• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.191-192
• /
• 2014

Multiple output converters (MOCs) are widely used for applications which require various levels of the output voltages due to their benefits in cost, volume, and efficiency. However, most of the MOCs developed so far can regulate only one output tightly and require as many secondary windings in the transformer as the number of the outputs. In this paper, a novel Time Division Multiple Control (TDMC) method to regulate all the outputs in high precision is proposed and applied for the multiple output battery charger based on the phase shift full bridge topology to charge a multiple number of batteries at one time. The proposed converter can charge three different kinds of batteries or same kind of batteries in different state of charges (SOCs) by using constant current/constant voltage (CC/CV) charge mode independently. At the same time it can provide an even degree of tight regulation for each output to satisfy the strict ripple requirement of the battery. The validity and feasibility of the proposed method are verified through the experiments.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.377-378
• /
• 2012

DC-DC 컨버터를 인터리브 방식으로 제어하면 출력 전류 리플이 저감되고, 출력 필터 커패시터의 용량을 줄일 수 있다. 하지만 공진(Resonance)을 통해 전력을 전달하는 LLC 공진형 컨버터의 경우 회로를 구성하는 공진 인덕터 및 공진 커패시터의 오차(Tolerance)로 인해 출력 전류 리플의 언밸런스가 심화될 수 있다. 따라서 이를 개선할 수 있는 방법에 대한 연구가 필요하다. 본 논문에서는 Y결선 정류기를 이용한 3상 인터리브드 LLC 공진형 컨버터의 출력 전류 리플 밸런싱 방법을 제안한다. 제안된 방법은 3상 인터리브드 LLC 공진형 컨버터와 각 LLC 공진형 컨버터 앞단의 Bridgeless PFC가 독립적으로 추가되어 회로가 구성된다. 3상 인터리브드 LLC 공진형 컨버터는 분할된 위상으로 비독립적으로 제어하며 출력 전류 리플의 언밸런스를 Bridgeless PFC의 출력 전압을 가변함으로써 개선할 수 있는 방법을 제안하고 이를 시뮬레이션(PSIM)을 통해 제안된 밸런싱 방법을 검증하였다.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.2
• /
• pp.97-104
• /
• 2017

In the present industrial field, the demand for the development of the solar power source device and the charging device for the solar cell is gradually increasing. The solar charger is largely divided into a DC-DC converter that converts the voltage generated from the sunlight to a charging voltage, and a battery and a charger that are charged with an actual battery. The conventional charger topology is used either as a Buck converter or a Boost converter alone, which has the disadvantage that the battery can not always be charged to the desired maximum power as input and output conditions change. Although studies using a topology capable of boosting and stepping have been carried out, Buck-Boost converters or Sepic converters with relatively low efficiency have been used. In this paper, we propose a new Buck Boost combination power converter topology structure that can use Buck converter and Boost converter at the same time to improve inductor current ripple and power converter efficiency caused by wide voltage control range like solar charger.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.2_1
• /
• pp.139-147
• /
• 2020

In order to satisfy the voltage levels of the low voltage battery side and high voltage DC bus, a high voltage gain with bidirectional operation is required. In this system, the cost effectiveness of the design is a critical factor; therefore, the system should be designed using a small number of components. This paper propose a novel bidirectional converter composed with a quasi-sepic and switched-indictor network. The proposed converter consists a small number of components with a high voltage gain ratio. Detailed analysis are made with respect to the operating mode, number of components, voltage and current ripple and efficiency. To verify performance of the proposed converter, simulation was performed is this paper. The simulation results are shown to verify the feasibility and performance of the proposed bidirectional converter.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.301-302
• /
• 2012

본 연구에서는 ripple 형태의 ZnO 박막을 역구조 태양전지의 전자 수집층으로 사용하였으며, 원자층 증착법 (Atomic Layer Deposition, ALD)을 이용하여 $TiO_2$ 박막을 ZnO 표면에 증착하였다. $TiO_2$가 ZnO 표면 위에 약 <3nm 정도 두께의 초미세 박막으로 형성되었을 경우 태양전지의 성능이 향상되었다. 특히 Jsc (short-circuit current)와 전환효율 값의 향상을 보였다. 반면 $TiO_2$를 더 두껍게 증착되었을 경우 오히려 태양전지 성능이 떨어지는 결과를 얻었다. 이와 같은 결과 전자를 수집하는 ZnO 위에서 $TiO_2$가 장벽으로 작용함으로써 전자의 이동을 억제하기 때문으로 풀이된다. 반면 $TiO_2$가 초미세 박막으로 형성되었을 때 ZnO 표면에 존재하는 결함자리, 즉 전자와 정공이 재결합하는 자리를 덮어줌으로써 오히려 태양전지의 성능을 향상시키게 된다. 본 연구에서는 ALD 방법을 이용하여 $TiO_2$의 미세한 두께조절을 통해 태양전지 성능향상이 가능함을 확인하였다.

• Journal of Fashion Business
• /
• v.23 no.2
• /
• pp.34-47
• /
• 2019

Fashion can be regarded as an effective marketing tool for the promotion of urban tourism. Since fashion is attractive in itself, it can work as a resource which fascinates people and attracts many tourists to the city. This study examines fashion tourism based on the close relationship between fashion and tourism. This study focuses on analyzing the positive effect of the existence of a fashion museum on the advent of fashion tourism, in particular. A fashion museum can be classified in the same category as an art museum, whereby the museum exists as specializing in fashion and is considered a fashion brand museum. Thus, this study examines the current trends and characteristics of fashion museums and analyzes roles of fashion museums in fashion tourism by types, which are based on advanced researches of general tourism including trends in the fashion tourism industry. The results of this study are as follows: First, a fashion museum can help spread the word and educate tourists about fashion culture. Second, a fashion museum can increase the value of its brand by strengthening the city's identity. Lastly, the presence of a fashion museum would encourage tourists to spend more money in the city, which causes a ripple effect on the city's economy such as creating more jobs within the fashion.

• The Journal of Industrial Distribution & Business
• /
• v.14 no.6
• /
• pp.27-35
• /
• 2023

Purpose: Convergence and social ripple effects caused by the Fourth Industrial Revolution, which encompasses new technologies in various fields, will have a great impact on the beauty industry structure and market economy. This review reviewed the literature on the changes in the employment environment of the Korean beauty industry due to the 4th industrial revolution and the countermeasures of the beauty industry accordingly. Research design, data and methodology: Using the October 2022 PRISMA flowchart, it is a review of changes in the employment environment of the beauty industry, the need for human resource management of beauty workers, and the employment environment to be applied to the beauty industry in the future. Results: Changes in the employment environment in the era of the 4th Industrial Revolution, the current state of the beauty industry, and reviews on beauty industry workers were collected, and a direction for training beauty industry workers was presented. Conclusions: This study presented the direction of the beauty industry in preparation for changes in the employment environment of the 4th industrial revolution and suggested that research is needed to actively establish human resource management (HRM) to overcome the problem of fostering talent in the beauty industry.

• Fire Science and Engineering
• /
• v.29 no.5
• /
• pp.73-78
• /
• 2015

Since the hydrofluoric acid spill accident in Gumi in 2012, the current situation has continued to suffer from makeshift responses or feeble national system maintenance in preparing real countermeasures against chemical accidents, regardless of their repeated occurrence and seriousness. Industrial chemical accidents have an enormous ripple effect on the whole country and society. The purpose of this study is to propose ways of establishing directions for the national disaster management system against repeated occurrence of chemical accidents. To achieve this goal, the present study proposed improvement measures of response system for industrial chemical accident through the analysis of the current response system and structural causes of disaster control failure for chemical accidents.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.6
• /
• pp.498-505
• /
• 2001

This paper shows how to design a global control of water pumping system using PV array, and tracked maximum power point of PV array only the inverter using the vector control of BLDC motor, and finding the relationships among the DC magnitudes and AC ones in order to omit the DC/DC converter. Conventional MPPT controller was unstable of reason of the ripple-current of DC link in three-phase invertor. Thus, in this paper the control algorithm of BLDC motor using $i_qs$ current is composed to improve the insecurity of conventional MPPT controller To prove the excellence of the proposed method, the contents of this paper is analyzed by means of simulation and testing for the results applying the method that J. A Domfnguez had applied to asynchronous motor to BLDC motor and that of the proposed method in this paper.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.3
• /
• pp.29-37
• /
• 2000

In this paper, the thrust control of PWM Inverter-fed SLIM(Single-sided Linear Induction Motor) is achieved by vector control and PID control with DSP(TMS320C32). SLIM which used as a conveyor has required the quick response and the constant operating without air gap trembling while it conveys load.Thus, SLIM should have the smallest trembling of air gap length. First, voltage equations for SLIM are calculated from the proposed equivalent circuit in this peper, and not only the exciting current but also the thrust component are obtained from them. The thrust current ripple can be reduced by the vector controller using a slip angle frequency, and the PID controller is also use for the position control.