• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.155-160
• /
• 2008

Recently, curtainwall is built according to expand residential-commercial complex and high-raised buildings in residential buildings. It is that curtainwall has advantage to provide for the building occupants a connection between indoor spaces and the outdoors through the introduction of daylight and views into the regularly occupied areas of the building. These buildings also make a result increasing the amount used energy in domestic residence. Therefore, Aims of this study is to suggest advanced design through analysis of daylight, energy and envelope elements in GBCC and glazing simulation depended on case studies.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.1081-1086
• /
• 2006

Curtainwall systems has been applied to buildings widely for constructability. However, as cutainwall system include many building materials, they become to damaged vapor barrier and incur condensation. Natural ventilation of an air cavity in a curtainwall is expected to be an prevention of condensation in inner wall and reduce cooling energy in summer. The objective of this experimental study is to evaluating the insulation and condensation Performance of ventilated curtainwall with ventilated cavity depth and ratio of opening area.

• 국제초고층학회논문집
• /
• 제10권1호
• /
• pp.35-43
• /
• 2021

With the rapid urbanization and growing energy use intensity in the built environment, the glazed curtainwall has become ever more important in the architectural practice and environmental stewardship. Besides its energy efficiency roles, window has been an important transparent component for daylight penetration and a view-out for occupant satisfaction. In response to the climate crisis caused by the built environment, this research focuses on the study of net-zero energy retrofitting by using a new building integrated photovoltaic (BIPV) curtainwall as a sustainable alternative to conventional window systems. Design variables such as building orientations, climate zones, energy attributes of BIPV curtainwalls, and glazed area were studied, to minimize energy consumption and discomfort hours for three cities representing hot (Miami, FL), mixed (Charlotte, NC), and cold (Minneapolis, MN). Parametric analysis and Pareto solutions are presented to provide a comprehensive explanation of the correlation between design variables and performance objectives for net-zero energy retrofitting applications.

• 설비공학논문집
• /
• 제18권11호
• /
• pp.923-932
• /
• 2006

In this paper, reentering ratio and cooling capacity of individual cooling towers arrayed on a building roof were studied by a numerical method. The number of 16 cooling towers were divided into 4 banks. It was considered the summer prevailing wind characteristics as west wind and south wind of 5 m/s. It was also considered the roofwall types as the curtainwall and the louverwall that had the outdoor air intake louver in the curtainwall. In this case, the louver was suggested as the solution that could prevent reentering phenomenon due to recirculation and interference of the discharge air. In the case of the curtainwall, the averaged reentering ratio are predicted 13.3% and 24.4% for the west and south wind of 5 m/s, respectively. In the case of the louverwall, the averaged reentering ratio are predicted 2.5% and 9.7% for the west and south wind of 5 m/s, respectively. Therefore, the louverwall is a appropriate solution for reducing the reentering phenomenon.

• 한국해안해양공학회지
• /
• 제18권2호
• /
• pp.97-111
• /
• 2006

고유함수전개법을 이용하여 다열 커튼월-파일 방파제로부터의 규칙파의 반사율과 투과율을 계산할 수 있는 수학적 모형을 제안하였으며, 파일 부분의 유공율, 커튼월의 흘수 그리고 방파제 열 사이의 간격 등을 다르게 하면서 수리모형실험을 실시하였다. 상대수심이 감소하면서 반사율은 감소하고 투과율은 증가하는 경향을 보이다가, 상대수심이 아주 작아지면 반사율은 다시 증가하고 투과율은 감소하는 경향을 보였다. 다른 실험 변수들은 고정시킨 상태에서, 커튼월의 흘수만 변화시키거나 파일 부분의 유공율만 변화시키는 경우에는 반사율과 투과율의 상대적인 크기는 달라지지만 전반적인 거동은 유사했다. 입사파의 파장과 열 사이의 간격이 일치하는 경우에는 반사율과 투과율이 급격하게 변화하였다. 3열로 구성된 방파제의 경우에도 수학적 모형과 실험 결과가 대체로 잘 일치하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.78-80
• /
• 2014

Silicone structural glazing (SSG) is a method utilizing a silicone adhesive to attach glass, metal, or other panel material to the structure of a building. Windload and other impact loads on the facade are transferred from the glass or panel through the silicone structural sealant to the systems' framework. Silicone structural glazing systems are currently a very common method of glazing throughout the world. Locally, structural silicone glazing has become very common to achieve aesthetically pleasing and high utilization of small land for both residential and commercial building. Although structural silicone glazing has been utilized for approximately thirty years in Korea, the understanding of its technology was low and limited. Consequently, Korean projects experienced many quality issues during assembly and construction, even in very recently finished buildings. Adhesion loss and water infiltration occurred on more than one project, and the time and cost to repair these issues were substantial. In general, there are two kinds of structural silicones depending on fabrication methods. 1part structural silicone is for site glazing system and 2part structural silicone is for unitized factory glazing system. In this paper, 2part structural silicone which is very common for factory fabricating curtainwall systems was evaluated with regards to various mixing ratio. Since the structural performance of 2part sealant can be affected by mixing ratios, some extra ranges of recommended mixing ratio were evaluated to see any performance differences. Besides on cure profile, comparative evaluations for mechanical properties and adhesion develop on common building substrates were conducted.

• 한국해안해양공학회:학술대회논문집
• /
• 한국해안해양공학회 2008년도 발표논문집
• /
• pp.240-243
• /
• 2008

• 한국해안해양공학회:학술대회논문집
• /
• 한국해안해양공학회 2008년도 발표 논문집 제17권
• /
• pp.240-243
• /
• 2008

• 국제초고층학회논문집
• /
• 제7권1호
• /
• pp.1-16
• /
• 2018

The emergence of tall buildings in the late $19^{th}$ century was possible by using new materials and separating the role of structures and that of non-structural walls from the traditional load-bearing walls that acted as both. The role of structures is more important in tall buildings than in any other building type due to the "premium for height". Among the walls freed from their structural roles, façades are of conspicuous importance as building identifiers, significant definers of building aesthetics, and environmental mediators. This paper studies dynamic interrelationship between the evolution of tall building structural systems and façade design, beginning from the early tall buildings of skeletal structures with primitive curtainwalls to the recent supertall buildings of various tubular and outrigger structures with more advanced contemporary curtainwalls.

• 대한건축학회논문집:계획계
• /
• 제34권2호
• /
• pp.95-106
• /
• 2018

This study aimed at revaluating Frank Gehry's freeform constructions. To this end, the study analyzed the way the space composition and circulation system of general constructions are connected with newly extended parts in the Art Gallery of Ontario and, based on this, comparatively analyzed freeform constructions before and after the art gallery, finding out what changes were made in the exterior and interior spaces of freeform constructions built after the art gallery. The results of the study are as follows. First, starting from extending the Art Gallery of Ontario, Gehry came to use glass instead of metal as main material of freeform constructions. In order to create the circulation connecting the existing building and the extended mass, Gehry applied continuing circulation for the first time to the gallery. Third, in addition to design motives, such as the woodblock print depicting a carp by Hiroshige, still life depicting a glass bottle by Morandi and the crease of the shawl in Vermeer's paintings, which Gehry applied to freeform constructions, the design motif which was recently acquired from Pyrenees rock was added. Fourth, the trend of mall construction appeared before and after the Art Gallery of Ontario. Finally, Gary used the shape of fish as a design motif for his work at an important turning point in his Freeform Architecture.