• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.16 no.5
• /
• pp.113-118
• /
• 2006

Pseudonyms must be maintained anonymously even to the organization that issues the pseudonyms, but when some event occurs that policy defines the real identity for the pseudonym must be able to be traced. We propose a private pseudonym retrieval protocol with controlled traceability using m-out-of-n oblivious transfer and cut-and-choose technique.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 1997.11a
• /
• pp.378-383
• /
• 1997

D. Chaum은 RSA암호알고리듬을 이용한 은닉서명방법으로 전자현금시스템을 제안했다. 그러나 이 방법은 사용자가 은행으로부터 전자현금을 발행받을 때 cut-and-choose방법을 사용함으로써 큰 통신부하(communication overhead)를 가지는 비효율적인 면이 있다. 본 논문은 제비뽑기방법을 이용하여 cut-and-choose방법을 사용하지 않고 사용자의 프라이버시를 보호하는 새로운 전자현금시스템을 제안한다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.10a
• /
• pp.46-55
• /
• 2006

There are many kinds of braced cut wall methods as the sheet pile, SCW, CIP and slurry wall which is adoptable for a deep excavation construction in a coastal filled land. The braced cut wall which has a strong stiffness is very stable but it has the weak point that the construction cost is high. Thus when a braced cut wall is designed, the geotechnical engineers choose the braced cut wall which has more safe and economic in the consideration of surrounding buildings near the construction site. Especially, when the sheet pile method as a braced cut wall is cheesed, the layer order and consistence of a coastal deposit stratum are considered and the pile driving method is also considered. This paper introduces the case that the originally box-type sheet pile wall was changed to U-type and high strength material after the pilot test at the subway construction site in a coastal filled land. This paper also introduces the case that the sheet pile's driving method was changed to special method in the section of the temporary coffer dam which had made when the present coastal filled land was formed.

• The Korean Journal of Applied Statistics
• /
• v.9 no.2
• /
• pp.161-169
• /
• 1996

In the design of the sampling, it is important to make a decision about the size of the sample to be selected from the population. We often have a problem to get the optical size of the sample to be considered for cost and time expended for selecting sample unit from highly skewed population. In this case, we give a graphical criterion with Take-all Stratum rate to choose a method and also illustrate the efficiency between the Neyman allocation and the cut-off method with real data.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.3 s.32
• /
• pp.457-465
• /
• 1997

The Shape optimization makes it possible to reduce the weight of structure and cost then member sizing optimization. A vast amount of imprecise information is existed in constraints of the optimum design. It is very difficult and sometimes confusing to describe and to deal with the several criteria which contain fuzzy degrees of relatives importance. This paper proposed weighting strategies in the multiobjective shape optimization of fuzzy structural system by ${\alpha}$-cut approach. The algorithm in this research is numerically tested for 2-bar truss structure. The result show that. the user can choose the one optimum solution in practices as obtaining the optimum solutions according to the ${\alpha}$-cut approach, weight of volume and displacement.

• Journal of the Korean Regional Science Association
• /
• v.14 no.1
• /
• pp.109-126
• /
• 1998

We analysed the determinants of part-timer labor demand and supply in Kwangju. The findings of the paper are as follows; First, firms employ part-timer workers in the unskilled or skilled jobs not demanding much training cost. There are two reasons for firms to employ part-time workers: labor cost cut and flexible employment adjustment. Estimated wage differential is 40% not including fringe benefits differential. Second, we find lots of married women to want part-time jobs. The more probably married women choose part-time work, the younger and the less educated they are, and the less kids and the less other income they have.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.17 no.4
• /
• pp.75-88
• /
• 2007

Current electronic voting systems are not sufficient to satisfy trustworthy elections as they do not provide any proof or confirming evidence of their honesty. This lack of trustworthiness is the main reason why e-voting is not widespread even though e-voting is expected to be more efficient than the current plain paper voting. Many experts believe that the only way to assure voters that their intended votes are casted is to use paper receipts. In this paper, we propose an efficient scheme for issuing receipts to voters in an e-voting environment using the well-known cut-and-choose method. Our scheme does not require any special printers or scanners, nor frequent observations of voting machines. In addition, our scheme is more secure than the previous schemes.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.6 no.6
• /
• pp.72-85
• /
• 2003

The purpose of this study is to establish the basis of the ecological restoration on the limestone mines in Korea, through the research of the revegetation measures of the disturbed slopes in Japanese limestone mines and the analysis of the case of Ibuki and Bukou limestone mines to realize the restoration works successfully. According to the number of mines to carry out the revegetation works increase every year, the revegetation area and amount of planting also go on increasing in Japan. In the small mines the environmental problem is not recognized seriously, but some mines have muchly invested in the revegetation of the damaged land by mines. Ibuki mine in Shiga-gen is practicing the four principles for the restoring of the revegetation in the disturbed slopes by mines. Firstly, the mean slope preserves $37^{\circ}$ in the last rock cut slopes. Secondly, the last rock cut slopes to rehabilitate are covered with the soil dressing 30cm high. Thirdly, the grasses in the mining area are digged up beforehand, and then they are reused to the revegetation works of rock cut slopes. Lastly, from the upper rock cut slopes the revegetation works begin, the process of the above are repeated, as the result, the restoring works will be completed. Upon the ground of these principles, the complex of the original vegetation and the native species seeding, that is, the revegetation technique of Ibuki have established. In the difficult area to revegetate, sodding works, heaping up vegetation-sack, seed-spraying, heaping up soil-sacks and planting works are adapted variously. Bukou mine in Saitama-gen try to maintain the revegetation, the screening and the stability of the enormous mining rock cut slope, and for these works, the activity of 'Chichibu Working Group of Rock Wall for Limestone Mines' contributes largely. The chief technique of the revegetation in Bukou mine is following; after the making the berm on the rock cut slopes, the soil dressing is filled in it, and the trees is planted for the screening of the rock cut slopes. They devide the rock cut slopes into four typical types, and choose the different ways to make the berm and fill the soil dressing in characteristic. Most of the planting trees are consist ofthe native species of Mt. Bukou through the stages of the nursery and transplantation. Not only the revegetation of the demaged land but also the breeding of the conservational plants also are their important business.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.192-197
• /
• 2002

In this study, examined the cutting characteristics of alumuminum alloy AC8A-T6 that is used to present car piston materials. And in been holding materials machining empirically escape as result that experiment comparison changing the cutting speed and feed on various condition to choose efficient machining condition. The following results can be summarized from this research. 1. As the cutting speed decreased, principal cutting force and thrust cutting force is increased, and reason that cutting force interacts greatly in the low cutting speed is thought by result by BUE's stabilization. 2. The feed speed and cutting speed increase, friction factor is decrescent and the cause appeared the thrust cutting force is fallen than cutting force relatively because chip flow according to increase of the feed rate is constraint. 3. Though specific cutting resistance grows cutting area and the feed rate are few, the cause was expose that shear angle decreases by rake face of tool gets into negative angle remarkably as wear of a cutting tool or defect part of workpiece is cut. 4. Cutting speed do greatly depth of cut is slow, surface roughness examined closely through an experiment that becomes bad, and know that it can get good surface that process cutting speed because do feed rate by 0.1mm/rev low more than 250m/min to get good surface roughness can.

• Food Science of Animal Resources
• /
• v.37 no.5
• /
• pp.682-689
• /
• 2017

The aim of this study was to investigate the digestibility of different Korean Hanwoo beef cuts using an in vitro digestion model, in vitro physicochemical upper gastrointestinal system (IPUGS). The four most commonly consumed cuts - tenderloin, sirloin, brisket and flank, and bottom round - were chosen for this study. Beef samples (75 g) were cooked and ingested into IPUGS, which was composed of mouth, esophagus, and stomach, thereby simulating the digestion conditions of humans. Digested samples were collected every 15 min for 4 h of simulation and their pH monitored. Samples were visualized under a scanning electron microscope (SEM) to examine changes in the smoothness of the surface after digestion. Analysis of the amino acid composition and molecular weight (MW) of peptides was performed using reverse-phase high performance liquid chromatography and sodium dodecyl sulfate polyacrylamide gel electrophoresis, respectively. Following proteolysis by the gastric pepsin, beef proteins were digested into peptides. The amount of peptides with higher MW decreased over the course of digestion. SEM results revealed that the surface of the digested samples became visibly smoother. Total indispensable and dispensable amino acids were the highest for the bottom round cut prior to digestion simulation. However, the total amount of indispensable amino acids were maximum for the tenderloin cut after digestion. These results may provide guidelines for the elderly population to choose easily digestible meat cuts and products to improve their nutritional and health status.