• International Journal of Highway Engineering
• /
• v.16 no.6
• /
• pp.87-93
• /
• 2014

PURPOSES : To evaluate the feasibility of cut waste fishing net as a reinforced fiber for concrete. METHODS : Strength characteristics of fiber reinforced concrete using waste fishing net were investigated. The cut waste fishing nets with 4~5cm length were putted into the soil-cement and cement concrete for pavement slab. RESULTS : Compression and tensile strength of fiber reinforced concrete using waste fishing net were increased. CONCLUSIONS : It was concluded that cut waste fishing net can be used as a reinforced fiber for cement concrete. However, sometimes using cut waste fishing net leads to decrease the strength; therefore, further researches are needed for real project.

• The Research Journal of the Costume Culture
• /
• v.11 no.6
• /
• pp.967-971
• /
• 2003

As the concerns over health increased in 1990's, research and development on the health material were also activated. The development of UV-cut textile became the hot issue, because the damage of W irradiation due to ozone depletion has become widely known. UV-cut effect is determined by the material, the color, the organization and the density of UV-cut fibers. UV-cut effect is very different according to the fibers. Polyester is known to have a better effect. Even in the same textile material, staple fiber has more effect than filament fiber. Different colors have different offsets. Although textiles have the same color, the effects can be different according to the depth of color. PET, PET/cotton blend, nylon and cotton fabrics were ultraviolet cutting finished with padding method using several absorbers. These UV-cut effect can be improved through the processing. Safety of UV-cut textile for the body must be considered future, Until now the figure of the UV-cut effects has been emphasized. There has been no experiment on the human body, although the textiles are directly on the human body. Futhermore there os no safety standard of UV-cut textiles. Therefore every effort will be made to set the standard UV-cut processing is established. The need of UV-cut products will be known to the consumers.

• The tire
• /
• s.81
• /
• pp.2-12
• /
• 1979

요지:특수하게 처리한 Cellulose Fiber를 고무에 배합함으로써 배합고무의 기계적 성질을 향상시킬 수 있다. 즉, 소량의 Cellulose Fiber를 천연고무 또는 합성고무에 배합하여 배합고무의 내절상(Cut)성장, 내 Chipping성을 향상시킬 수 있다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.693-698
• /
• 2008

For designing intensity modulation type optical microphone, the irradiance distribution which can be applied to inclined-cut geometrical configuration is suggested. The model is important in analysis of response characteristics f3r intensity modulation type optical microphone. To overcome low sensitivity problem in intensity modulation type optical microphone, inclined-cut optical fiber is considered here. Based on optical geometry, the inclined-cut optical fiber sensor is designed and fabricated. The experiments are carried out to evaluate sensor performance.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.12
• /
• pp.1270-1277
• /
• 2008

For designing intensity modulation type optical microphone, the irradiance distribution which can be applied to inclined-cut geometrical configuration is suggested. The model is important in analysis of response characteristics for intensity modulation type optical microphone. To overcome low sensitivity problem in intensity modulation type optical microphone, inclined-cut optical fiber is considered here. Based on optical geometry, the inclined-cut optical fiber sensor is designed and fabricated. The experiments are carried out to evaluate sensor performance.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.5
• /
• pp.14-20
• /
• 2012

In this paper, the flame-retardant wall paper was successfully prepared with recycled polyethylene terephthalate (PET) short cut fiber with flame-retardant property and wood pulp using polyvinyl alcohol (PVA) as binder followed by treatment of non-halogen flame retardant. Physical properties such as formation index, tensile strength, elongation, and burst strength increased as defibrillation increased except tear strength. Bulk increased but formation index, tensile strength, elongation and burst strength decreased along with addition of PET short cut fiber. It was also found that tear strength rose significantly up to 30% of PET short cut fiber and then declined (fell) rapidly. As addition level of PVA increased tensile strength, elongation and burst strength increased, but tear strength decreased slightly. Addition of 20% of PET short cut fiber and 13% of PVA provided the flame-retardant wall paper with both improved flameproofing and physical properties.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.2
• /
• pp.264-268
• /
• 1986

A thchnique has been studied for the measurement of the spectral loss and the cut-off wave length, at which the first high-order mode disappears. The near-field patterns of a fiber which is excited by a variable wavelength source are used for the measurement of cut-off wavelength. Because of the absorptive phenomenon of OH- molecular vibration, spectral loss of a single mode optical fiber sample is 5.6dB/km at 1380 nm wavelength and 1dB/km at 1240 nm wavelength. From the near field intensity patterns and the mode field diameter graph for the half power width, the cut-off wavelength of the fiber is measured to be 1120 nm.

• Elastomers and Composites
• /
• v.54 no.2
• /
• pp.91-96
• /
• 2019

The purpose of this study was to examine the effect of different yarn twisting methods on physical properties. Plain single jersey structured fabrics were knitted from Kevlar yarn, and from Kevlar/HPPE, and from Kevlar/Basalt fiber, and from Kevlar/Glass fiber and Kevlar/Stainless steel fiber blended and core-spun yarns. and then, The fabrics were coated NBR Latex. The physical properties, including tear strength, modulus, degree of penetration, heat resistance, and cut resistance of the knitted fabrics were investigated and compared. Kevlar/HPPE blended yarn fabrics recorded the highest heat resistance (13 Sec.). and Kevlar/HPPE blended yarn fabrics had good cut resistance (Cut Level 4).

• Korean Journal of Organic Agriculture
• /
• v.9 no.1
• /
• pp.37-49
• /
• 2001

This experiment was carried out to investigate the effects of application levels of nightsoil sludge compost(NSC) in 3 and 4 cuttings per annum on the dry matter yields and nutritive value of orchardgrass(Dactylis glomerata L.). Annual nightsoil sludge compost(NSC) were applied at levels of 0, 10, 20, 40 and 80 ton $㏊^{respectively}$ . Relative yields of each cut to annual dry matter yield were 29.9%, 46.% and 23.2% for 1st cut, 2nd cut and 3rd cut in 3 cutting system, 23.7%, 29.3%, 34.0% and 13.0% for 1st cut, 2nd cut, 3rd cut and 4th cut in 4 cutting system, respectively. Significantly higher dry matter yield of orchardgrass obtained were 8.11 ton $㏊^{-1}$ at level of 40 ton ㏊$^{-1}$ $yr^{-1}$ in 3 cutting systems, ranges of 7.50~10.71 ton $㏊^{-1}$ at level of 10~80 ton ㏊$^{-1}$ $yr^{-1}$ in 4 cutting systems than those of non application level of NSC, respectively(p〈0.05). The mean efficiency of dry matter production to application of NSC(kg DM/ton NSC) were 46 and 102 kg in 3 and 4 cutting systems, respectively. Although th contents of crude protein(CP, %) of orchardgrass were significantly higher at the application levels of 10~80 ton $㏊^{-1}$ $yr^{-1}$ -1/ by NSC than those of the application levels at the 0 ton $㏊^{-1}$ $yr^{-1}$ in 3 and 4 cutting systems(p〈0.05), the contents of neutral detergent fiber(NDF, %) and acid detergent fiber(ADF, %) were lower in NSC plots than those at the non-application plots of NSC. The contents of total digestible nutrient(TDN, %) and relative feed value(RFV) of orchardgrass were significantly increased with increase the applicaton levels of NSC(p〈0.05).

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.4
• /
• pp.644-650
• /
• 2012

This paper show the 2kW fiber laser cutting properties of SS400. The study was comparison of traditional 4kW $CO_2$ Laser cutting and 2kW Fiber laser cutting characteristics for the application of Industrial 2D Laser Cutting Machine. The laser used in this investigation was an IPG YLU-2000 multi-mode Ytterbium Fiber machine with a maximum power of 2000W and a wave length of 1070 nm. The laser was used in its Continuous Wave (CW) mode with an approximately top hat beam intensity distribution. Fiber laser high quality cuts at a large range of speeds (ranging from 2000 to 3800 mm/min) which has been obtained for the 2.3mm Sheet of SS400. 2kW power Fiber laser cut was able to max. 20mm sheets of SS400 (speed range from 650 to 850 mm/min). Fiber laser cutting used in conventional hole nozzle could cut 12mm SS400 but used in special dual cutting nozzle could cut 20mm SS400.