• Journal of the Korean Society for Precision Engineering
• /
• v.6 no.2
• /
• pp.40-46
• /
• 1989

Recently, the researches on cutting the new material have been done for development of aerospace industrial engineering. Especially, titanium ally is well known as heat resisting, antiwear, anticorrosion and difficult-to-machine materials. Many studies on the analysis of shear angle have been done for improving productivity in cutting these materials. In case of titanium alloy, the saw-toothed type of chip which has wave surface of a triangular form, an eccentric from of a continuous type of chip that is produced in the cutting process, was checked. Nakayama supposed that a maximum shear strewss plane and the shear crack in the free surface made an angle of $45^{\circ}$ .deg. , but it's usually much larger than that. In this paper, the author analyzed the shear conditions of the cutting process in the quick-stopping device with the help SEM-photographs, and measured the hypotenuse angle directly in the photographs of the chips. In conclusion, the author tried to find the shear angle in the cutting process with the saw-toothed chip and compared it with the shear angles which can be calculated from the theories established by others. The results obtained are as follows. 1. In case of the saw-toothed chips, the equivalent cutting ratio can be calculated by using the chip thickness to two-thirds of ramp height. 2. The theory of Ernst-Merchant is not applicable to the titanium and its alloys which does not fractured in accordance with the theory of maximum shear stress. 3. When we cut the titanium alloys which produced the saw-toothed chips, the shear angle can be found with the theories of Rowe-Spick, P.K. Wright and the measurement of hypotenuse angle.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.8
• /
• pp.46-59
• /
• 1998

This paper presents shape design, surface construction, and cutting path generation for the surface of marine ship propeller blades. A propeller blade should be designed to satisfy performance constraints that include operational speed which impacts rotations per minutes, stresses related to deliverable horst power, and the major length of the marine ship which impacts the blade size and shape characteristics. Primary decision variables that affect efficiency in the design of a marine ship propeller blade are the blade diameter and the expanded area ratio. The blade design resulting from these performance constraints typically consists of sculptured surfaces requiring four or five axis contoured machining. In this approach a standard blade geometry description consisting of blade sections with offset nominal points recorded in an offset table is used. From this table the composite Bezier surface geometry of the blade is created. The control vertices of the Hazier surface patches are determined using a chord length fitting procedure from tile offset table data. Cutter contact points and path intervals are calculated to minimize travel distance and production time while maintaining a cusp height within tolerance limits. Long path intervals typically generate short tool paths at the expense of increased however cusp height. Likewise, a minimal tool path results in a shorter production time. Cutting errors including gouging and under-cut, which are common errors in machining sculptured surfaces, are also identified for both convex and concave surfaces. Propeller blade geometry is conducive to gouging. The result is a minimal error free cutting path for machining propeller blades for marine ships.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.14 no.2
• /
• pp.120-124
• /
• 1994

Browse from oriental white oak(Quercus aliena Blume) was analysed for nutritive value and biomass estimation. The content of cmde protein was high on August and September. NDF, ADF and lignin contents were increased with progressing the seasons but IVDMD, TDN, DE and ME levels were not different from the variation of seasons. Tannin content was high on May and June. Basal stem diameter $\times$ height of tress was highly correlated with browse dry weights(r=0.80**) and the linear regression equation are the follows; Y = 8.23 + O.57X(Y = browse dry weight(g), X= basal stem diameter $\times$ height(cm)). Using the traditional cutting method, the amounts of browse was determined as 823 g dry weight per tree, while the new method by the above equation gave a similar results, i. e., 793 g dry weight per tree. The possibility of browse biomass estimation of oriental white oak by the basal stem diameter $\times$ height index was found.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.4
• /
• pp.431-435
• /
• 2015

Rice (Oryza sativa L.) ratooning is the production of a second rice crop from the stubble left behind after the main crop harvest. The objectives of this study were to evaluate the effects of main-crop stubble height, irrigation and fertilization on ratoon grain yield. Main crop 'Jinbuol' rice cultivar was harvested to leave with 10, 20, 30, or 40 cm stubble height. When the main crop stubble was harvested with 10 cm height, ratoon rice grain yield was increased by 2,810 kg/ha. Irrigation on stubbles after main crop harvest did not affect the ratoon crop yield and rice quality. The results showed a large variation in the ratoon performance by fertilizer application methods. Top-dressed nitrogen fertilizer on the stubble after harvest caused increase in panicle production and higher maturity rate. However, there was no significant difference in protein content, amylose content of milled rice and cooked rice characters between plots managed with and without nitrogen fertilizer.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.18 no.3
• /
• pp.179-186
• /
• 1998

This experiment was conducted to study on forage utility of Diplachne fusca L. which live in reclaimed saline land of midwest region of Korea The secondary experiment was conducted to know on growth characteristics, forage yield and forage value of Diplachne fusca L. in order to get a necessary data on possible utilization of native plant as a forage crop and practical use of reclaimed saline land. The results obtained are summarized as follows; 1. The growth of Diplachne fusca L. was neary finished at heading stage. So plant height, leaf length, leaf width, stem diameter, tillering number, fresh weight and dry weight per plant were 137.5cm, 42.6cm, 4.65mm, 2.48mm, 15.3 tiller, 44.68 and 15.3g respectively. 2. Fresh weight was the highest with 4,460kg/10a at heading stage, dry weight was 1,530kg/10a at heading stage and 1,630kg/10a at 20 day after heading. The fresh weight was significantly difference between cutting height level according to cutting time, but total fresh weight was not significantly difference between cutting height level. Total dry weight was significantly difference between cutting height, so it was a large yield at cutting height of 10cm. 3. The contents of crude protein, available protein, digestible protein and TDN were the range of 12.3~3.7%, 12.3~3.7% 10.8~3.6% and 65.2~60.7% according to growth stage, respectively. The highest yield of crude protein, available protein, and digestible protein were showed at heading stage, that of TDN showed at 20 day after heading. The contents of ADF and NDF were the range of 36.4~50.0% and 62.7-80.5% according to growth stage. 4. The contents of P, Ca, K and Mg were the range of 0.31~0.20, 0.70~0.52, 1.74~1.28 and 0.19~0.18% according to growth stage, respectively. The highest yield of P, Ca and K was showed at heading stage, that of Mg showed at 20 day after heading. 5. The contents of ENE, NEL, NEM and NEG were the range of 1.42~1.29, 0.68~0.62, 0.68~0.61 and 0.40~0.35 McaVlb according to growth stage, respectively. The highest yield of ENE, NEL, NEM and NEG was showed at 20 day after heading by inuease after heading. 6. The grasseating ratio of Diplachne fusca L. of before and after heading by milk cattle was 96.5% and 95.3%, respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.2
• /
• pp.192-197
• /
• 2012

The competition between green manure and forage crops frequently occurred at agricultural field because of soil fertility and livestock feeding selection. These experiments were carried out to evaluate the effects shoot and residue for green manure and forage production by leguminous crops and barley mixtures at paddy. Field experiments were conducted at paddy soil from 2008 to 2009. Treatments consisted of mixture and inter-seeding of barley and leguminous crops (hairy vetch and crimson clover). These treatments were divided into cutting height of 8 and 25 cm for using of green manure and forage at once. The residue biomass of 25 cm cutting height was higher than 8 cm and were no significantly between mixture and inter-seeding. However, residues of legume crop were significantly higher at inter-seeding than mixture. The shoot biomass of 8 cm cutting height was higher than 25 cm for forage using. The production of legume crop was high at the barley and hairy vetch seeding plot. The mixture of hairy vetch and barley showed the best biomass of shoot and residue for green manure and forage using at 25 cm of cutting height. Also this treatment could be possible to rice cultivation by no fertilization. Therefore, we suggested that 25 cm cutting of hairy vetch and barley mixture could be used for green manure and forage at the same time under rice-based cropping system.

• Korean Journal of Plant Resources
• /
• v.10 no.1
• /
• pp.45-49
• /
• 1997

This experiment was carried out to know the effects of aerial part cutting on the growth and root yield of Achyranthes japonica. The various cutting treatments were tested. Cutting treaments were 20cm and 30cm cutting from the apical part of plant, when plant height was 30cm and 50cm, respectively. The seed amount was the largest at non-cutting, indication that cutting treatment inhibits fruiting. The most effective treatment for the root growth was 30cm cutting just before flowering time. Cutting just before flowering time increased root diameter, length and root weight comparing with non-cutting.

• Korean Journal of Medicinal Crop Science
• /
• v.4 no.3
• /
• pp.241-246
• /
• 1996

This Experiment was conducted to know effect of cutting times and nitrogen split application rates on shoot and root-related characters of Atractylodes japonica. The cutting time was forced on none, once and twice along with three levels of nitrogen split application, all basic 50 -30 -20% and 40 -30 -30%. The plant height declined with increased cutting time and dry matter weight was increased with nitrogen split application under none and once cutting. Average yield of cutted shoot as edible wild plant was 257kg/10a at once cutting condition, but twice cutting condition was little and unfavorable to use edible wild plant because shoot was coarse. Yield 0 dry rhizome was the highest at once shoot cutting und­er 50 -30 -20% nitrogen split application by 471kg/10a.Especially, culture of Atractylodes japonka needed once shoot cutting one the 10th-30th of May.

• Korean Journal of Plant Resources
• /
• v.23 no.4
• /
• pp.368-373
• /
• 2010

Juniperus chinensis var. sargentii Henry is a short and creeping evergreen shrub which reaches about 60 cm in height and only occurs in the northeast Asia and in the top of high mountains over the Korea. The Korea Forest Service protects it strictly by law since J. chinensis var. sargentii is an eccentric plant and possibly may be exterminated soon in Korea. This study was carried out to develop the propagation technique by cutting for conservation of genetic resources of J. chinensis var. sargentii. The rooting responses of branch cuttings, obtained from hard(May) and semi-hard wood shoots (August) to four growth regulators, namely, IAA, IBA, NAA and Rooton(exceptionally powder method) applied at various concentrations(0, 100, 200, 500, 1000 and 2000 $mgL^{-1}$) were examined in mixed soil media. Rooting rate showed significant difference between cutting times, among kinds and among concentrations of growth regulators. The optimum cutting time was April to May in hardwood cutting. The application of IBA 1000 $mgL^{-1}$(rooting rate : 36.4%) was most effective in callus formation and rooting of cutting. Relatively, rooting of cutting of the control taken in May was 30.4%. Root characteristics such as number, length and diameter of root were not significantly affected by kinds and concentrations of growth regulators in hardwood cutting.

• The Journal of Engineering Geology
• /
• v.17 no.4
• /
• pp.577-587
• /
• 2007

The length of study area was about 450m, and it was shown the geological condition of distinguished change of rock by cutting slope. In order to establish a slope stability, we carried out an engineering geological investigations about rock constituent, rock structure and a direction of discontinuous plane. The study area was divided into six section considered by direction of cutting slope, height of slope and geological condition. Analysis of cutting slope stability was carried out with stereo-graphic projection method by DIPS program which was feasible of stability analysis with geometrical correlation for a direction of discontinuous plane and direction of cutting slope. From analysis of cutting slope stability considered by construction, stability and economical efficiency, the slope stability countermeasures such as a high tensile wire net, slope protection method and enhanced retaining wall were established and operated which minimized effect caused by lower end of road on a relaxation of huge rock.