• Journal of the Korean Wood Science and Technology
• /
• v.18 no.4
• /
• pp.65-78
• /
• 1990

For the purpose of Improving the sounding boards for the conventional GAYAKUM, I was making approximately 202 specimens of radial board, 371 specimens of tangential board by cutting along the grain and the part of stem and 31 specimens of the disjointed traditional GAYAKUM made in Paulownia coreana. And it was conducted to measure specific gravity, dynamic Young's modulus, internal friction, resonant frequency, velosity of sound and width of annual ring by the method of the frexural vibration in a free-free bar in the audio frequency range. And it confirmed the juvenile wood by measuring wood fiber length of specimens. It was also conducted to investigate dynamic properties and moisture absorption by various heat-treatment and to test dynamic Young's modulus and internal friction for the disjointed conventional GAYAKUM. The results obtained were summarized as follow: 1. The Juvenile wood is located within about 7 annual rings from the pith in Paulownia coreana. 2. As increased with the specific gravity, the dynamic Young's modulus had more and more increased, but the internal friction had slightly decreased. 3. I think that radial board would be good for sounding board wood. because radial board is higher than tangential board in dynamic Young's mudulus and internal friction is lower than tangential board. 4. The value of mean dynamic Young's modulus on the conventional GAYAKUM, radial board and tangential board of 604 samples is $0.4283\pm0.037(\times10^{11}dyne/cm^2)$, $0.4316\pm(\times10^{11}dyne/cm^2)$ and $0.4234\pm0.112(\times10^{11}dyne/cm^2)$ respectively. The value of the radial board showed little higher than that of conventional GAYAKUM, but It had a similar tendency between conventional GAYAKUM and tangential board. 5. The annual ring width by four aspect is more narrow in north and west than that of others. 6. The values of specific gravity and dynamic Young's modulus in the mature wood showed higher than those of juvenile wood. 7. As the grain angle in the butt wood more increased to bark from pith, the dynamic Young's modulus were low. Then it was not good for sounding board. 8. It appeared that the heat-treatment for sounding board wood had a more effect to do the treatment of hotiron on surface after heat-treatment during 24 hours in $60^{\circ}C$ temperature. 9. As increased with the temperature, the rate of moisture absorption of heat-treatment wood had decreased. In conclusion, I thought that the sounding board wood for GAYAKUM would had the most effect to do the treatment of hotiron on surface after heat-treatment during 24 hours in $60^{\circ}C$ temperature using the radial board of mature wood.

• Journal of Plant Biotechnology
• /
• v.30 no.4
• /
• pp.375-380
• /
• 2003

This study was conducted to establish a practical masspropagation system of Phalaenopsis clones from basal shoot segments. The frequency of PLB (protocorm like body) induction was compared with various explants. Basal shoot segments showed the most successful result of 45％, while root tips, stalk node segments, stalk leaves and mature leaves represented low frequency (below 5％). The PLB induction ratio in the culture of basal shoot segments was examined with 11 different Phalaenopsis varieties, and the majority of varieties, including pink flower lines, showed an about 30％ rate of PLB formation. Especially, when whole basal shoot parts without cutting were inoculated onto PLB induction medium, giant PLB was induced from explant. This giant PLB was green color and big in size compared with normal PLB. When dissected giant PLB segments inoculated onto PLB multiplication medium, only normal size of PLBs were induced from them. PLBs induced by basal shoot culture were transferred onto proliferation medium and then shooting medium, from which normal plants were formed. Therefore, this culture method is considered as effective and practical protocol for Phalaenopsis mericlone production. In addition, it is suggested that clones of an infinite number can be produced consecutively by this culture system through repeated cycles of PLB induction and proliferation using the basal shoot segment of flask plant.

• Journal of Preventive Medicine and Public Health
• /
• v.30 no.2 s.57
• /
• pp.381-391
• /
• 1997

In an epidemiological study of metal workers exposed to metalworking fluids (MWF), the prevalence time of Evolution, seasonal occurrence and clinical type of contact dermatitis were investigated. Compostional analysis of MWF with HPLC, dermatological examination and two consecutive questionnaire surveys were conducted. Study population was divided into two groups ; workers contact to cutting oil and workers contact to rust preventive oil. In the analysis of MWF, aliphatic hydrocarbons, having 12-20 carbons, was most common composition(49.04%) of cutting oil otherwise, major contents (90.99%) of the rust preventives oil were aliphatic hydrocarbons composed of 6-9 carbons. The frequency (point prevalence) of contact dermatitis(CD) was 7(12.7 per 100 subjects) in the dermatological examination of 55 workers. As the result of second survey for contact dermatitis, cumulative prevalence of oil working full-time and recent 1 year prevalence in two groups were 28.0, 16.7 and 15.1, 12.5 per 100 subjects. There were no difference in the prevalence of CD by oil, age, oil contact duration. Summer is the most common evolution season in workers exposed to cutting oil, but not in workers exposed to rust preventive oil. Major clinical type of CD was erythematous papules in both groups. It presents the importance of preventive measures that 51.1% suffer from contact dermatitis had medical care at their own expense, and 47.1% of them felt serious about their contact dermatitis. From the fact that 68.6% think cotton gloves protective apparatus, we emphasize the need for health education.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.28 no.2
• /
• pp.435-459
• /
• 1998

In order to achieve a successful endodontic treatment, root canals must be obturated three-dimensionally without causing any damage to apical tissues. Accurate length determination of the root canal is critical in this case. For this reason, I've used the conventional periapical radiography, Digora/sup (R)/(digital imaging system) and Root ZX/sup (R)/(the frequency dependent type apex locator) to measure the length of the canal and compare it with the true length obtained by cutting the tooth in half and measuring the length between the occlusal surface and the apical foramen. From the information obtained by these measurements, I was able to evaluate the accuracy and clinical usefulness of each systems. whether the thickness of files used in endodontic therapy has any effect on the measuring systems was also evaluated in an effort to simplify the treatment planning phase of endodontic treatment. 29 canals of 29 sound premolars were measured with #15, #20, #25 files by 3 different dentists each using the periapical radiography. Digora/sup (R)/ and Root ZX/sup (R)/. The measurements were then compared with the true length. The results were as follows: 1. In comparing mean discrepancies between measurements obtained by using periapical radiography(mean error: -0.449±0.444 mm), Digora/sup (R)/(mean error: -0.417±0.415 mm) and Root ZX/sup (R)/(mean error: 0.123±0.458 mm) with true length. periapical radiography and Digora/sup (R)/ system had statistically significant differences(p<0.05) in most cases while Root ZX/sup (R)/ showed none(p>0.05). 2. By subtracting values obtained by using periapical radiography, Digora/sup (R)/ and Root ZX/sup (R)/ from the true length and making a distribution table of their absolute values. the following analysis was possible. In the case of periapical film. 140 out of 261<53.6％) were clinically acceptable satisfying the margin of error of less than 0.5 mm. 151 out of 261 (53,6％) were acceptable in the Digora/sup (R)/ system while Root ZX/sup (R)/ had 197 out of 261(75.5％) within the limits of 0.5mm margin of error. 3. In determining whether the thickness of files has any effect on measuring methoths, no statistically significant differences were found(p>0.05). 4. In comparing data obtained from these methods in order to evaluate the difference among measuring methods, there was no statistically significant difference between periapical radiography and Digora/sup (R)/ system(p>0.05), but there was statistically significant difference between Root ZX/sup (R)/ and periapical radiography(p<0.05). Also there was statistically significant difference between Root ZX/sup (R)/ and Digora/sup (R)/ system(p<0.05). In conclusion, Root ZX/sup (R)/ was more accurate when compared with the Digora/sup (R)/ system and periapical radiography and seems to be more effective clinically in determining root canal length. But Root ZX/sup (R)/ has its limits in determining root morphology and number of roots and its accuracy becomes questionable when apical foramen is open due to unknown reasons. Therefore the combined use of Root ZX/sup (R)/ and the periapical radiography are mandatory. Digora/sup (R)/ system seems to be more effective when periapical radiographs are needed in a short period of time because of its short processing time and less exposure.

• Culinary science and hospitality research
• /
• v.17 no.3
• /
• pp.204-220
• /
• 2011

of the recipes and 'stir frying' in 76.8% of the recipes. Other cooking methods were used as follows; 'blanching'(24.2%), 'roasting'(22.6%), 'pan frying'(21.0%), 'deep fat frying'(18.7%), etc. The use of 'Boiling' increased significantly(p=0.044) from 4.5% in 2008 to 10.0% in 2010 while the use of 'deep fat frying' decreased significantly(p=0.027) from 21.8% to 10.9%. The frequency of using cooking tools was as follows; knives and cutting boards(100.0%), dishes(92.9%), frypans(91.3%), chopsticks(40.3%), spoons(38.7%), etc. The foods used in cooking were as follows; rice(100.0%), carrots(67.1%), onions(61.9%), eggs(41.6%), paprika(27.7%), kimchi(25.2%), pizza-cheese(22.9%), etc. Natural and processed foods were used in cooking as the ratio of 80:20 approximately. Of the 5 food groups, 'meat fish egg bean' decreased from $24.44{\pm}13.27%$ in 2008 to $20.84{\pm}10.59%$ in 2010, but 'vegetables' increased from $44.38{\pm}15.65%$ to $50.64{\pm}14.07%$ significantly(p<0.05). In conclusion, 5th and 6th graders had an ability to select various foods for their health when cooking even if they have some foods they don't like while they lacked cooking skills such as using various cutting methods and proper cooking tools.

• Korean Journal of Environment and Ecology
• /
• v.17 no.2
• /
• pp.144-152
• /
• 2003

The purpose of this study was to investigate the effects of lime fertilization and light intensity on beech regeneration strategy in a mature beech forest(ca. 150 years old) gaps, which was located in the soiling areas Germany, where the soil is an acid brown earth. For the experiment canopy gaps of 30m diameter were cut, and one canopy gap remained as untreated while the other was limed(3t dolomite h $a^{-1}$). Soil chemistry, soil water potential, light intensity(PAR), ground vegetation, beech seedlings and mycorrhiza were investigated along transect from the stands into gaps to the north. The results of this study are followings: 1) In the limed gap, soil chemistry was greatly improved and a vigorous herb layer developed as compared to the unlimed gap. 2) Development and growth of the beech seedlings in the unlimed gap were generally deficient. Specially, developments of lateral roots were very lack. 3) Through the lime fertilization, the minerals contents of beech leaves such as calcium(Ca) and magnesium(Mg) were increased, while manganese(Mn) was decreased. There was antagonism between potassium(K) and calcium(Ca) or magnesium(Mg). 4) The relative mycorrhiza frequency(RM) in beech seedlings of the southern edge was very higher than that of the middle part, and through the lime fertilization extension of the species Laccaria amethystina appeared clearly. The results of this study showed that lime fertilize in forest, where the soil is acid, will be necessary..

• Journal of dental hygiene science
• /
• v.15 no.5
• /
• pp.603-611
• /
• 2015

This research is aimed at cutting off hearing loss and other harmful factors due to noise and providing basic material for noise reduction plan. As the research method, this research assessed noise by measuring acoustic pressure level and frequency in various situation of non-treatment and treatment. As the measurement result, average noise degree of high speed handpiece of non-treatment, ultrasonic waves scaler, and low speed handpiece showed 58~66 dB(A). Average noise degree of scaling of treatment, tooth elimination, and denture adjust showed 73~81 dB(A). The result is inferior to recognized standards of noise induced hearing loss. But the result of assessing this with (noise rating) NR curve was NR-73~78, which exceeded general workplace noise standard. This level can cause hearing loss when exposed to a long time. Therefore, treatment office noise during dental treatment can cause psychological and physical damage in dental clinic employees, and it is urgently required to establish systematic and active noise reduction plan.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.26 no.4
• /
• pp.221-226
• /
• 2006

This study was conducted to investigate the effect of tall type mixtures and turf type mixtures on dry matter yield, botanical composition and quality. The experimental design includes two mixture types : Tall type mixtures; orchardgrass (Potomac) 50+tall fescue (Fawn) 20+ Kentucky bluegrass (Kenblue) 10+red clover (Kenland) 20%) and turf type mixtures; Kentucky bluegrass(Newport) 60%+tall fescue (reboil Jr.) 20+perennial ryegrass (palmer II) 20%. The DM yield was higher obtained in tall type mixture than that of turf type mixture (p<0.05). In the chemical composition, Turf type mixture was higher in crude protein (CP) and dry matter digestibility (DMD), but lower in fibrous compound as NDF, ADF, cellulose and lignin than those of tall type mixture (p<0.05). The crude protein dry matter (CPDM) and digestible dry matter (DDM) yield was higher in tall type mixture than turf type mixture (p<0.05). In this experiment, nutritive value of turf type mixture was higher than that of tall type mixture, but CPDM and DDM yield of turf type mixture were lower than that of turf type mixture due to low dry matter yield. On the other hand, turf type mixture was obtained high feed value, and maintaining the various botanical composition on the 13 th cutting frequency condition. therefore, turf type mixture had a utilization possibility under grazing livestock as sheep and milk goats.

• Journal of Korean Home Economics Education Association
• /
• v.9 no.1
• /
• pp.1-17
• /
• 1997

This study was conducted to obtain basic materials to improve the teaching method of Home Economics by theoretically looking into the supplementary teaching materials or implements usable in teaching Costume History area. And based on these data, the types and the applications of the supplementary teaching materials or implements highschool owned were examined. The subjects of this study were 111 Home Economics and Housework curriculum highschool teachers who give a lecture in the country by using self-administered questionnaires. SAS program was used to calculate frequency, percentage, average, standard deviation, and $\chi$(sup)2-test analysis. The results of the study were as follows； 1. Most of the highschool teachers used the school expenses for experiments in preparing the supplementary teaching materials or implements. 2. Of the supplementary teaching materials and implements concerning Costume History, visual implements such as slides and pictures were the mostly owned. CD and audio implements as cassette-tapes were not used. 3. Most of the teachers recognized the importance of the audio-visual teaching materials and implements concerning Costume History. 4. Among the audio-visual materials and implements concerning Costume History by which can be made by school teachers of Home Economics and Housework curriculum, the mostly used one was ‘cutting pictorials from magazines and newspapers’, and the next were ‘orbital materials’, and ‘copy the pictorials’, and the least was ‘recording from the radio’. 5. Most of the annual expenses assigned to the department of Home Economics was used in cooking practice, and the least of the expenses was assigned in buying audio-visual teaching materials and implements. 6. Time assigned to the area of Home Economics was for the most part one or two hours per week, and among this, time assigned to the history of western costume and the history ok korean costume was for the most part five to eight hours. 7. The areas that the highschool teachers felt difficulties mostly during clothing and textiles curriculum were ‘textiles’and the next were ‘knitting’, ‘western costume history’, and ‘korean clothing construction’. 8. The difficulties the highschool teachers faced while teaching Costume History were mostly that ‘the pictorials in the text is not fully explainable’, the next were ‘most of the supplementary teaching materials or implements are not owned’, ‘have to explain very much in a short time’, and ‘the lectural explanation is insufficient’. 9. The solution for the difficulties that the highschool teachers faced while teaching Costume History was mostly ‘the information, on which audio-visual materials and implements are distributed in the market, should be easy to obtain’, the next opinions were ‘the school should provide enough experiment and practice expenses to buy audio-visual materials and implements’, and ‘education facilities of the Home Economics Department should be the main aspects in improving the teaching methods and should give special lectures about it’.

• Journal of Plant Biotechnology
• /
• v.1 no.1
• /
• pp.1-7
• /
• 1999

Large-scale cultures of plant cell, tissue, and organ have been achieved by using BTBB. When different sized BTBBs (5 L, 20 L, 100 L, 300 L, and 500 L) were tested for the culture of yew cells (Taxus cuspidata Sieb. et Zucc.), cell growth increment reached to 94.5% in SCV after 24 days of culture with 30% of inoculation cell density. However, there were some variations in the production of taxol and its derivatives among the BTBBs of different size. Approximate 4 ㎎/l of taxol and 84 ㎎/l of total taxanes were obtained by using a 500L BTBB after 6 weeks of culture. With a 20L BTBB, about 20,000 cuttings of virus-free potatoes (cv. Dejima) could be obtained by inoculating 128 explants and maintaining 8 weeks under 16 hr light illumination. The frequency of ex vitro rooting of the cuttings revealed as more than 99% under 30% shade. By incorporating two-stage culture process consisting of multiple bulblet formation in solid medium and bulblet development in liquid medium, mass propagation of lily through bioreactor seemed to be possible. In the case of 'Marcopolo', the growth of mini-bulblets in BTBB was nearly 10 folds faster than that of the solid medium. Time course study revealed that maximum MAR yield of ginseng (Panax ginseng C. A. Meyer) in a 5 L and 20 L BTBB after 8 weeks of culture was 500 g and 2.2 ㎏, respectively. By cutting the MAR once and/or twice during the culture, the yield of root biomass could be increased more than 50% in fresh weight at the time of harvest. With initial inoculum of 500 g of sliced MAR in a 500 L BTBB, 74.8 ㎏ of adventitious root mass was obtained after 8 weeks of culture. The average content of total ginseng saponin obtained from small-scale and/or pilotscale BTBBs was approximately 1% per gram dry weight. Based on our results, we suggest that large-scale cultures of plant cell, tissue, and organ using BTBB system should be quite a feasible approach when compared with conventional method of tissue culture.