• Journal of the Korean Society of Radiology
• /
• v.10 no.8
• /
• pp.645-652
• /
• 2016

In this study, based on the analysis of texture feature values of statistical properties. And we examined the normal and the applicability of the computer-aided diagnosis of cerebral infarction in the brain computed tomography images. The experiment was analyzed to evaluate the ROC curve recognition rate of disease using six parameters representing the feature values of the texture. As a result, it showed average mean 88%, variance 92%, relative smoothness 94%, uniformity of 88%, a high disease recognition rate of entropy 84%. However, it showed a slightly lower disease recognition rate and 58% for skewness. In the analysis using ROC curve, the area under the curve for each parameter indicates 0.886 (p = 0.0001) or more, resulted in a meaningful recognition of the disease. Further, to determine the cut-off values for each parameter are determined to be the prediction of disease through the computer-aided diagnosis.

• The KIPS Transactions:PartA
• /
• v.16A no.2
• /
• pp.79-88
• /
• 2009

In boundary scan architecture, test stimuli are shifted in one at a time and applied to the on-chip system logic. The test results are captured into the BSR and are examined by subsequent shifting. In this paper, we developed a continuous capture test architecture and test procedure using TPG based on boundary scan is used to performance test. In this architecture, test patterns of TPG are applied to CUT with system clock rate, and response of CUT is continuously captured by CBSR(Continuous Capture Boundary Scan Register) at the same rate and the captured results is shifted to TDO at the same rate. The suggested a continuous capture test architecture and test procedure is simulated by Altera Max+Plus 10.0. The simulation results shows the accurate operation and effectiveness of the proposed test architecture and procedure.

• Journal of Animal Science and Technology
• /
• v.63 no.1
• /
• pp.180-190
• /
• 2021

This study aimed to determine the carcass and meat quality of broiler chickens based on the slaughter age (28, 30, 32, and 34 days). The carcass characteristics included live and carcass weights, carcass rate, dressing rate, and retail cut weight. The meat quality properties were determined through proximate composition, pH, color, water holding capacity (WHC), cooking yield, and shear-force. The broiler chicken live, carcass, breast, thigh, and wing weights significantly increased with the slaughter age (p < 0.05); the tenderloin weight also exhibited a similarly increasing trend. However, the carcass rate of the day 28 sample was significantly lower than the other samples (p < 0.05). The protein and ash contents of the breast exhibited an increasing trend with increasing slaughter age. The protein content of the thigh of the day 28 sample was significantly lower than that of the other samples (p < 0.05), while the ash contents of the day 28 and 30 samples were significantly lower. The redness of the breast showed an increasing trend, and the pH and lightness of the thigh exhibited a decreasing trend with slaughter age. The WHC and cooking yields of the day 30 and 32 breast and thigh samples were significantly higher than those of the day 28 and 34 samples (p < 0.05). The breast and thigh shear-force of the day 30-34 samples were significantly higher than those of the day 28 sample (p < 0.05). The present study showed that even with a twoday difference in slaughter age, the broiler chicken meat quality showed a significant difference in several characteristics.

• Tunnel and Underground Space
• /
• v.32 no.4
• /
• pp.272-284
• /
• 2022

This study conducted tunnel blasting to evaluate the blasting effect of a shear thickening fluid-based blasting stemming material and a sealed plug device under development. STF single stemming and STF stemming materials were combined with plugs to a tunnel blasting to which the SAV-Cut method was applied, and the advanced rate and fragmentation of tunnel blasting muck pile were compared when sand stemming was used. Tunnel advanced rate was evaluated using a 3D laser scanner. When the STF stemming material and STF stemming material with the plug were compared to the sand stemming material, it increased by 5.7 and 5.36%, respectively. As a result of evaluation of the fragmentation of tunnel blasting muck pile, it was the best when the STF stemming material was applied, and it decreased by about 61% compared to the case of sand stemming blasting. However, no significant improvement in blasting effect was observed with the application of plug devices.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.8 no.1
• /
• pp.21-29
• /
• 2006

When apples are picked or selected by grader, the rate of wound occurrence on the skin by apple stalk is remarkably high if the apple was bigger than 3 size during the harvest time. Except this case, the other sizes showed very little similarity. The crop of apple per 1 minute was 2.9kg without cutting fruit stalk, whereas only 1.1kg of the apples were obtained due to cutting the fruit stalk. Thereby, the harvesting without cutting fruit stalk is highly effective in terms of productivity rather than cutting the fruit stalk. As far as the wound occurrence rate on apple skin by apple stalk of distance between grader's dish and accumulated board is concerned, the grader which has no distance showed quite low rate of wound occurrence compared with those grader with 3cm or 8cm distance. When the apple was being stored, there was no difference in firmness between the cut stalk apple and the uncut stalked apple, however there was slightly more weight loss in the cut stalk apple than uncut stalk apple.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.18 no.3
• /
• pp.171-178
• /
• 1998

This experiment was conducted to study on forage utility of Diplachne fusca L. which live in reclaimed saline land of midwest region of Korea. The primary experiment was conducted to know on germination characteristics of Diplachne fusca L. according to storage condition after seed harvesting, light, temperature, flooding depth, salinity and soil covering. The results obtained are summarized as follows; 1. The germination percentage, average days to germination, germination rate and coefficient of germination were not different in existence of light, combination with existence of light and storage condition, but those were higher different in storage condition. 2. The germination characteristics were more higher on the condition of alternating temperature than constant temperature, and it was the highest on the condition of alternating temperature with $35/25^{\circ}C$ and constant temperature with $35^{\circ}C$. 3. There were apparently significant in germination percentage, average days to germination, germination rate and coefficient of germination according to flooding depth. The germination characteristics of D. fusca L. were the highest on the wndition of flooding depth with Ocm and did not germinate on the condition of flooding depth more than 3cm. 4. There were apparently significant in germination percentage, average days to germination, germination rate and coefficient of germination according to salinity. Germination characteristics were the highest on the condition of salinity with 0.2%. There was more than 30% of germination percentage on the condition of salinity with 1% SO Diplachne fuaca L. was suitable to cultivate in reclaimed saline land. 5. The germination percentage, average days to germination, germination rate and coefficient of germination were significantly difference between soil covering. So Germination characteristics were the highest on the condition of soil covering with 0.2cm. But they scarcely germinated on the condition of more than 1cm of the soil covering.

• Food Science and Preservation
• /
• v.19 no.5
• /
• pp.633-638
• /
• 2012

The aim of this study was to investigate the growth of aerobic bacteria in fresh-cut salad during short-term temperature abuse ($4{\sim}30^{\circ}C$temperature for 1, 2, and 3 h) for 72 h and to develop predictive models for the growth of total viable cells (TVC) based on Predictive food microbiology (PFM). The tool that was used, Pathogen Modeling program (PMP 7.0), predicts the growth of Aeromonas hydrophila (broth Culture, aerobic) at pH 5.6, NaCl 2.5%, and sodium nitrite 150 ppm for 72 h. Linear models through linear regression analysis; DMFit program were created based on the results obtained at 5, 10, 20, and $30^{\circ}C$ for 72 h ($r^2$ >0.9). Secondary models for the growth rate and lag time, as a function of storage temperature, were developed using the polynomial model. The initial contamination level of fresh-cut salad was 5.6 log CFU/mL of TVC during 72 h storage, and the growth rate of TVC was shown to be 0.020~1.083 CFU/mL/h ($r^2$ >0.9). Also, the growth tendency of TVC was similar to that of PMP (grow rate: 0.017~0.235 CFU/mL/h; $r^2=0.994{\sim}1.000$). The predicted shelf life with PMP was 24.1~626.5 h, and the estimated shelf life of the fresh-cut salads with short-term temperature abuse was 15.6~31.1 h. The predicted shelf life was more than two times the observed one. This result indicates a 'fail safe' model. It can be taken to a ludicrous extreme by adopting a model that always predicts that a pathogenic microorganism will grow even under conditions so strict as to be actually impossible.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.10
• /
• pp.27-33
• /
• 2019

The aviation industry has grown beyond the simple processing and assembling of aircraft parts and now designs and exports finished aircraft. In this study, the vertical CNC milling rotational speed and feed rate were parameters to investigate the life of tools according to their shape: (flat, round, and ball end mill) in the rough cutting of titanium. These tools are widely used in aircraft manufacturing and assembly. The purpose of this study is to measure the cutting temperature generated during the cutting process and calculate the rate of tool wear. This will be accomplished by measuring the tool weight before and after cutting the specimen and to compare it with the results of previous studies. Our study showed that the maximum cutting temperature increased as cutting time, tool rotational speed, and feed rate increased. The highest cutting temperatures were recorded for the ball, round, and flat end mill, respectively. Tool wear for the ball, round, and flat end mill increased as the speed and feed rate increased. The flat end mill exhibited the highest rate of wear from a minimum of 0.62% to a maximum of 2.88%.

• Korean Journal of Weed Science
• /
• v.7 no.3
• /
• pp.329-336
• /
• 1987

Antagonistic interaction between glyphosate and some herbicides in effects of post-emergence application on cut grass and of pre-emergence application on some weed species including barnyardgrass was evaluated with pots in plastic house. By addition of oxyfluorfen to glyphosate, the weeding efficacy on cutgrass was visually evaluated as promotive in both weeding rate and efficacy. However, by alachlor, simazine, gluphosinate or quizalofop-ethyl showed delayed weeding rate, and by paraquat, the promotive in rate but lower in efficacy, respectively. Fresh weights of cutgrass at 30 days after the lower-rate application has generally indicated the lower weeding efficacy than that from glyphosate alone. Even at higher rate application, the addition of alachlor or simazine to glyphosate has still indicated the lower efficacies. As a result of interaction analysis by Colby method, no synergism was detected from any treatments, and the combinations of simazine or paraquat to glyphosate in lower mixing rate showed significant antagonism at 5% probability level of DMRT. On the annual weed species including barnyardgrass, the significant soil-residual weeding efficacies were recognized by addition of any rate of oxyfluorfen, alachlor, simazine and higher rate of quizalofop-ethyl to glyphosate, respectively.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.102-106
• /
• 1996

In the ball end-milling process of a 3-dimensional mold, it is important to select cutting conditions and tool path considering the geometrical shape of a workpiece to reduce machining time. In this study, experiments were performed to decide allowable feed rate not breaking stability of system for different geometrical shapes. It was found that downcut is more stable than upcutting in machining side wall and downward is preferable to upward in inclined part depending on the angle of the inclination and depth of cut.