• 제목/요약/키워드: Cut-Off Frequency

검색결과 405건 처리시간 0.025초

직렬아크현상의 검출기술 및 장치 (Detection Technique and Device of Series Arcing Phenomena)

  • 지홍근;정광석;박대원;길경석;서동환;류길수
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제34권2호
    • /
    • pp.332-338
    • /
    • 2010
  • 전력계통에서 아크현상이 원인이 되는 전기화재는 전기제품의 사용증가에 따라 급증하고 있으나, 이들 사고를 방지할 수 있는 확립된 방법은 없다. 이들 배경에서 본 논문은 공기조화기에서 직렬아크 검출 기술과 장치에 대한 실험적 결과에 대해 기술하였다. 공기조화기의 불완전한 접속부에서 발생하는 직렬아크를 모의하고, 주파수 스펙트럼을 FFT로 분석한 결과, 190 kHz~250 kHz와 900 kHz~1.6 MHz 에 존재함을 알 수 있었다. 저역차단주파수가 170 kHz이며 60 Hz를 176 dB까지 감쇄시킬 수 있는 아크검출 및 파형정형 회로를 설계하였다. 또한 스위치 조작, 인버터 운전 및 서지 등에 의해 발생하는 노이즈로부터 직렬아크신호를 분리할 수 있는 알고리즘을 제안하였다. 적용실험은 UL1699에 규정 되어있는 아크발생장치를 이용하여 여러 형태의 공기조화기에서 수행되었으며, 99 %이상 검출능력을 나타내었다.

$0.1{\mu}m$ Metamorphic HEMT를 이용한 고이득 D-Band MMIC 2단 구동증폭기 개발 (Development of a Two-Stage High Gain D-Band MMIC Drive Amplifier Using $0.1{\mu}m$ Metamorphic HEMT Technology)

  • 이복형;이진구
    • 대한전자공학회논문지SD
    • /
    • 제45권12호
    • /
    • pp.41-46
    • /
    • 2008
  • 본 논문에서는 $0.1{\mu}m$ InGaAs/InAlAs/GaAs metamorphic HEMT기술을 기반으로 하여 D-Band(110 - 140 GHz) 대역에서 동작하는 MMIC 2단 구동 증폭기를 제작하였다. 제작된 구동 증폭기는 밀리미터파 대역인 110 GHz에서 10 dB 이상의 우수한 $S_{21}$ 이득 특성을 보였으며, 이때 반사 특성 또한 $S_{11}$ -3.5 dB와 $S_{22}$ -6.5 dB로 양호한 특성을 얻었다. 이러한 높은 성능의 MMIC 구동증폭기의 특성은 주로 MHEMT 성능에 기인한다. 본 논문에서 적용한 $0.1{\mu}m$ MHEMT는 760 mS/mm의 전달컨덕턴스 특성과 195 GHz의 차단주파수 391 GHz의 최대공진 주파수 특성을 갖는다.

불평형 계통전압에 강인한 연료전지용 전력변환시스템의 PLL 방법 (A Robust PLL of PCS for Fuel Cell System under Unbalanced Grid Voltages)

  • 김윤현;김왕래;임창진;김광섭;권병기;최창호
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2008년도 하계학술대회 논문집
    • /
    • pp.103-105
    • /
    • 2008
  • In grid-interconnection system, a fast, robust and precise phase angle detector is most important to grid synchronization and the active power control. The phase angle can be easily estimated by synchronous dq PLL system. On the other hand under unbalanced voltage condition, synchronous dq PLL system has problem that harmonics occur to phase angle or magnitude of grid voltage because of the effect of the negative sequence components. So, To eliminate the negative sequence components, the PLL method using APF (All Pass Filter) in a stationery reference frame to extract positive sequence components under unbalanced voltage condition is researched. In this paper, we propose a new PLL method with decoupling network using APF in a synchronous reference frame to extract the positive sequence components of the grid voltage under unbalanced grid. The cut-off frequency of APF in a synchronous reference frame can be set to twice of the fundamental frequency comparing with that of APF in a stationery reference frame which is the fundamental frequency. The proposed PLL strategy can detect the phase angle quickly and accurately under unbalanced gird voltages. Simulation and experimental results are presented to verify the proposed strategy under different kind of voltage dips.

  • PDF

CMOS 트랜지스터의 채널 폭 및 길이 변화에 따른 RF 특성분석 및 최적화 (Analysis and Optimization of the CMOS Transistors for RF Applications with Various Channel Width and Length)

  • 최정기;이상국;송원철
    • 대한전자공학회논문지SD
    • /
    • 제37권8호
    • /
    • pp.9-16
    • /
    • 2000
  • 0.35m CMOS공정을 이용하여 MOSFET의 RF특성을 평가하였다. 채널길이(L-0.25~0.8m)와 채널폭(W=50~600m) 및 바이어스 전압의 변화에 따른 RF특성을 분석하였으며, 차단주파수$f_T$는 최대 22GHz, 최대공진주파수($f_{max}$)는 최대 28GHz의 값을 얻었다. 채널폭의 변화에 대해서 차단주파수는 영향을 받지 않았으며, 최대공진주파수는 감소하는 경향을 보였고, 채널길이 증가에 대해서는 차단주파수 및 최대공진주파수 모두 감소하는 경향을 나타내었다. 최소잡음지수는 채널폭이 증가할수록 감소하고 채널길이가 증가할수록 증가하는 경향을 얻었는데, 2GHz에서 최소 0.45dB의 값을 얻었다. 평가결과로부터 0.35m CMOS공정이 2GHz대역의 상업용 RFIC 구현에 충분한 RF특성을 보유하고 있음을 확인할 수 있었으며, 바이어스 및 채널폭과 길이변화에 대한 CMOS 트랜지스터의 RF 특성분석을 통하여 RF 회로설계에 대한 지침을 제시하였다.

  • PDF

송전선로 주변과 비주변 초등학생을 대상으로 극저주파 자기장 노출과 뇨중 멜라토닌 분비량간의 상관성 연구 (Relationship Between Urinary Melatonin Levels and Extremely Low Frequency Magnetic Fields for the Selected Primary Schoolchildren Living Nearby and Away from Overhead Transmission Power Line)

  • 조용성;김윤신;이종태;홍승철;장성기
    • 한국환경보건학회지
    • /
    • 제30권3호
    • /
    • pp.191-206
    • /
    • 2004
  • The present study investigated the hypothesis that a extremely low frequency magnetic field partially suppresses the synthesis of melatonin in a group of 28 primary schoolchildren living nearby and 60 primary schoolchildren aged 12 years living far away from overhead transmission power lines from December 2003 to April 2004 in Seoul, Korea. The mean personal exposure levels of the primary schoolchildren living nearby overhead transmission power line were 0.37 ${\mu}$T, whereas the value for the primary schoolchildren living away from overhead transmission power line 0.05 mT. From simple analyses, the mean melatonin levels in the primary schoolchildren living nearby were lower than away from overhead transmission power line, but not statistically significant differences in the levels of the melatonin (p=0.2421), whereas the statistically significant differences in the levels of the melatonin related to the distance from residence to power line less and more than 100 m by cut-off point (p=0.0139). In multiple linear regression analyses, distance from residence to power line (p=0.0146) and dietary habit about burned meat (p=0.0170) proved to be significant risk factors in the mean nocturnal melatonin levels in the primary schoolchildren. In conclusion, these results demonstrate that urinary levels of nocturnal melatonin are not altered in primary schoolchildren exposed to extremely low frequency magnetic field(ELF-MF) at overhead transmission power line.

Vibration Suppression Control for an Articulated Robot: Effects of Model-Based Control Applied to a Waist Axis

  • Itoh, Masahiko;Yoshikawa, Hiroshi
    • International Journal of Control, Automation, and Systems
    • /
    • 제1권3호
    • /
    • pp.263-270
    • /
    • 2003
  • This paper deals with a control technique of eliminating the transient vibration of a waist axis of an articulated robot. This technique is based on a model-based control in order to establish the damping effect on the mechanical part. The control model is related to the velocity control loop, and it is composed of reduced-order electrical and mechanical parts. Using this model, the velocity of the load is estimated, which is converted to the motor shaft. The difference between the estimated load speed and the motor speed is calculated dynamically, and it is added to the velocity command to suppress the transient vibration of a waist axis of the robot arm. The function of this technique is to increase the cut-off frequency of the system and the damping ratio at the driven machine part. This control model is easily obtained from design or experimental data and its algorithm can be easily installed in a DSP. This control technique is applied to a waist axis of an articulated robot composed of a harmonic drive gear reducer and a robot arm with 5 degrees of freedom. Simulations and experiments show satisfactory control results to reduce the transient vibration at the end-effector.

Hot electron에 의한 RF-nMOSFET의 DC및 RF 특성 열화 모델 (Hot electron induced degradation model of the DC and RF characteristics of RF-nMOSFET)

  • 이병진;홍성희;유종근;전석희;박종태
    • 전자공학회논문지D
    • /
    • 제35D권11호
    • /
    • pp.62-69
    • /
    • 1998
  • Hot carrier 스트레스후의 RF-nMOSFET의 DC 및 RF 특성열화를 분석하기 위해 기존의 열화 모델을 적용하였다. 드레인전류 열화보다 차단주파수 열화가 심하였으며 RF-nMOSFET의 열화변화율 n과 열화변수 m은 기존의 bulk MOSFET의 것과 같았다. Multi-finger 게이트 소자에서 finger수가 많을수록 열화가 적게 된 것은 큰 소스/드레인의 저항과 포화전압에 의한 것임을 알 수 있었다. 스트레스의 후의 RF성능 저하는 g/sub m/과 C/sub gd/의 감소와 g/sub ds/의 증가에 의한 것임을 알 수 있었다. 기판전류를 측정하므로 RF소자의 DC 및 RF특성 열화를 예견할 수 있었다.

  • PDF

900MHz ZigBee System 응용 분포소자형 Band Pass Filter 설계 (Design of Distributed Band Pass Filter for 900MHz ZigBee System applications)

  • 이중근;유찬세;김동수;원광호;이우성
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2005년도 추계종합학술대회
    • /
    • pp.163-166
    • /
    • 2005
  • Multilayer LTCC technology enables RF modules to be reduced dramatically by taking advantage of the three dimension flexibility. Compared to a conventional two dimensional PCB, LTCC allows higher density, reduced size, and lower cost. In this research, BPF based on LTCC for 900MHz ZigBee application was implemented which can replace SAW filter with using the material of the Dupont9599's dielectric constant 7.8. And distributed baud pass filter for 900MHz ZigBee system applications is presented. Using resonator stripline and capacitance, 2nd order band pass filter was designed. Adjusting resonator's length and capacitance is easy to tune at accurate center frequency by shifting band because ZigBee system is using narrow bandwidth, $902MHz^{\sim}928MHz$. Also resonator has no limitation in space, so reducing size is possibile. Designed filter had I.L. 2.8dB at 915MHz and attenuation at 815MHz, 1015MHz was 16dB, 15dB, respectively. Therefore, the sharpe cut-off and good insertion loss for ZigBee system application.

  • PDF

소형 선박용 전기추진시스템을 위한 PMSM의 센서리스 제어 (Sensorless Control of a Permanent Magnet Synchronous Motor for Electric Propulsion System of Small Ships)

  • 정태영;와유쿤토위보오;정석권
    • 수산해양교육연구
    • /
    • 제29권3호
    • /
    • pp.778-784
    • /
    • 2017
  • This paper proposes a sensorless speed control of a permanent magnet synchronous motor (PMSM) based on an adaptive sliding mode observer (SMO) for electric propulsion system of small ships. An adaptive observer gain is proposed based on the Lyapunov's stability criterion to reduce the chattering problem at any speed operation instead of the constant gain observer. Furthermore, a cascade low-pass filter with variable cut-off frequency is suggested to strengthen the filtering capability of the observer. The experimental results from a 1.5 kW PMSM drive are provided to verify the effectiveness of the proposed adaptive SMO. The result shows that the proposed method gives good speed control performances even when the PMSM operates at 0.5% from its rated speed value.

새로운 자동 튜닝 기능을 가지고 있는 CMOS 다중 모드 기저 대역 필터의 설계 (A Design of CMOS Multi-Mode Baseband Filter with New Automatic Tuning)

  • 이강윤;구현철;허정
    • 대한전자공학회논문지SD
    • /
    • 제43권2호
    • /
    • pp.34-41
    • /
    • 2006
  • 본 논문에서는 PDC/GSM/EDGE/WCDMA를 동시에 지원하는 CMOS 다중 모드 기저대역 필터의 구조 및 새롭게 제안하는 자동 튜닝 방법을 제시한다. 기저 대역 채널 선택 필터를 구현하기 위해서 5차 Chebyshev 저대역 통과 필터를 설계하였다. 면적을 최소화하기 위해서 각 모드들 사이의 저항과 커패시터가 효율적으로 공유되었다. 또한, 공정 변화에 의한 영향을 상쇄시키기 위한 새로운 차단 주파수 튜닝 방법이 제안 되었다. 새로운 튜닝 방법은 면적과 MOS 스위치에 의한 노이즈의 영향을 줄일 수 있다.