieties with high environmental adaptability in mountainous pastures of Taekwalyong area, and the evaluation was based on the data of varietal differences of dry matter production and yield components in Tall fescue cutting at various developmental stages in growth period of autumn. The results were summarized as follows; 1. The varieties with high number of tillers per plant(NT) showed a high dry weight of plant(DW) in all autumn cuttings. These varieties(Barce1 and Fuego) may be more adaptable to mountainous pastures of Taekwalyon area than other varieties. 2. The number of tillers per plant(NT) was significantly positive correlated with dry weight of plant (DW), but dry weight of tiller(WT) was not significantly correlated with dry weight of plant(DW) in all autumn cuttings. 3. The multiple regression equations of autumn cutting stages with mean dry weight of plant(DW) and number of tillers per plant(NT) can be used to estimate the cutting time to obtain maximum mean dry weight of plant(DW) and the highest number of tillers per plant(NT). The maximum mean dry weight of plant(DW) and the highest number of tillers per plant(NT) was estimated at the time of 21 Oct. and 26 Oct, respectively. 4. Dead leaves tended to increase greatly after the 2nd cutting(l4 Oct.) in growth period of autumn. 5. The number of tillers per plant(NT) was an important yield component before tiller density achieved equilibrium, but dry weight of tiller(WT, including dead leaves) was of most significant as a yield determinant after maximum tiller density reached in growth period of autumn.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.13 no.4
• /
• pp.251-256
• /
• 1993

This experiments was carried out to evaluate the potential winter hardiness of tall fescue varieties based on the data of dry weight of plant per relative tiller appearance rates(DW/RTAR) in mountainous pastures of Taekwalyon area. The results obtained were as follows; 1. The varieties were classified into 2 groups by dry weight of plant per relative tiller appearance rates (DW/RTAR). Thus. Forager and Fuego belong to the group with more than 2.0 in DW/RTAR but Barcel, Barvetia, Demeter, Enforcer. Johnstone, Safe and Stef belong to the group with less than 2.0 in DW/RTAR respectively. 2. The dry weight of plant per relative tiller appearance rates(DM/RTAR) and dry weight of plant(DW) of 1st cutting were significantly positive correlated with number of heading tillers and dry weight of heading tillers. 3. The dry weight of plant per relative tiller appearance rates(DW/RTAR) was significantly positive correlated with dry weight of plant(DW) of final cutting and of 1st cutting. 4. The varieties with high DW/RTAR showed a high dry weight of plant(DW) of 1st cutting. Accordingly, it was concluded that DW/RTAR is a valuable character for evaluating potential winter hardiness of tall fescue on mountainous pastures of Taekwalyon area.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.2
• /
• pp.31-37
• /
• 2015

Recently, mobile phones have become necessary tools for everyday life. In this study, a device that can serve as a separation between a touch panel and an LCD module in a mobile phone was devised for mass repair processes at a smaill business. We used a wire cutting method to separate the bonding plate area between the modules. The device is composed of DC motors and stepping motors that can deliver a precise cutting motion. The motor control system is connected by individual control modules to a CAN network. The developed device showed excellent performance at high temperature conditions.

• The Korean Journal of Ceramics
• /
• v.3 no.2
• /
• pp.105-109
• /
• 1997

The effects of surface conditions of the C-2 cemented carbide substrate on the adhesion of diamond film were investigated. The substrates were pretreated for different times with Murakami's reagent and then the acid solution of an H2SO4-H2O2. The adhesion strength was estimated by a peeling area around the Rockwell-A indentation. The cutting performance of the diamond-coated tools was evaluated by measuring flank wears in dry turning of Al-17% Si alloy. The morphology of deposited diamond crystallites was dominated by (111) and (220) surfaces with a cubooctahedral shape. The diamond film quality was hardly affected by the surface conditions of the substrate. The variation of tool life with longer substrate etching times resulted from a compromies between the increase of film adhesion at the interface and the decrease of toughness at the substrate surface. The coated tools were mainly deteriorated by chipping and flaking of the diamond film form a lock of adhesion strength, differently from the wear phenomena of PCD tools.

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.1
• /
• pp.16-20
• /
• 2007

Although conventional contour parallel tool paths obtained from geometric information have successfully been used to produce desired shapes, they seldom consider physical process concerns such as cutting forces and chatter. In this paper, we introduce an optimized contour parallel path that maintains a constant material removal rate at all times. The optimized tool path is based on a conventional contour parallel tool path. Additional tool path segments are appended to the basic path to achieve constant cutting forces and to avoid chatter vibrations over the entire machining area. The algorithm was implemented for two-dimensional contiguous end milling operations with flat end mills, and cutting tests were conducted to verify the performance of the proposed method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.568-571
• /
• 2004

This paper presents an efficient 5-axis roughing method for centrifugal impeller. The efficient roughing is minimization of cutting time through minimizing tool tilting & rotating motions. Roughing tool path plan consists of the three steps. First, machining areas are divided into sub cutting regions using ruling lines. The biggest tool diameter is, then, determined for each region. Finally, tool paths are generated after fixing the tilting and rotating axis of 5-axis machine. Experimental results showed that the proposed roughing plan considering the divided machining regions is more efficient than the conventional methods.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.5
• /
• pp.117-127
• /
• 2004

A risk analysis on the cutting slope of roads near Cheongju area was carried out with the data from geological map, field investigation, and laboratory test and with the Geographic Information System. A risk analysis method on the cutting slope of road using the Geographic Information System was developed with the data from geological map, field investigation and laboratory tests. In the GIS, road factors which are safety factor, class of road, slake index, slope-protection works, and height of slope in the cutting slopes are classified into some ranks, and their weighting factors were taken into account. This method can be applied effectively to a road management.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.5
• /
• pp.8-12
• /
• 2012

Recently, a wide range of industrial production area has a competitive advantage through cost reduction. Moreover with the development of industrial technology, base material and cutting tool help the machining technology. But most of the machining enterprises have not hold the R&D facilities and human resources. This mainly disturbs the industrial development and th increase of production efficiency. Especially in the interrupted machining process, it showed different behavior with continuous machining process. So it needs to research and develop the tool life and tool wear mechanism analysis.