• KSBB Journal
• /
• v.31 no.1
• /
• pp.20-26
• /
• 2016

This study aims to examine the optimum blanching conditions as a pretreatment condition to improve the storage stability of Dolsan leaf mustard pickle. The effects of the blan- ching temperature and time were investigated at a temperature range of $80-100^{\circ}C$. Sampling was done for 1 month after a 5 days interval. The L value of the Dolsan leaf mustard was found to be the highest at $80^{\circ}C$. The cutting force increased as the blanching temperature increased. The tensile strength decreased at $95^{\circ}C$ and $100^{\circ}C$. In addition, the sensory evaluation scores were the best at $80^{\circ}C$. The storage stability was assessed at various blanching temperatures to increase the sinigrin content during storage. Liquid chromatography with photodiode array and tandem mass spectrometry (LC-PDA/MS/MS) analysis was conducted to identify and quantify the sinigrin content in the Dolsan leaf mustard. Sinigrin as an internal standard was co-injected into each sample solution. The sample was monitored by recording the ultraviolet absorbance at 228 nm and by electrospray ionization (ESI) positive ion mode in the m/z 50-1,500 range. Blanching the sample at $80^{\circ}C$ showed the highest sinigrin concentration during storage among various temperatures and the maximum concentration was 350 ppm at 15 days storage. Study on utilization of vegetable from food processing of leaf mustard and preservation conservation results suggest that blanching at $80^{\circ}C$ is expected to improve the palatability of the pickle.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.2
• /
• pp.12-20
• /
• 2011

Recently, construction site scale has been growing larger along with the growth of national economy. As construction market requires time reduction, cost saving, and improving quality, a cutting-edge technology applied research has been gradually studied for more efficient project management. In particular, the Real Time Location System (RTLS) technology, a real-time location tracking system of construction resources, can be effectively used in safety management. This technology has been studied and applied in various industries including architectural, marine, urban, and other industries. However, although tunnel construction in civil engineering has a narrow space and many safety risks, there are not researched about this content. Therefore, this study proposes an advanced safety management model for tunnel construction using the RTLS technology and a measurement method of the feasibility of this model in the construction site.

• Journal of Information Processing Systems
• /
• v.8 no.3
• /
• pp.409-420
• /
• 2012

The decision-making by agents in games is commonly based on reinforcement learning. To improve the quality of agents, it is necessary to solve the problems of the time and state space that are required for learning. Such problems can be solved by Macro-Actions, which are defined and executed by a sequence of primitive actions. In this line of research, the learning time is reduced by cutting down the number of policy decisions by agents. Macro-Actions were originally defined as combinations of the same primitive actions. Based on studies that showed the generation of Macro-Actions by learning, Macro-Actions are now thought to consist of diverse kinds of primitive actions. However an enormous amount of learning time and state space are required to generate Macro-Actions. To resolve these issues, we can apply insights from studies on the learning of tasks through Programming by Demonstration (PbD) to generate Macro-Actions that reduce the learning time and state space. In this paper, we propose a method to define and execute Macro-Actions. Macro-Actions are learned from a human subject via PbD and a policy is learned by reinforcement learning. In an experiment, the proposed method was applied to a car simulation to verify the scalability of the proposed method. Data was collected from the driving control of a human subject, and then the Macro-Actions that are required for running a car were generated. Furthermore, the policy that is necessary for driving on a track was learned. The acquisition of Macro-Actions by PbD reduced the driving time by about 16% compared to the case in which Macro-Actions were directly defined by a human subject. In addition, the learning time was also reduced by a faster convergence of the optimum policies.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.1
• /
• pp.72-81
• /
• 2009

This paper presents quasi-resonant type high power factor ac power supply for atmospheric pressure plasma cleaning system adopting three phase PFC boost converter and it's control method. The presented ac power supply consists of single phase H-bridge inverter, step-up transformer for generating high voltage and three phase PFC boost converter for high power factor on source utility. Unlikely to the traditional LC resonant converter, the propose one has an inductor inside only. A single resonant takes place through the inside inductor and the capacitor from the plasma load modeled into two series capacitor and one resistance. The quasi-resonant can be achieved by cutting the switching signal when the load current decrease to zero. To obtain power control ability, the propose converter controlled by two control schemes. One is the changing output pulse period scheme in the manner of PFM(Pulse Frequency Modulation) control. On the other, to provide more higher power to load, the DC rail voltage is directly controlled by the 3-phase PFC boost converter. The significant merits of the proposed converter are the uniform power providing capability for high quality plasma generation and low reactive power in AC and DC side. The proposed work is verified through digital simulation and experimental implementation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.12
• /
• pp.1905-1912
• /
• 2017

In recent years, Ulaanbaatar, a capital of Mongolia has witnessed major problem that air quality reaches hazardous level during the winter season. Coal combustion for heating of every house in "Ger" district is main reason. One way to reduce the air pollution is mass usage of electric heater. However, there are several difficulties such as overload and degradation of transformers and other equipment used in distribution and transmission systems as well as power shortage occurrence in evening peak period due to residential consumption. This study aims to contribute for solving the air pollution and power shortage problem in Mongolia. One possible solution could be distributed generation (DG) with photovoltaic (PV) penetration. In this study, PV with energy storage (ES) hybrid system to reduce peak load is analyzed. We proposed the suitable structure of PV-ES hybrid for Mongolian household, and suggested several operation scenarios. Optimal operation algorithm is carried out based on a comparison aspect from economical, grid impact and PV penetration possibility. The economic analyse shows annual income of 520USD, and has a payback period of 8 years for selected scenario. The proposed PV-ES system structure is verified by experimentation set on the building rooftop in city center. The suggested scenario is planned to apply for system in further research.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.8 s.185
• /
• pp.171-177
• /
• 2006

This study was performed as a part of the research on the development of a maskless and electroless process for fabricating metal micro/nanostructures by using a nanoindenter and an electroless deposition technique. $2-{\mu}m$-deep indentation tests on Ni and Cu samples were performed. The elastic recovery of the Ni and Cu was 9.30% and 9.53% of the maximum penetration depth, respectively. The hardness and the elastic modulus were 1.56 GPa and 120 GPa for Ni and 1.51 GPa and 104 GPa for Cu. The effect of single-point diamond machining conditions such as the Berkovich tip orientation (0, 45, and $90^{\circ}$ ) and the normal load (0.1, 0.3, 0.5, 1, 3, and 5 mN), on both the deformation behavior and the morphology of cutting traces (such as width and depth) was investigated by constant-load scratch tests. The tip orientation had a significant influence on the coefficient of friction, which varied from 0.52-0.66 for Ni and from 0.46- 0.61 for Cu. The crisscross-pattern sample showed that the tip orientation strongly affects the surface quality of the machined are a during scratching. A selective deposition of Cu at the pit-like defect on a p-type Si(111) surface was also investigated. Preferential deposition of the Cu occurred at the surface defect sites of silicon wafers, indicating that those defect sites act as active sites for the deposition reaction. The shape of the Cu-deposited area was almost the same as that of the residual stress field.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2009.04a
• /
• pp.82-92
• /
• 2009

This study analyzed the present operation state and cases of safety accidents of inflammables and explosives in army camps by focusing on staffs in charge for safety supervision of inflammables and explosives in army camps. Moreover, through this analysis, the study surveyed the actual safety supervision conditions in a workplace related to the hazardous materials, the safety plan for inflammables and explosives, the quality of education for safety supervision, the consciousness of safety supervisors for the safety supervision of inflammables and explosives, and so on. On basis of this research, the actual conditions of inflammables and explosives in army camps were investigated. By not only establishing the systematic safety plan but also developing the safety supervision education programs to manage inflammables and explosives in army camps safely, this study tries to arouse military officers' interest and ensure a safe workplace. Furthermore, this study presents public relations and revitalization of the education to make safety supervisors for inflammables and explosives and the interested parties recognize the hazards of safety accidents, by cutting them off from safety accidents in advance.

• Food Engineering Progress
• /
• v.14 no.4
• /
• pp.316-321
• /
• 2010

The efficacy of the ozonated water (0.1, 0.2, 0.4, 0.6, and 1.0 ppm) in reducing the risk of food-borne disease was investigated in this study. After inoculation of Listeria monocytogenes (ATCC 19112), Salmonella enterica subsp. enterica biovar Typhimurium (ATCC 12598), Escherichia coli O157:H7 (ATCC 43890) to lettuce, spinach, and beef, inhibition effect with different washing concentrations, time, and methods with ozonated and tap water were evaluated. As a result, there were 2.16 to 3.85 log CFU/mL reduction in different foods and 7 log CFU/mL reduction on cutting boards after watering with ozonated water. Higher than 0.2 ppm of ozonated water treatment reduced the growth of food-borne disease bacteria with increasing washing time and ozone concentration. These results suggested that the ozonated water treatment effectively improved the microbiological quality and food safety.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.54 no.1
• /
• pp.1-8
• /
• 2021

In order to develop value-added low-salt fermented seafood with a long shelf-life, we prepared seasoned low-salt fermented Mideoduck (Styela clava) supplemented with fermentation alcohol (SME). The SME was produced by washing and dewatering shelled Mideoduck, followed by cutting and salting for 24 h at 0℃. The salted Mideoduck was seasoned and fermented with ingredients, including garlic, ginger, monosodium glutamate, red pepper, sesame, sorbitol and sugar, for 7-8 days at 0℃. After adding 3-5% fermentation alcohol, the Mideoduck was packed in a polyester container. The salinity, volatile basic nitrogen, and amino nitrogen content of the SME was 4.5%, 20.9 mg/100 g and 92.0 mg/100 g, respectively. In comparison with the control, the addition of 3-5% fermentation alcohol showed inhibitory effects of decreased freshness, texture degradation, and growth of residual bacteria. Additionally, the SME had good storage stability and organoleptic qualities when stored at 4±1℃ for 40 days. Therefore, it is suitable for commercialization as a seasoned low-salt fermented product with a long shelf-life. The total amino acid content of the SME was 11,774.5 mg/100 g, majorly comprising glutamic acid, aspartic acid, lysine, arginine, and leucine, and the free amino acid content was 506.4 mg/100 g, majorly comprising hydroxyproline, taurine, and glutamic acid.

• Design & Manufacturing
• /
• v.15 no.2
• /
• pp.42-48
• /
• 2021

In this paper, when manufacturing large/multi-mold parts (more than 30 core parts),A mold manufacturing (tolerance) management system was established through design-processing linkage.The mold manufacturing (tolerance) management system is a design-based measurement shape/measurement position determination system, M/C processing-linked measurement drive system,It is composed of four parts: CAD-linked measurement result analysis system and manager mold part quality management system.In addition, the constructed system was applied to the field and the effect of system construction was evaluated by comparing it with the existing process.As a result of the evaluation, the measurement precision is within 0.02mm, and the time it takes to measure after the end of processing is shorter than that of the existing process.(12 hours → 2 hours) It was shortened to 16.7%.In addition, it was confirmed that the time required for reprocessing after measurement was reduced by 25% (4 hours → 1 hour) compared to the existing process.