• Structural Engineering and Mechanics
• /
• 제39권4호
• /
• pp.521-539
• /
• 2011

Jilin highway concrete bridge is located in the center of Jilin City, which is positioned in the middle part in Jilin Province in the east north of China. This bridge crosses the Songhua River and connects the north and the south of Jilin City. The main purpose of damages inspection of the bridge components is to ensure the safety of a bridge and to identify any maintenance, repair, or strengthening which that need to be carried out. The damages that occur in reinforced concrete bridges include different types of cracks, scalling and spalling of concrete, corrosion of steel reinforcement, deformation, excessive deflection, and stain. The main objectives of this study are to inspect the appearance of Jilin highway concrete bridge and describe all the damages in the bridge structural members, and to evaluate the structural performance of the bridge structure under dead and live loads. The tests adopted in this study are: (a) the depth of concrete carbonation test, (b) compressive strength of concrete test, (c) corrosion of steel test, (d) static load test, and (e) dynamic load test. According to the damages inspection of the bridge structure appearance, most components of the bridge are in good conditions with the exception arch waves, spandrel arch, deck pavement of new arch bridge, and corbel of simply supported bridge which suffer from serious damages. Load tests results show that the deflection, strain, and cracks development satisfy the requirements of the standards.

• 한국수소및신에너지학회논문집
• /
• 제25권4호
• /
• pp.443-448
• /
• 2014

This paper describes thermal flow characteristics in various pipelines: straight pipeline and curved pipeline. In the permafrost area, pipelines are exposed to an extremely low temperature ($-40^{\circ}C$). In this situation, three-dimensional flow analysis should be analyzed to investigate thermal effects such as pressure drop, temperature change, velocity deficit and distribution change of liquid droplet of internal fluid. In this paper, multi-phase and multi-species analysis was introduced to analyze the flow characteristics of permafrost pipelines on the vertical support members above ground.

• 한국농촌건축학회논문집
• /
• 제21권3호
• /
• pp.33-40
• /
• 2019

Woolyang(月梁) is a beam which whole shape is curved like a so-called moon(月). According to the ${\ll}$Yeongjobeosig(營造法式)${\gg}$, In the case of beams installed under the ceiling of a wooden building, it is used by manufacturing them in Woolyang(月梁) for maximum visual decorative effects as the shape is exposed. In order to achieve the end of a beam that is manufacturing in Woolyang(月梁), it is important to process it in a suitable size and shape for a given situation to achieve a combination with other members around it. However, in the "營造法式", the standard of production of the Woolyang(月梁) is divided into Myeongbog(明?), Chagyeon(箚牽), Pyeonglyang(平梁), and the height of each beam head is divided into 21分$^{\circ}$, 15分$^{\circ}$, 25分$^{\circ}$, but it is not possible to look at any more specific reference. In this paper, try to consider the principle of Woolyang(月梁) manufacturing and its normative contents which were indirectly proposed in the ${\ll}$Yeongjobeosig(營造法式)${\gg}$.

• Earthquakes and Structures
• /
• 제23권1호
• /
• pp.13-21
• /
• 2022

Masonry constructions exhibit uncertain behaviors under dynamic effects such as seismic action. Complex issues arise in the idealization of structural systems of buildings having different material types and mechanical properties. In this study, the structural behavior of a vaulted masonry building constructed using full clay brick and lime-based mortar and sitting on consecutive arches was investigated by experimental and numerical approaches. The dimensions of the structure built in the laboratory were 391 × 196 cm, and its height was 234 cm. An incremental repetitive loading was applied to the prototype construction model. Along the gradually increasing loading pattern, the load-displacement curves of the masonry structure were obtained with the assistance of eight linear displacement transducers. In addition, crack formation areas, and relevant causes of its formation were determined. The experimental model was idealized using the finite element method, and numerical analyses were performed for the area considered as linear being under similar loading effect. From the linear analyses, the displacement values and stress distribution of the numerical model were obtained. In addition, the effects of tie members, frequently being used in the supports of curved load-bearing elements, on the structural behavior were examined. Consequently, the experimental and numerical analysis results were comparatively evaluated.

• 소성∙가공
• /
• 제32권4호
• /
• pp.221-227
• /
• 2023

While tube bending is a conventional forming technique, it is still used to make curved products for load-bearing members or aesthetically pleasing parts in various manufacturing industries such as automotive, aerospace, and others. Whole or local deformation of the final product such as springback, distortion, or local buckling are of interest in metal forming or precision manufacturing. In this paper, the factors affecting the cross-sectional deformation are explored. A 5-axis stretch bending machine was used for two-dimensional bending with extruded AA6082-T4 rectangular tubes. Three different bending sequences were employed: stretch before bending, stretch after bending, simultaneous bending and stretch. Furthermore, by considering both the stretch and bending angle, cross-sectional deformation was also analyzed. It was observed that employing stretch bending techniques can effectively reduce cross-sectional deformation and contribute to overall quality enhancement. Through this study, it was revealed that these factors have an impact on the cross-sectional deformation of the tubes.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.25-26
• /
• 2023

Free-form buildings serve as landmarks, and interest and demand are increasing. However, in the case of free-form concrete members, different curved surfaces are required depending on the location where they are used, and the formwork is custom-made and used. Concrete is poured into the manufactured formwork to produce FCP (Free-form Concrete Panel). However, since it is an atypical building that requires precise curvature, compaction cannot be performed after concrete is poured. This leads to the occurrence of bughole, which reduce the strength and aesthetics of concrete. Therefore, in this study, we intend to conduct basic experiments to develop a magnetic compaction device that can be used for FCP. As a result of the experiment, it was confirmed that the bug hole was improved when the magnetic compaction device was applied, and there was no significant difference in compressive strength and flexural strength. This technology can be used in the field of Free-form concrete where it is difficult to perform compaction work, and it is expected to be used as a basic research related to technology for new automatic compaction.

• 한국산학기술학회논문지
• /
• 제19권9호
• /
• pp.333-340
• /
• 2018

최근 비정형 건축구조물은 건설 산업의 디지털화로 인해 점점 더 복잡한 형상으로 디자인되고 있다. 특히, 외관 및 내부 구성요소들의 단면이 자유롭게 변화되는 곡선 및 곡면의 형태를 띠고 있으며, 그로 인해 곡률을 가진 구조부재들이 빈번히 나타나고 있다. 이러한 구조물의 모형을 작성하고 안정성을 평가를 하는데 있어, 고전적 방식의 유한요소 해석기법이 적용된 상용프로그램들은 신속한 형상 모델링이 불가능하여 생산성 저하를 초래하고 있다. 따라서 본 연구에서는 선행연구를 통해 개발된 구조해석 통합시스템을 확장하여 비정형 외피 형상을 신속하게 모델링하고, 그 결과물을 이용하여 외피를 구성하는 프레임 구조를 자동으로 생성할 수 있는 전후처리 모듈을 개발하였다. 본 연구에서 개발된 전후처리 모듈은 스플라인 곡선 및 곡면의 세분화 알고리즘을 적용하여 NURBS곡면의 형상정보를 통해 해석요소를 자동으로 생성하고, 해석 후의 변형 형상을 보다 현실적으로 가시화 시킬 수 있도록 개발되었다. 본 연구를 통해 개발된 전후처리 모듈은 복잡한 곡면 형상을 신속하게 구축하고, 그에 따른 하부 골조시스템의 해석모형을 자동으로 생성할 수 있어 향후 비정형 건축물 설계의 생산성 향상에 기여할 수 있을 것으로 판단된다.

• 한국산학기술학회논문지
• /
• 제20권6호
• /
• pp.210-218
• /
• 2019

최근 미관과 독창성을 위해서 과감하고 실험적인 형상을 적용한 사장교가 시도되고 있다. 기존에 유사한 사례가 없는 교량의 경우 해석 모델링에 대한 깊은 고민과 검증이 필요하다. S자형 곡선 보도사장교는 역삼각형 트러스 보강거더의 편측에 1면으로 케이블이 배치되어 상시 비틀림이 발생한다. 비틀림 억제를 위해서 중앙 하현재에 배치한 받침을 기준으로 좌, 우측의 상현재에 링크슈를 배치하였다. 첫 번째 연구는 링크슈의 모델링 방법과 격벽 모델링 유무에 관한 것이다. 지점부 횡방향 구조계와 비틀림 강성을 정확히 반영하기 위해서 받침의 회전강성을 이용하는 간접적인 방법이 아닌 링크슈와 격벽을 직접 모델링하는 것이 필요하였다. 두번째 연구는 압축전담 요소인 받침과 인장전담 요소인 링크슈의 횡방향 배치방법에 관한 것이다. 방법1은 곡선반경 외측에서부터 링크슈, 받침, 링크슈의 순서로 배치하는 것이고, 방법2는 받침, 받침, 링크슈로 배치하는 방법이다. 방법2는 방법1과 비교하여 외측 상현재의 응력은 커지고 내측 상현재의 응력은 감소하였다. 받침과 링크슈의 횡방향 배치방법에 따라 상현재의 응력 조정이 가능한 것으로 분석되었다.

• 콘크리트학회논문집
• /
• 제21권1호
• /
• pp.105-116
• /
• 2009

철근콘크리트구조는 경제성이 뛰어나 가장 널리 사용되는 부재이지만, 인장응력에 취약하고 콘크리트의 자중이 커서 처짐 제어가 어려운 단점이 있다. 이에 비해 프리스트레스트 콘크리트구조는 콘크리트구조의 단점을 극복할 수 있는 효율적인 방법으로 긴장재의 배치 형태와 긴장재량에 따라서 부재의 처짐을 제어할 수 있다. 프리스트레스 보강된 부재에서 긴장재 변곡점의 위치는 부재의 처짐 제어 및 모멘트 감소 효율을 크게 할 수 있는 형태로 설치되어야 한다. 따라서 이 연구에서는 연속부재에 설치되는 긴장재의 경계조건을 만족시키는 긴장재의 곡선식을 다항식으로 유도하고, 자연적인 곡선 형상을 유지할 수 있는 임의의 변곡점 위치에 따른 긴장재의 곡선식을 통하여 긴장력의 수직 분력을 계산하였다. 또한, 유도된 고차항을 가진 수직분력식을 등가의 등분포 하중으로 변환하여 처짐 산정시 적용성을 높였으며, 연속 슬래브에서 긴장재가 배치되어있을 경우 기둥열에서부터 긴장재까지 떨어진 거리에 따라 처짐 및 모멘트에 대한 긴장재의 영향을 반영하였다. 제안된 방법으로 긴장재가 없는 슬래브와 긴장재로 보강된 경우에 대한 처짐을 계산하여 적용성을 검토하였으며, 긴장재에 의한 처짐 제어 효과를 정량적으로 산출하였다.

• ALGAE
• /
• 제32권3호
• /
• pp.171-179
• /
• 2017

The strictly freshwater red algal order Batrachospermales has undergone numerous taxonomic rearrangements in the recent past to rectify the paraphyly of its largest genus Batrachospermum. These systematic investigations have led to the description of new genera and species as well as re-circumscription of some taxa. Specimens collected from two locations in the southeastern USA were initially identified as being allied to Batrachospermum sensu lato, but could not be assigned to any recognized species. Representative rbcL (plastid) and COI-5P (mitochondrion) sequences showed these specimens to be similar to each other and not closely matching the previously published sequence data for other Batrachospermum taxa. Comparison of sequence variation and morphology with a broader range of batrachospermalean taxa resulted in the proposal of a new monotypic genus Lympha mucosa gen. et sp. nov. to accommodate these specimens. Lympha mucosa is sister to members of a newly described genus Volatus, but the two genera are easily distinguished based on straight versus curved, twisted or spirally coiled carpogonial branch, respectively. This new taxon has morphological similarities to Batrachospermum sections Turfosa and Virescentia, but can be differentiated based on genetic divergence in rbcL and COI-5P as well as a combination of morphological characters: dense, compressed whorls, axial carposporophytes with a single type of gonimoblast filament; cortication of the main axis closely appressed; and short, straight carpogonial branch arising from the pericentral cell and carpogonia with unstalked, lanceolate trichogynes. This new taxon adds to the freshwater red algal diversity of the southeastern USA, a region already known for biodiversity and high endemism of the aquatic flora and fauna. It is also a relevant new addition to the taxonomic knowledge of the freshwater red algal Batrachospermales.