• 한국환경복원기술학회지
• /
• 제19권1호
• /
• pp.61-71
• /
• 2016

The purpose of the research is to identify the optimal seeding quantity of Lespedeza cyrtobotrya and Indigofera pseudo-tinctoria as leguminous woody plants for the cut-slope revegetation. To investigate the coverage ratio and appearance frequency, we divided Lespedeza cyrtobotrya and Indigofera pseudo-tinctoria into five treatment groups with various quantities of $0.0g/m^2$, $1.0g/m^2$, $2.4g/m^2$, $3.8g/m^2$, and $5.2g/m^2$. For each treatment group, we mixed the identical quantities of herbaceous flowers (Lotus corniculatus var. japonicus, Dianthus sinensis, Aster yomena and Pennisetum alopecuroides) seeds and cool-season turfgrasses (Festuca arundinacea and Poa pratensis) seeds. In this result, as the seeding quantity of Lespedeza cyrtobotrya and Indigofera pseudo-tinctoria increased in the spray, the coverage ratio for leguminous woody plants appeared to increase whereas the coverage ratio decreased in herbaceous flowers and cool-season turfgrasses. However, when the seeding quantity of Lespedeza cyrtobotrya and Indigofera pseudo-tinctoria exceeded $3.8g/m^2$ in the spray, the coverage ratio of leguminous woody plants rather decreased compared to four treatment groups less than $3.8g/m^2$ seeding ratio. Based on the longitudinal data of coverage ratio in five treatment groups, we observed the gradual process of a short-term succession in which the dominant species shifted in the following order: First, cool-season turfgrasses; Second, herbaceous flowers; Third, leguminous woody plants. Comparing the appearance frequency of Lespedeza cyrtobotrya and Indigofera pseudo-tinctoria, Lespedeza cyrtobotrya appeared more frequent in 2014 whereas Indigofera pseudo-tinctoria appeared to be relatively more frequent in 2015. As a result, Indigofera pseudo-tinctoria was discovered to be a dominant species among woody plants. In this study, we observed that the optimal seeding quantity of Lespedeza cyrtobotrya and Indigofera pseudo-tinctoria was $2.4g/m^2{\sim}3.8g/m^2$. Moreover, the coverage ratio of 29.1%~35.4% and appearance frequency of 4.6plants~5.8plants were found in the condition of optimal seeding quantity.

• 멤브레인
• /
• 제24권3호
• /
• pp.223-230
• /
• 2014

바이오가스로부터 폴리설폰 분리막을 이용한 메탄 농축 특성을 수치해석 방법으로 분석하였다. 향류 흐름 분리막 공정의 지배 방정식을 유도하고 무차원화 한 후 Compaq Visual Fortran 6.6 소프트웨어을 이용하여 공정모사하였다. 공급 기체의 메탄 몰분율이 0.5인 경우 주어진 전형적 운전조건 상태에서 분리막 길이에 따른 잔류 측의 메탄 몰분율은 시점에서 종점으로 이동하면서 0.5에서 0.8로 증가하였으며 공급유량 대비 잔류유량 비율은 1.0에서 0.57으로 감소하였다. 공급 메탄 몰분율을 0.9로 변화시킨 경우 잔류 측의 최종 메탄 몰분율은 0.93으로, 공급대비 잔류유량은 0.91로 증가하였다. 공급 측 압력이 증가하여 투과 측 압력 대 공급 측 압력 비 값이 0.33에서 0.17로 변경될 경우 단 수율이 0.1과 같이 낮은 영역에서는 잔류 측 메탄 농도 변화가 거의 없는 반면, 단 수율이 0.3과 같이 높은 영역에서는 증가함을 확인할 수 있었다. 분리막 면적이 $1.14m^2$에서 $2.57m^2$로 증가되면 단 수율의 변화에도 불구하고 잔류 측 메탄 농도가 비교적 높게 유지됨을 알 수 있었다.

• 한국터널지하공간학회 논문집
• /
• 제21권1호
• /
• pp.93-113
• /
• 2019

최근 개착식 터널공법으로 널리 사용되고 있는 프리캐스트 라이닝 아치 구조물에 대하여 현장 계측과 수치해석 결과를 비교하여 3힌지 프리캐스트 아치 구조물의 거동을 분석하였다. 현장 계측결과, 천단부에서 가장 큰 연직변위가 측정되었으며 초기에는 상방향으로 변위가 발생하다가 뒤채움 흙이 천단부보다 높아지면서 하방향으로 변위가 발생하였다. 천단부는 최종적으로 원 위치로부터 상방향 19 mm에서 변위가 수렴하였다. 측벽부 최대 수평변위 지점에서의 수평변위는 아치상단까지 뒤채움시 터널 내측으로 발생하여 두 지점간의 수평거리가 줄어들다가, 상부 성토가 진행될수록 수평변위는 감소하여 원래 위치로 이동하였다. 프리캐스트 아치구조물에 대한 변위 분석결과, 지반-구조물의 상호작용을 잘 관찰할 수 있었으며 따라서 기존의 강성구조물과 비교하여 경제적인 설계가 가능할 것으로 기대된다. Duncan 모델을 사용한 유한요소 해석결과를 현장 변위 계측값과 변위 형상 등과 비교하면 유사한 결과를 나타내었다. 수치해석 결과에 의한 측벽부의 수평토압계수는 터널 좌측부는 0.4, 우측부는 0.7에서 수렴하여, 편토압이 발생하는 현장상황 및 현장 변위 계측 결과와도 일치하였다.

• 대한의용생체공학회:의공학회지
• /
• 제16권3호
• /
• pp.325-330
• /
• 1995

혈압에 의한 안쪽벽의 변형을 집중현상으로 인한 동백 전단부의 변형율 gradient의 심각성은 잔유 변형율에 의해 감소되거나 없을 수 있다는 가정을 실험적으로 시도했다. 잔유변형율과 압력에 의한 변형율을 측정하여 잔유변형율이 원주변형율에 끼치는 영향을 알아 보았다. 결과로서 변형율 gradient를 줄이거나 없을수도 있으나 negative gardient가 평균적으로 나타났다. 즉 전체변형율(원주변형율+잔유변형율)은 안쪽벽이 낮고 바깥쪽이 높은 것으로 나타났다.

• 분석과학
• /
• 제27권6호
• /
• pp.277-283
• /
• 2014

한외여과법을 이용하여 봉독의 알러지 원인성분인 $PLA_2$를 제거하기 위하여 압력, 농도, 분자크기의 영향을 조사하였다. 봉독의 주요성분 분자량을 바탕으로 한외여과막의 투과크기를 선정하고 농도와 압력을 달리하였다. 그 결과, melittin과 apamin 함량은 유지되면서 $PLA_2$를 제거하는 최적조건(1 mg/mL, 20 psi, 10,000 dalton)을 찾았으며, 이를 HPLC와 SDS-PAGE로 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3233-3237
• /
• 2010

A $Li[Ni_{0.3}Co_{0.4}Mn_{0.3}]O_2$ cathode was modified by coating with Li-La-Ti-O, and the effect of the coating thickness on their electrochemical properties was studied. The thickness of the coating on the surface of $Li[Ni_{0.3}Co_{0.4}Mn_{0.3}]O_2$ was increased by increasing the wt % of the coating material. The rate capability of the Li-La-Ti-O-coated electrode was superior to that of the pristine sample. 1- and 2-wt %-coated samples showed considerable improvement in capacity retention at high C rates. However, the rate capability of a 5-wt %-coated sample decreased. All the coated samples showed a high discharge capacity and slightly improved cyclic performance under a high cut-off voltage (4.8 V) condition. Results of a storage test confirmed that the Li-La-Ti-O coating layer was effective in suppressing the dissolution of the transition metals as it offered protection from the attack of the acidic electrolyte. In particular, the 2- and 5-wt %-coated samples showed a better protection effect than the 1-wt %-coated sample.

• 한국산림과학회지
• /
• 제1권1호
• /
• pp.1-6
• /
• 1962

Hysteresis Loops explaining relationship between E.M.C. and relative humidities of some commercial woods grown in Korea which have not been inspected were studied. Because of Hysteresis Loops are differently constructed among species, the loop of each species is necessary to plot in order to apply for seasoning of wood directly. Therefore relationship between E.M.C. and relative humidities, and Hysteresis Loops were inspected and compaired between species. Small sized ($3{\times}3{\times}1.3cm$) twenty pieces of wood blocks for each species were taken from log which cut few years ago and already attained air dry condition. Five relative humidity conditions (9, 32, 58, 82 and 91%) were controlled to keep constant in the cabinet under temperature $25^{\circ}C$. According to the results, it is concluded that there are considerable differences on the E.M.C. among two types of sorption, eight species and five different relative humidity conditions. Adsorption and desorption curves are showing characteristic Sigmeid Curves and desorption curves always are on the adsorption curves at all compaired species. Average hysteresis ratio is 0.75, the constructed loops of tested species are showing open hysteresis generally and flatten loop constructions of Qnerets aemitissima and Robinia pseudoaeaeia of hard wood species than other soft wood are considered to be established by differences of stability between hard and soft wood.

• 한국축산식품학회지
• /
• 제18권2호
• /
• pp.176-184
• /
• 1998

The objective of this study was to investigate the effects of freezing rate on aroma retention and to examine the mechanism of aroma retention during freeze drying process. Our experiments were carried out with self-manufactured freeze-dryer. Gelatin gels (2% w / w, 80${\times}$20mm) containing diacetyl(2mg/ml) were frozen unidirectionally (Neumann's model) from the bottom at -45, -30, -20, and -15$^{\circ}C$ and followed with freeze-drying. Under the upper conditions we measured freezing rate and the change of temperature and pressure during freeze drying. Freeze-dried gelatins were cut horizontally into 5 mm thickness from the bottom measured and diacetly contents. Besides, we observed the effect of the relative humidity of the diacetyl contents freeze-dried gelatin during storage. The retained diacetyl content was increased at high freezing temperature and in order of 0∼5, 5∼10, 10∼15, 15∼20 mm section from the bottom of the sample. It was observed that the retained diacetyl content was high in 15∼20 mm section. The retained diacetyl content and freeze-dried gelatin stored in the condition of high relative humidity was decreased significantly but in the low relative humidity case, was it decreased in small amount. The results of our experiment resents that the low temperature freezing and low humidity storing condition is effective for preserving aroma compound in food.

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.103-112
• /
• 2017

PURPOSES : In this study, field performance evaluation of crack treatment of pavement and the feasibility of surface treatment of pavement are presented. The performance and cost of preventive maintenance methods have been previously verified, and the methods are being used in many developed countries and cities. However, the performance and cost of the system have not been verified in domestic, field applications. Therefore, in order to improve performance, the field performance is evaluated, and a reasonable cost is proposed. METHODS : Visual Inspection was conducted to evaluate the field application and performance of the preventive maintenance method. In addition, the PCI index was calculated from the results of visual inspection of the application area of the surface treatment method, and the performance life of each method was predicted. For the economic evaluation, life cycle cost analysis was performed using the life cycle cost analysis program. RESULTS :In order to evaluate and quantify the field performance of crack repair material, the residue condition of the pavement surface after crack treatment, rather than the performance of the material, is evaluated. In addition, the crack resistance and performance life of surface treatment methods are evaluated. The cost of currently available treatment methods are compared to the common pavement cut and overlay method, and it is determined that the preventive method is not economical based on life cycle cost analysis. CONCLUSIONS :Because of the characteristics of cracking, it is necessary to conduct the evaluation of currently applied methods and the analysis of the cause of damage, by visual inspection. Moreover, in order to evaluate the performance and economic suitability of the currently applied surface treatment methods, it is necessary to acquire information on application sections by monitoring their long-term conditions and performance.

• 산업식품공학
• /
• 제23권2호
• /
• pp.87-93
• /
• 2019

공기 주입식 스팀-에어 레토르트 내에서 스팀온도, 내부가압, CUT 등의 공정변수가 레토르트 내부의 온도 균일성에 미치는 영향을 평가하였다. 고온살균(121℃)이 저온살균(82℃) 보다 공정구간동안 온도분포가 더 균일하고 안정적이었다. 내부 가압이 클수록 저온살균조건의 공정에서는 온도분포가 안정적이었고, 이와 반대로 고온살균조건의 공정에서 온도분포가 더 불균일한 것으로 나타났다. 승온구간을 조절한 경우에는 레토르트 내의 온도분포에는 유의적인 차이를 나타내지 않았다. 공정구간동안 레토르트 내부에서 냉점은 수직방향 1층의 위로 확인되었고, 수평방향에서는 맨 뒤쪽 중앙 부분이 가장 높은 온도를 유지하여 공정 동안 이 위치들을 주의를 할 필요가 있었다. 또한 레토르트 내부의 양 옆 위치가 다른 위치에 비해 특히 온도분포가 불안정한 것으로 확인되었으므로 레토르트 가공 공정에서 주의해야 할 것으로 판단되었다.