• 한국전자파학회논문지
• /
• 제22권9호
• /
• pp.912-918
• /
• 2011

본 논문에서는 도파관의 차단 주파수 이상에서 평형 조건을 만족하는 CRLH(Composite Right-/Left-Handed) 직각 도파관이 설계되었다. 제안된 CRLH 도파관 구조는 특정 주파수에서 음의 유효 투자율 특성을 나타내는 하나의 단락 스터브와 음의 유효 유전율을 구현하는 두 개의 꼬인 형태의 H-plane 아이리스로 구성된다. 도파관 내부에 삽입된 꼬인 형태의 H-plane 아이리스는 단락 스터브와 아이리스 사이의 상호 작용을 최소화하여 RH(Right-Handed) 대역과 LH(Left-Handed) 대역의 밴드 갭을 조절하는 직렬 및 병렬 공진 주파수를 독립적으로 제어할 수 있으므로, 평형 조건을 만족하는 CRLH 도파관의 설계가 가능하다. 설계된 CRLH 도파관 구조의 해석을 위하여 교차 결합된 등가 회로가 제시되었고, 시뮬레이션 및 측정 결과로 부터 차단 주파수 이상에서 RH 대역과 LH 대역 사이에 밴드 갭이 존재하지 않는 평형 조건의 CRLH 전송선 특성을 확인하였다.

• 대한전자공학회논문지SD
• /
• 제39권1호
• /
• pp.83-88
• /
• 2002

HFET 소자의 선형성과 게이트-트레인 항복특성을 향상시키기 위해 부분채널 도핑된 Al/sub 0.25/Ga/sub 0.75/As/In/sub 0.25/Ga/sub 0.75/As/Al/sub 0.25/Ga/sub 0.75/As 이종접합 구조를 갖는 FET를 제안하였다. 제안된 HFET는 게이트 전극 아래로 도핑되지 않은 AlGaAs 진성공급층을 두어 -2OV 의 높은 항복전압을 얻었다. 또한 소자의 InGaAs 채널에 부분 도핑을 실시하여, 균일 채널 도핑을 실시한 경우보다 향상된 선형성을 유도하였고, 2차원 전산모사 견과와 제작 및 측정결과를 통해 선형성의 향상을 확인하였다. 본 실험에서 제안된 HFET소자는 DC측정 결과와 고주파측정 결과 모두에서 기존의 FET소자들에 비해 향상된 선형성을 나타내었다.

• Smart Structures and Systems
• /
• 제23권2호
• /
• pp.141-153
• /
• 2019

This research deals with wave propagation of the functionally graded (FG) nano-beams based on the nonlocal elasticity theory considering surface and flexoelectric effects. The FG nano-beam is resting in Winkler-Pasternak foundation. It is assumed that the material properties of the nano-beam changes continuously along the thickness direction according to simple power-law form. In order to include coupling of strain gradients and electrical polarizations in governing equations of motion, the nonlocal non-classical nano-beam model containg flexoelectric effect is used. Also, the effects of surface elasticity, dielectricity and piezoelectricity as well as bulk flexoelectricity are all taken into consideration. The governing equations of motion are derived using Hamilton principle based on first shear deformation beam theory (FSDBT) and also considering residual surface stresses. The analytical method is used to calculate phase velocity of wave propagation in FG nano-beam as well as cut-off frequency. After verification with validated reference, comprehensive numerical results are presented to investigate the influence of important parameters such as flexoelectric coefficients of the surface, bulk and residual surface stresses, Winkler and shear coefficients of foundation, power gradient index of FG material, and geometric dimensions on the wave propagation characteristics of FG nano-beam. The numerical results indicate that considering surface effects/flexoelectric property caused phase velocity increases/decreases in low wave number range, respectively. The influences of aforementioned parameters on the occurrence cut-off frequency point are very small.

• Journal of Astronomy and Space Sciences
• /
• 제37권4호
• /
• pp.237-247
• /
• 2020

The ground tracking support is a critical factor for the navigation performance of spacecraft orbiting around the Moon. Because of the tracking limit of antennas, only a small number of facilities can support lunar missions. Therefore, case studies for various ground tracking support conditions are needed for lunar missions on the stage of preliminary mission analysis. This study analyzes the ground supporting condition effect on orbit determination (OD) of Korea Pathfinder Lunar Orbiter (KPLO) in the lunar orbit. For the assumption of ground support conditions, daily tracking frequency, cut-off angle for low elevation, tracking measurement accuracy, and tracking failure situations were considered. Two antennas of deep space network (DSN) and Korea Deep Space Antenna (KDSA) are utilized for various tracking conditions configuration. For the investigation of the daily tracking frequency effect, three cases (full support, DSN 4 pass/day and KDSA 4 pass/day, and DSN 2 pass/day and KDSA 2 pass/day) are prepared. For the elevation cut-off angle effect, two situations, which are 5 deg and 10 deg, are assumed. Three cases (0%, 30%, and 50% of degradation) were considered for the tracking measurement accuracy effect. Three cases such as no missing, 1-day KDSA missing, and 2-day KDSA missing are assumed for tracking failure effect. For OD, a sequential estimation algorithm was used, and for the OD performance evaluation, position uncertainty, position differences between true and estimated orbits, and orbit overlap precision according to various ground supporting conditions were investigated. Orbit prediction accuracy variations due to ground tracking conditions were also demonstrated. This study provides a guideline for selecting ground tracking support levels and preparing a backup plan for the KPLO lunar mission phase.

• 전자공학회논문지A
• /
• 제33A권6호
• /
• pp.164-171
• /
• 1996

We report the experimental resutls on AlGaAs/GaAs heterojunction bipolar transistors (HBTs) with carbon-doped base structure. To characterize the output power, load-pull mehtod was employed. By characterizing the devices with HP8510C, we extracted the small-signal equivalent circuit. The HBTs were fabricated employing wet mesa etching and lift-off process of ohmic metals. the implementation of polyimide into the fabriction process was accomplished to obtain the lower dielectric constant resultig in significant reduction of interconnect routing capacitance. The fabricated HBTs with an emitter area of 6${\times}14{\mu}m^{2}$ exhibited current gain of 45, BV$_{CEO}$ of 10V, cut-off frequency of 30GHz and power gain of 1 3dBm. To extract the small signal equivalent circuit, the de-embedded method was applied for parasitic parameters and the calculation of circuit equations for intrinsic parameters.

• 대한음성학회지:말소리
• /
• 제45호
• /
• pp.1-14
• /
• 2003

This paper criticizes S. Kim (1992), claiming that the perception of place cues in the reduced stop consonant clusters ('reducing' means 'cutting off' the acoustic silence in stop clusters) largely depends on the acoustic characteristics such as formant transition and noise frequency distribution of stop burst, rather than the closure duration time as advocated by S. Kim (1992). The claim is based on the perception test conducted upon 111 stimuli over 10 subjects. The finding is that, when the closure duration is cut off up to the point where only one stop is perceived, place of the second stop, not the first one, in the cluster is in most cases perceived regardless of the places of the first and second stops. It is likely that the place cues of the stop in the prevocalic position mask those in the postvocalic position.

• 한국수산과학회지
• /
• 제30권1호
• /
• pp.16-30
• /
• 1997

Application of digital filter to the wave analysis is studied using the observed data by wave gauge. Sea wave data obtained from wave gauge always include long wave frequency components. In order to estimate the sea wave parameters, we must re-analyzed wave data by using a digital filter and the concept of mean sea level correction method. By the wave by wave analysis and spectral methods, sea wave parameters on the basis of wave data obtained by the conventional method and digital filter are compared. The best-fitted design filter determined by the necessary conditions of frequency responses, can be obtained by calculating various transfer functions. Thus, to get the best the digital filter design, both Butterworth filter and Savitzky-Golay filter of digital filter are used in the frequency and time domain, respectively. Three cases of observation wave data are calculated by applying digital filter. The components of different frequency bands in the surf zone are coexisted in three cases. The wave data for wind wave components is computed using the digital filter the surf zone and off-surf zone, and based on the filtered data, wave parameters are calculated by the spectral analysis and wave by wave analysis methods, respectively. As a results, when sea wave data observed by wave gauge are analyzed, the Savitzky-Golay method is recommended which can well appear cut-off frequency by experimental choosing filter length in the time domain. The better mean sea level correction method is the Butterworth filter in the frequency domain.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권3호
• /
• pp.251-263
• /
• 2008

In this paper, we report an analytical modeling and 2-D Synopsys Sentaurus TCAD simulation of ion implanted silicon carbide MESFETs. The model has been developed to obtain the threshold voltage, drain-source current, intrinsic parameters such as, gate capacitance, drain-source resistance and transconductance considering different fabrication parameters such as ion dose, ion energy, ion range and annealing effect parameters. The model is useful in determining the ion implantation fabrication parameters from the optimization of the active implanted channel thickness for different ion doses resulting in the desired pinch off voltage needed for high drain current and high breakdown voltage. The drain current of approximately 10 A obtained from the analytical model agrees well with that of the Synopsys Sentaurus TCAD simulation and the breakdown voltage approximately 85 V obtained from the TCAD simulation agrees well with published experimental results. The gate-to-source capacitance and gate-to-drain capacitance, drain-source resistance and trans-conductance were studied to understand the device frequency response. Cut off and maximum frequencies of approximately 10 GHz and 29 GHz respectively were obtained from Sentaurus TCAD and verified by the Smith's chart.

• 전기학회논문지
• /
• 제67권9호
• /
• pp.1159-1164
• /
• 2018

Vacuum circuit breakers(VCB) are widely used for current interruption of high-voltage inductive loads such as induction motors. This VCB can be chopped off before the current zero due to its high arc-extinguishing capability. One of the outstanding features of VCB is that it can cut off high frequency re-ignition current more than other circuit breakers. If the transient recovery voltage generated in the arc extinguishing is higher than the dielectric strength of the circuit breaker, a re-ignition phenomenon occurs. The surge voltage of the re-ignition is very high in magnitude and the steepness of the waveform is so severe that it can act as a high electrical stress on the winding. If the high frequency current of one phase affects the other two phases when the re-ignition occurs, it may cause a high surge voltage due to the virtual current chopping. If the magnitude of the voltage allowed in the motor winding is high or the waveform level is too severe, it may lead to insulation breakdown. Therefore, it is necessary to reduce the voltage to within a certain range. In this study, we briefly explain the various phenomena at the time of interruption, analyzed the magnitude of the dielectric strength and the transient recovery voltage at the simultaneous three-phase interruption that can give the greatest influence to the inductive load, proposed a method to reduce the impact.

• 조명전기설비학회논문지
• /
• 제27권1호
• /
• pp.76-84
• /
• 2013

The renewable energy sources is raising for use of grid connected systems, for which higher power quality requirements are being issued. A grid connected converter requires a LC-filter stage, this one is lightly damped for efficiency constraints. Hence, it is subject to resonance if excited by the converter current harmonics or pre-exciting grid voltage harmonics. In this paper, an active damping technique employing notch filter for damping of the resonance frequency is introduced. This technique doesn't need to additional sensors. In addition, it is simple to apply for various systems. Monitoring of the resonance frequency ensures the stable operation of the proper connection and disconnection of the grid. This paper proposes the estimating method of a resonant frequency to determine the cut-off frequency of the notch filter. This method is validated by both simulation and experimental results.