• Journal of the Korean Solar Energy Society
• /
• v.32 no.spc3
• /
• pp.245-254
• /
• 2012

In photovoltaic system, the characteristics of photovoltaic module such as open circuit voltage and short circuit current will be changed because of cell temperature and solar radiation. Therefore, the boost converter of a PV system connects between the output of photovoltaic system and DC link capacitor of grid connected inverter as controlling duty ratio for maximum power point tracking(MPPT). This paper shows the dynamic characteristics of the boost converter by comparing single-loop and two-loop control algorithm using both analog and digital control. Both proposed compensation methods have been verified with computer simulation to demonstrate the validity of the proposed control schemes.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.1
• /
• pp.1-9
• /
• 2008

Recently, various researches have been studied on the predict method of land change according to its development. The Cellular Automata(CA) is one of the most popular methods in the urban growth modeling. The basis principle of CA is to repeat operations, which convert the current cell into new cell state by the transaction rule. It will minimize the loss of data by using Fuzzy-AHP and it can lead the flexible urban growth modeling. However, AHP would have a disadvantage to repeat the procedure of the collecting intentions until it derives the weight. Also, it is necessary for the simulation of CA to repeat the operations and the test of data accuracy should be accompanied. The purpose of this study is to predict the Busan city growth model and analyze it according to the automated test method by applying CA as well as Fuzzy-AHP. This study shall improve the difficulties caused by complexity and repetitiveness in the urban grow modeling. The practical modeling could be derived from the verification, and the derived modules could be applied to the similar case studies.

• Journal of Korea Multimedia Society
• /
• v.19 no.2
• /
• pp.375-385
• /
• 2016

Recently, several implantable hearing aids such as cochlear implant, middle ear implant, etc., which have a module receiving power and signal from outside the body, are frequently used to treat the hearing impaired patients. Most of implantable hearing aids are adopted permanent magnet pairs to couple between internal and external devices for the enhancement of power transmission. Generally, the internal device which containing the magnet in the center of receiving coil is implanted under the skin of human temporal bone. In case of MRI scanning of a patient with the implantable hearing aid, however, homogeneous magnetic fields of the MRI might be interfered by the implanted magnet. For the above reasons, the MR image is degraded by large area of artifact, so that diagnostics are almost impossible in deteriorated region. In this paper, we proposed an external coil system that can reduce the artifact of MR image due to the internal coupling magnet. By finite element analysis estimating area of MR artifact according to varying current and shape of the external coil, optimal coil parameters were extracted. Finally, the effectiveness of the proposed external coil system was verified by confirming the artifact at real MRI scan.

• Korean Journal of Clinical Laboratory Science
• /
• v.41 no.1
• /
• pp.42-46
• /
• 2009

Unlike most bacteria, Treponema pallidum subspecies cannot be readily isolated or sustained in cell culture for numerous generations. In korea, two non treponemal tests are currently considered as standard; the VDRL slide test and RPR card test. These tests are based on an antigen composed of an alcoholic solution containing measured amount of cardiolipin, cholesterol, and sufficient purified lecithin to produce reactivity. The nontreponemal reagin tests measure immunoglobulin M (IgM) and IgG to lipoidal material released from damaged host cells as well as to lipoprotein-like material and possibly by cardiolipin released from the treponemes. The object of the evaluation was to evaluate the performance of the Mediace RPR kit on the automated biochemistry analyzer system as a method for screen method of syphilis as well as to identify BFP possibility. For evaluation of routine screening test, a total 2,380 specimens tested by Mediace RPR from 28th Oct, 2007 to 22th Feb, 2008. For evaluation of BFP possiblility, we measured samples which have potential BFP reaction in Syphilis test such as ANA (anti-nuclear antibody) positive (135 samples), CRP (C-reactive protein) positive (100 samples), RF (Rheumatoid factor) positive (26 samples), and other potential BFP cases (17 samples) including total 278 samples. These samples were tested quantitative test Mediace RPR with Hitachi 7600 P module. For comparison with current manual test, VDRL slide test were performed. Of these 2380 specimens, 2350 were negative, 30 were positive, and one were positive with TPHA. Both methods agreed for 2356 (98.9%) samples. Of the 30 samples showed positive results over 1.0 R.U, 6 samples showed positive results with VDRL test. Of these 6 samples, 1 samples showed positive with TPHA test. The combination of the Automated Biochemistry analyzer and VDRL test for retest can be increase efficiency of syphilis screening test.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.743-744
• /
• 2012

LED digital control convergence technology is receiving attention. It enables to analyze lighting and living environments by recognizing user information and situations through a signal process system composed of a multi-functional composite sensor's module. LED lighting is higly efficient, long-lived, environmentally, and is possible to converge with communication, and receiving as a next-generation general lighting that will replace a florescent light including the light bulb. The proposed system is an intelligent LED control system that uses solar light. This study is about a lighting control technology associated with user-estimated information/situation and related low-cost technology. Also, this study aims to embody emotional lighting by appropriately lighting 10% of the discharge current with supplementary colored LED according to the surrounding environment.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.5
• /
• pp.71-78
• /
• 2004

An infrared remote control-type transcutaneous control device using a $\mu$-processor is design for the totally implantable middle ear system. An infrared light transmission model for the tissue of skin was introduced and then a radiant intensity and the required current of the infrared light emitting diode(IR LED) driving circuit at transmission part were calculated for the external control device. And the transmission part generates IR signal by the system's own data protocol which prevents interferences from other infrared remote controls of the household appliances. The control part of the implanted device was designed to analyze functions of the received infrared(IR) signal that indicate the power ON/OFF and volume UP/DOWN. After the system is implemented, a data transmission experiments using 4 mm thickness of porcine skin were carried out. From the experiment, it was verified that the infrared control signal was transmitted to receiving module of the implemented system without any error.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.11
• /
• pp.5741-5746
• /
• 2012

Aim: Although preoperative chemoradiatherapy (CRT) has proven its benefits in terms of decreased toxicity, there is still a considerable amount of cases that do not receive postoperative CRT. Oncologists at different geographic locations still need to know the long-term effects of this treatment in order to manage patients successfully. The current paper reports on long-term quality of life (QOL) and late side effects after adjuvant CRT in rectal cancer patients from 5 centers in Anatolia. Methods: Rectal cancer patients treated with postoperative CRT with minimum 1-year follow-up and were in complete remission, were evaluated according to RTOG and LENT-SOMA scales. They were also asked to complete Turkish version of EORTC QLQ-C30 questionnaire and the CR-38 module. Each center participated with the required clinical data. Results: Two hundred and thirty patients with median age of 55 years participated and completed the study. Median follow-up time was 5 years. All patients received RT concomitant with chemotherapy. Common parameters that both increased functional health scales and yielded better symptom scores were long term interval after treatment and sphincter-saving surgery. In addition, surgery type and follow-up time were determined to be predictors of QOL scores and late toxicity grade. Conclusion: Postoperative CRT was found to have a great impact on the long term QOL and side effects in rectal cancer survivors. The factors that adversely affect these are abdominoperineal resection and shorter interval. The findings may encourage life-long follow-up and cooperation with patients, which should be mentioned during the initial counseling.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.6
• /
• pp.1225-1230
• /
• 2017

3D printers have been growing mainly in industrial use, but the recent growth of the personal 3D printer market advanced through economic effects and cost reduction due to technological development. However, current 3D personal printers are very low in customer satisfaction on the limitations of molding speed, size, and precision. In this paper, we propose SLA 3D printer using LSU to overcome the technical limitation of personal 3D printer. In order to verify the operation of the scanning mechanism which is responsible for core functions, the movement of molding board using stepping motor and laser output test was conducted. These tests ensure that the laser was operating and control well was confirmed that a certain point is output to the X-axis by means of a laser module and a polygon mirror. 3D printers which are proposed to improve the accuracy and manufacturing speed is expected to replace the traditional low-budget 3D printer.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.9-14
• /
• 2016

The Korea Communication Commission(KCC) measures communication qualities of mobile phones' voice calls, mobile internet, and broadband internet to provide quality communication services. It particularly focuses on measuring qualities of mobile internet data that is on the rise in terms of usage. However, existing quality measurement simply measures the speed of mobile communication through data without providing much information to users and does not disclose measured data, making it hard for individuals to objectively determine their communication quality. Thus, to improve such problems, the author suggests a system that measures qualities of mobile communication through Android. The method guarantees user convenience and reliability and improved mobile communication by making it easy for users to select the quantity of data to be used. It also saves the current GPS obtained through GPS module or mobile communication network and transfers measured data to servers so that the data can be processed into new information and be reinterpreted.

• Applied Chemistry for Engineering
• /
• v.27 no.4
• /
• pp.353-357
• /
• 2016

Following the population growth and civilization, resulted in energy-mass consumption society, research efforts on enhancing efficiency of traditional energy sources has been investigated. Among many alternatives, thermoelectric power generation technologies are highlighted as one of solutions for high heat energy efficiencies. Currently, the research area of thermoelectric power generation has been achieved over two of ZT value, which seems to have enough competitiveness as following the development of nano-technologies, in particular, for waste heat recovery, and the development of thermoelectric materials is still ongoing to obtain higher energy efficiencies. In this review, the recent development of thermoelectric materials and module technologies categorized by different temperature regions was briefly introduced.