• International Journal of Precision Engineering and Manufacturing
• /
• v.3 no.4
• /
• pp.15-23
• /
• 2002

With the development of a laser scanner of high precision and increased speed, reverse engineering becomes a key approach to reduce the time for the development of new products. But the modeling process is not so automated enough until now. Modeling in real workshops is usually performed by the experienced operators and it requires a skillful technique to get the resultant surface of high quality and precision. In this paper, a systematic solution is proposed to automate the free-form surface generation from the measured point data. Compatibility is imposed to the measured point data during input curve generation. And the compatibility of cross-sectional curve is also considered for the loft surface generation. The data in each step is produced in IGES file format to make an easy interface to other CAD/CAM software without any further data manipulation.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.397-398
• /
• 2023

To design the shear connections for vertical construction joints of slurry walls, it is necessary to create a force-displacement curve that represents the structural performance of the shear connections. This paper proposes a method for preparing the force-displacement curve of the shear connections including major considerations.

• International Journal of CAD/CAM
• /
• v.5 no.1
• /
• pp.11-18
• /
• 2005

The traditional method of manipulation of knots and degrees gives poor quality of surface, if compatibility of input curves is not good enough. In this work, a new algorithm of multiple refitting of curves has been developed using minimum energy based formulation to get compatible curves for skinning. The present technique first reduces the number of control points and gives smoother surface for given accuracy and the surface obtained is then skinned by compatible curves. This technique is very useful to reduce data size when a large number of data have to be handled. Energy based technique is suitable for approximating the missing data. The volumetric information can also be obtained from the surface data for analysis.

• Korean Journal of Computational Design and Engineering
• /
• v.4 no.1
• /
• pp.32-42
• /
• 1999

Approximate lofting or skinning is one of practical surface modeling techniques well used in CAD and reverse engineering applications. Presented in this paper is a method for approximately lofting a given set of curves wihin a specified tolereance. It is based on refitting input curves simultaneously on a common knot vector and interpolating them to get a resultant NURBS surface. A concept of reducing the number of interior knots of the common knot vector is well adopted to acquire more compact representation for the resultant surface. Energy minimization is newly introduced in curve refitting process to stabilize the solution of the fitting problem and get more fair curve. The proposed approximate lofting provides more smooth surface models and realizes more efficient data reduction expecially when the parameterization and compatibility of input curves are not good enough. The method has been successfully implemented in a new CAD/CAM product VX Vision? of Varimetrix Corporation.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.269-271
• /
• 2005

EMV was formed in February 1999 by Europay International, MasterCard International and Visa International to manage, maintain and enhance the EMV Integrated Circuit Card Specifications for Payment Systems as technology advances and the implementation of chip card programs become more prevalent. The formation of EMV ensures that single terminal and card approval processes are developed at a level that will allow cross payment system interoperability through compliance with the EMV specifications. A credit card environment of the domestic market adopted the standard Local-EMV to have the compatibility with EMV international standard and the EMV migration have been carried out b,# the step-by-step process. It may be possible to adopt various kinds of cryptographic algorithms, however, RSA public key algorithm is currently used. In this paper, as a public key algorithm for the authentication process, Elliptic Curve Cryptographic algorithm is applied to the EMV process. Implementation results is shown. and the possible changes necessary to accommodate Elliptic Curve Cryrtography is proposed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.105-110
• /
• 2002

This paper proposes an analytical method to predict the behavior of reinforced concrete beams subjected to reversed cyclic loading. The proposed method is based on the compatibility aided truss model and adopts the stress vs. strain curve of concrete which considers the softening effects. This model Is verified by comparing to the six reinforced concrete panel tests.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.1580-1587
• /
• 2005

To calculate the long-term allowable strength of geosynthetic reinforcement, replacement method was recommended. The isochronous creep curve by S. Turner was used to define the relation between creep strain and allowable strength. In isochronous curve at given time, one can read the allowable strength at allowable creep strain. The allowable strain gets from specification by directors or manufacturers according to the allowable displacement of reinforced structures. The allowable strength can be determined in relation to the allowable horizontal displacement each structures case by case. The effect of install damage on isochronous behaviors of geosynthetic reinforcement was little. In previous study, install damage increase the creep strain slightly. And the degradation was not identified. But it is supposed that degradation increase the creep strain. In conclusion, The recommended model to determine long-term allowable strength of geosynthetic reinforcements considering tensile deformation of reinforcement and soil is fit for proper, correct and economic design for reinforced earth walls.

• Korean Journal of Clinical Pharmacy
• /
• v.31 no.2
• /
• pp.125-135
• /
• 2021

Background: Generally, pharmacokinetics (PK) models could be stratified into two models. The compartment PK model uses the concept of simple compartmentalization to describe complex bodies, and the physiologically based pharmacokinetic (PBPK) model describes the body using multi-compartment networking. Notwithstanding sharing a theoretical background in both models, there was still a lack of knowledge to enhance compatibility in both models. Objective: This study aimed to evaluate the compatibility among PBPK, lumping model and compartment PK model with voriconazole PK case study. Methods: The number of compartments and blood flow on each tissue in the PBPK model were modified using the lumping method, considering physiological similarities. The concentration-time profiles and area under the concentration-time curve (AUC) parameters were simulated at each model, assuming taken voriconazole oral 400 mg single dose. After that, those mentioned PK parameters were compared. Results: The PK profiles and parameters of voriconazole in the three models were similar that proves their compatibility. The AUC of central compartment in the PBPK and lumping model was within a 2-fold range compared to those in the 2- compartment model. The AUC of non-eliminating tissues compartment in the PBPK model was similar to those in the lumping model. Conclusion: Regarding the compatibility of the three PK models, the utilization of the lumping method was confirmed by suggesting its reliable PK parameters with PBPK and compartment PK models. Further case studies are recommended to confirm our findings.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.4
• /
• pp.391-400
• /
• 2004

Railway curved zone have crucial effects on the speed of train. Length of transition curve is one of the important factor for alignment compatibility estimation in this sections, this value is decided by running speed and Cant. In this study, the extension method of transition curve is evaluated, based on the alignment of Jang Hang-Line, investigated field conditions of the sections in the curves exist. This research result show that changing of transition curve was proved by necessary to approximately two thirds of the curved sections, and method of fixing central point of track centerline and changing radius of curvature minimize the maximum shift in track centerline and deviation of radius, and also may be effective method for alignment suitability and speed up in case overall improvement is difficult.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1997.04a
• /
• pp.129-130
• /
• 1997

국내 및 해외에서 생산 되는 윤활유에 Cloud-point curves 및 상용성 개념을 도입하여 이러한 데이터를 측정할수 있는 장치를 기존의 Light scatering, Neutron scatering, Visible Method등이 아닌 He-Ne Laser를 이용하여 측정하는 장치이다. He-Ne Laser을 이용하여 공중합체 용액의 Cloud-point curves를 측정하였고, 측정 Cloud-point curves 데\ulcorner를 연속열역학적 상평형관계식에 적용 coex istence curves를 추산하였으며 추산치와 측정치를 비교 검토하였다. 멀지 않은 해에는 이러한 분석장치가 상용화되어 윤활유 제품의 상용성을 평가하는 장치가 될 것으로 사료된다. 따라서, 기존 윤활유 제품 및 신제품의 상용성(compatibility)을 He-Ne Laser을 이용하여 측정하고 다른 일면으로는 윤활유 제품의 고품질화 및 제품의 경쟁력을 강화하는데 커다란 영향을 미치리라 사료된다.