• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.9
• /
• pp.14-23
• /
• 1993

In this paper, we present analysis results of various intermodulation products (IMPs) evaluation methods previously proposed for nonlinear systems. The results indicate that out of these methods, Fuenzalida and Simbo's method is the best for efficient evaluation of IMPs. Also, we present a detailed mathematical analysis of IMP and show how to apply the equations related to IMP to actual program implementations with examples. In this paper, we newly introduce three methods to reduce the IMP calculation time and improve the accuracy of the outputs :1) TWTA curve fitting method by LS (Least Square), 2) IMP evaluation technique which is based on a look-up table 3) Gaussian spectral shaping for PSK signal instead of convolution. The IMP evaluation results obtained by the new approaches introduced in this paper resulted in a good match with the published outputs in the open literature and showed improved performance especially in the TWTA curve .

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.1
• /
• pp.74-80
• /
• 2010

The purpose of reverse engineering design using 3D measurement data is an accurate reconstruction of real body. In oder to accomplish this object, it is important that creating exact extracting edges should be studying out first of all. This study used edge-based method to find out edge point from the measuring point data. The characteristics are analysed using the mean curvature block method on the fitting NURBS curve and defined edges through block removal condition. The results showed that only using the NURBS curve of maximum curvature analysis to define correct edge of real geometry is limited, but this segmentation approach provides simplified necessary condition for edge classification, and an effectiveness to classify a straight line, curves and fillets etc.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1997.10a
• /
• pp.435-438
• /
• 1997

This paper presents the process generating a SAC(Sectional Area Cure) by using ASMOD(Adaptive Spline Modeling of Observation Data). That is, we define SACs of real ships as B-spline curves by a hybrid cure approximation(which is the combination method of a B-spline fitting method and a genetic algorithm) and accumulate a database of control points. Then we let ASMOD learn from the correlation principal dimensions with control points.

• Journal of information and communication convergence engineering
• /
• v.7 no.4
• /
• pp.545-550
• /
• 2009

A method fully utilizing multiscale line filter responses is presented to estimate the point spread function(PSF) of a CT scanner and diameters of small tubular structures based on the PSF. The estimation problem is formulated as a least square fitting of a sequence of multiscale responses obtained at each medical axis point to the precomputed multiscale response curve for the ideal line model. The method was validated through phantom experiments and demonstrated through phantom experiments and demonstrated to accurately measure small-diameter structures which are significantly overestimated by conventional methods based on the full width half maximum(FWHM) and zero-crossing edge detection.

• 한국전산유체공학회:학술대회논문집
• /
• 1999.05a
• /
• pp.23-28
• /
• 1999

A mutigrid convergence acceleration technique is presented for computing hypersonic inviscid and viscous flows in equilibrium state. The governing equations are solved using an explicit Runge-Kutta method. Curve fitting data in NASA Reference Publication 1181, 1260 are used to calculate equilibrium properties. In order to ensure stability, damped prolongation and modified implicit residual smoothing are proposed. Blunt body test cases are presented to demonstrate the robustness and the efficiency in performance of the proposed methods

• Proceedings of the Korean Magnestics Society Conference
• /
• 2008.12a
• /
• pp.97.1-97.1
• /
• 2008

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.1
• /
• pp.67-72
• /
• 1987

InSb TFT is fabricated by the vacuum evaporation method and I-V characteristics are measured. Employing Davidon Fletcher-Powell algorithm, the device parameters are extracted. The current-voltage relations calculated by extracdted parameters are in good agreement with experimental results. It is found that optimization technique may be more simple and accurate than curve fitting method in device parameters extration.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.10
• /
• pp.1020-1023
• /
• 2011

In this paper, we present a symbol remapping method of BRGC M-ary QAM signal by using LLR soft bit decision information which is obtained after iterative decoding process. In order to reconstruct estimated transmitted signal constellation, we have to use exponential or hyperbolic tangent(tanh) function resulting in high implementation complexity. The BRGC mapping rule enables us to use a recursive operation. In addtion, we reduce the implementing complexity by using a curve fitting algorithm.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.10
• /
• pp.95-100
• /
• 2014

To solve the problem of conventional fossil energy, utilization of renewable energy is growing rapidly. Solar energy as an energy source is infinite, and a variety of research is being conducted into its utilization. To change solar energy into electrical energy, we need to build a solar power plant. The efficiency of such a plant is strongly influenced by meteorological factors; that is, its efficiency is determined by solar radiation. However, when analyzing observed generation data, it is clear that the generated amount is changed by various factors such as weather, location and plant efficiency. In this paper, we proposed a solar power generation prediction algorithm using geographical factors such as latitude and elevation. Hence, changes in generated amount caused by the installation environment are calculated by curve fitting. Through applying the method to calculate this generation amount, the difference between real generated amount is analyzed.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.5
• /
• pp.29-35
• /
• 1995

Nonlinear distortion arising from the nonlinear movement of the loudspeaker diaphragm degradates the tone quality. The distortion is, in low frequency range, mainly caused by nonlinear characteristics of the suspension stiffness and the force factor. In this paper, the nonlinear suspension stiffness and the nonlinear force factor are modeled to the quadratic functions and a method is proposed to determine their coefficients. An additional mass to the diaphragm moved the quiescent point of the diaphragm and uncoupled the stiffness and the force factor. This made it possible to deter mine the coefficients of the nonlinear suspension stiffness by measuring the resonance frequencies at several quiescent points. The coefficients of the nonlinear force factor are then determined by fitting the curve which is calculated from the waveforms of input voltage and input current, and the displacement of the diaphragm at resonance frequency.