• 한국정밀공학회지
• /
• 제16권8호
• /
• pp.178-185
• /
• 1999

In tool condition monitoring systems, parameters should be set to a certain threshold. In many cases, however, the threshold is dependent on cutting conditions, especially the radial immersion ratio. In this presented is a method of on-line estimation of the radial immersion ratio in face milling. When a tooth finishes sweeping, a sudden drop of cutting force occurs. The force drop is equal to the cutting force that acting on a tooth at the swept angle of cut and can be acquired from cutting force signals in feed and cross-feed directions. Average cutting force per tooth period can also be calculated from cutting force signals in two directions. The ratio to cutting forces in two directions acting on a tooth at a certain swept angle of cut and the ratio of average cutting forces in two directions per tooth period are functions of the swept angle of cut and the ratio of radial to tangential cutting forces. Using these parameters, the radial immersion ratio is estimated. Various experiments are performed to verify the proposed method. The results show that the radial immersion ratio can be estimated by this method regardless of other cutting conditions.

• 한국생산제조학회지
• /
• 제9권6호
• /
• pp.57-64
• /
• 2000

In order to regulate cutting torque in milling, monitoring system should be set to a certain threshold. Radial immersion ratio is an important factor to determine the threshold and should be estimated in process for automatic regulation. In this paper, on-line estimation of the radial immersion ratio using spindle motor current in face milling is presented. When a tooth finishes sweeping, a sudden drop of cutting torque occurs. This torque drop is equal to the cutting torque acting on a single tooth at the swept angle of cut and can be acquired from cutting torque signals. Average cutting torque per revolution can also be calculated from cutting torque signals. The ratio of cutting torque acting on a single tooth at the swept angle of cut to the average cutting torque per revolution is a function of the swept angle of cut and the number of teeth. Using the magnitude of this ratio, the radial immersion ratio is estimated. Identical algorithm is adopted to estimate the immersion ratio based on the spindle motor current measurement. The experiments performed under different cutting conditions show that the radial immersion ratio can be estimated within 10% error range by the proposed method using spindle motor current. Varying immersion ratio is also estimated well using the presented algorithm.

• 디지털콘텐츠학회 논문지
• /
• 제3권2호
• /
• pp.221-233
• /
• 2002

본 논문에서는 용량제약이 있는 설비의 위치선정 및 수요자 할당 문제(Capacitated Facility Location-Allocation Problem)에 대한 정수계획 모형과 해법을 제시하였다. 이 문제는 설비를 설치할 수 있는 후보지의 집합과 각 후보지별로 설치 가능한 설비의 용량 및 설치비용, 수요를 만족시켜야 할 수요자의 집합 및 각 수요자와 설치 후보지 사이의 운반비용이 주어져 있을 때, 설비들의 설치비용과 수요의 운반비용의 합을 최소화하는 설비의 설치 위치 및 대수 그리고 수요자와 설비간의 연결상태를 구성하는 문제이다. 본 논문에서는 이 문제에 대한 두 가지 정수계획모형을 제시하고, 이 모형에 대한 최적해를 구하기 위한 다면체적 절단평면을 이용한 분지-절단해법(Branch-and-cut algorithm)과 열생성기법을 이용한 분지-평가해법(Branch-and-Price algorithm)을 제시하였다. 제시된 모형과 해법은 물류시스템의 설계 및 정보통신시스템의 통신설비 위치선정 등에 활용될 수 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.541-544
• /
• 2004

This paper presents a new circuit panitioning algorithm using wire redundancy removal. This algorithm consist of the two steps. In the first step. We propose a new IIP(Iterative Improvement Partitioning) technique that selects the method to choice cells according to improvement status using two kinds of bucket structures, the one kept by total gain, and the other by updated gain. In the second step, we select the target wire in the cut-set. We add a alternative wire in the circuit to remove the target wire. For this we use wire redundancy removal and addition method The experimental results on MCNC benchmark circuits show improvement up to $41-50\%$ in cut-size over previous algorithms

• 대한수학회논문집
• /
• 제31권1호
• /
• pp.27-40
• /
• 2016

We define the notion of a residuated lattice valued function on a set as Jun and Song have done in BCK-algebras. We also investigate related properties of residuated lattice valued function. We establish the codes generated by residuated lattice valued function and conversely we give residuated lattice valued function and residuated lattice obtained by the giving binary block-code.

• 대한기계학회논문집
• /
• 제19권1호
• /
• pp.271-276
• /
• 1995

This paper presents a systematic method for the dynamic analysis of flexible mechanical systems containing closed kinematic loops. Kinematics between pairs of contiguous flexible bodies is described with the joint coordinates and the deformation modal coordinates. The cut-joint constraint equations associated with the closed kinematic loops are derived, simply using the geometric conditions. The equations of motions are initially written in terms of the joint and modal coordinates using the velocity transformation technique. Lagrange multipliers associated with the cut-joint constraints for closed-loop systems are then eliminated systematically using the generalized coordinate partitioning method, resulting to a minimal set of equations of motion.

• 한국항해항만학회지
• /
• 제35권10호
• /
• pp.847-853
• /
• 2011

본 연구는 수입된 목재를 가공하여 내수로 전환하는 활동뿐만 아니라 인천항에서의 부가가치 활동을 통해 완제품, 반제품의 형태로 타국가로의 재수출이 가능한 비즈니스 모델을 제안하고자 하였다. 구체적으로 부가가치를 창출하기 위한 세부방안을 살펴보면 인천북항을 활용하는 수입다변화 모델, 통합가공센터 팰릿시설 조성 모델, 목재 공동물류센터 모델, 수출형 Pre-Cut 자재개발모델 그리고 수출가공형 부가가치 창출모델을 제시하였다.

• Journal of Mechanical Science and Technology
• /
• 제18권2호
• /
• pp.193-202
• /
• 2004

This paper presents a computer method for the dynamic analysis of a system of rigid bodies in plane motion. The formulation rests upon the idea of replacing a rigid body by a dynamically equivalent constrained system of particles. Newton's second law is applied to study the motion of the resulting system of particles without introducing any rotational coordinates. A velocity transformation is used to transform the equations of motion to a reduced set. For an open-chain, this process automatically eliminates all of the non-working constraint forces and leads to an efficient integration of the equations of motion. For a closed-chain, suitable joints should be cut and few cut-joints constraint equations should be included. An example of a closed-chain is used to demonstrate the generality and efficiency of the proposed method.

• 산업경영시스템학회지
• /
• 제15권26호
• /
• pp.13-19
• /
• 1992

MODM(multiobjective decision-making)problem is very complex system for the analysist and decision maker. Therefore, it requires suitable MODM method to solve multiobjective decision-making problem. This paper presents an interactive fuzzy decision making method for solving multiobjective nonlinear programming problems with fuzzy goals and $\alpha$-cut set of fuzzy numbers. In our interactive method, if the decision maker specifies the degree $\alpha$of the objective value and the imprecise goals, λ-mux problem is solved. To examplify the proposed method, an interactive computer programming written in FORTRAN and an illustrate numerical example along with computer outputs are presented.

• Restorative Dentistry and Endodontics
• /
• 제2권1호
• /
• pp.7-9
• /
• 1976

This study was performed to reveal the effect of self-curing acrylic resin to dental pulp when the resin was used directly on the freshly cut dentin. Class V cavity preparations were made on the teeth of dogs with No. 701 carbide bur at a speed of 200,000 rpm and with an air water spray. Petrolatum jelly was coated on the inner surfaces of the cavities. After that, doughs of self-curing acrylic resin were filled in these cavities and before completely set these were removed and cemented with zinc oxide and eugenol cement. The dogs were sacrified between 1 day and 3 weeks at the intervals of one week and routinely processed with hematoxylin and eosin stain for histopathologic interpretation. The results were as followings; 1. The inflammatory changes of the pulp can be seen after the use of self-curing acrylic resin on freshly cut dentin. 2. The inflammatory changes of the pulp were not completely subsided until the end of third experimental week.