• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.250-253
• /
• 2003

In general, AC transport current loss of vertically stacked HTS tapes is larger than simple multiplication of single tape by stacked number. In this study we investigated the transport current and current distribution in face-to-face stacked conductor Numerical method has been developed for loss estimation and compared to the experimental works. Two results showed goof agreement each other The stacked conductor behaved like a single watching current distribution, From this point of view it is possible to suggest the other analogy to predict the transport current loss. All results were presented and checked the validities of the loss estimation.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.14-17
• /
• 2003

In general, AC transport current loss of vertically stacked HTS tapes is larger than simple multiplication of single tape by stacked number. In this study we investigated the transport current and current distribution in face-to-face stacked conductor Numerical method has been developed for loss estimation and compared to the experimental works. Two results showed goof agreement each other. The stacked conductor behaved like a single watching current distribution, From this point of view, it is possible to suggest the other analogy to predict the transport current loss. All results were presented and checked the validities of the loss estimation.

• Journal of Magnetics
• /
• 제19권1호
• /
• pp.90-100
• /
• 2014

Position estimation that uses only active phase voltage and current is presented, to perform high accuracy position sensorless control of a SRM drive. By extracting the amplitude of the first switching harmonic terms of phase voltage and current for a PWM period through Fast Fourier Transform (FFT), the flux-linkage and position are estimated without external hardware circuitry, such as a modulator and demodulator, which result in increased cost, as well as large position estimation error, produced when the motional back EMF is ignored near zero speed. A two-phase SRM drive system, consisting of an asymmetrical converter and a conventional closed-loop PI current controller, is utilized to validate the performance of the proposed position estimation scheme in comprehensive operating conditions. It is shown that the estimated values very closely track the actual values, in dynamic simulations and experiments.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제3B권1호
• /
• pp.59-64
• /
• 2003

This paper presents a new rotor position estimation method for brushless DC motors. The estimation error of the rotor position clearly provokes the phase shift angle misaligned between the phase current and the back-EMF waveforms, which causes torque ripple in brushless DC motor drives. Such an estimation error can be reduced with the help of the proposed neutral-voltage-based estimation method, which is structured as a closed loop observer. A neutral voltage appearing during the normal mode of the inverter operation is found to be an observable and control table measure, which can be used for estimating an exact rotor position. This neutral voltage is obtained from the DC-link current, the switching logic, and the motor speed values. The proposed algorithm, which can be easily implemented by using a single DC-link current and the motor terminal voltage sensors, is verified by simulation and experiment results.

• 전기학회논문지
• /
• 제58권10호
• /
• pp.2038-2040
• /
• 2009

This paper studies the state estimation problem for the current of DC/DC boost converters with parasitic inductor resistance. The parasitic resistance increases the system uncertainty when the output load variation occurs. In order to enhance the observation performance of the Luenberger observer this paper includes the integral of the estimation error signal to the estimation algorithm. By using the proposed PI observer the converter current signal is successfully reconstructed with the voltage measurement regardless of the load uncertainty. Computer simulation has been carried out by using Simulink/Sim Power System. Simulation results show the proposed method maintains robust estimation performance against the model uncertainty.

• 한국정보통신학회논문지
• /
• 제21권9호
• /
• pp.1818-1825
• /
• 2017

ADCP(Acoustic Doppler Current Profiler) 는 초음파의 도플러 효과를 이용하여 수중에서 유속의 측정 및 교란 정도를 분석한다. 따라서 수신되는 각 공간 영역에 대한 속도 정보를 추출하기 위하여 수신 펄스 신호에 대한 자기 상관 함수나 FFT(Fast Fourier Transform) 스펙트럼을 추정한다. 그러나 자기 상관 함수 추정은 수신되는 반사 신호가 가우시안 형태의 대칭적인 도플러 스펙트럼을 가진다는 가정이 필요하며 이러한 조건이 만족 되지 않는 경우 추정치에서의 큰 편향오차가 발생할 수 있다. 또한 유속의 변화가 빠르게 나타나는 경우 신호 획득시간이 짧아 유속을 측정하기 위한 자기 상관 함수 나 FFT 스펙트럼의 정확한 추정이 어렵다. 따라서 본 논문에서는 반사 신호가 대칭형 또는 비대칭형 가우시안 형태의 스펙트럼을 보이면서 상대적으로 짧은 반사 획득 신호인 경우에도 정확한 유속 추정이 가능한 AR(Autoregressive) 스펙트럼 첨두치 추정 방법을 제안하였다. 이러한 방법을 이용하면 기존 방법에 비하여 그 정확도를 개선할 수 있음을 보였다. 제안된 방법의 평가를 위하여 다양한 환경에서의 모의 신호들을 구현하였으며 그 결과들을 비교하고 분석하였다.

• 조명전기설비학회논문지
• /
• 제14권4호
• /
• pp.39-47
• /
• 2000

본 논문에서는 입력전류 추정에 의한 전밥형 PWM 컨버터의 정상상태 및 과도상태 특성을 개선하기 위하여 정현추종제어기를 제안한다. 그리고, 입력전류의 추정방법과 제어기의 구성에 대해서 논의된다. DC 출력전압은 PI제어기로 제어되며, AC 입력전류를 직접추총 제어하는 정현추종 전류제어기가 입력전류 제어기로 사용된다. 정현추종 전류제아기는 좌표변환 알고리즘 없이 사용가능 하므로 제어계를 간소화 할 수 있다. 입력전류 제어계의 전달함수로부터 입력전류의 정상상태오차가 0이 되고, 입력전압의 동에 대해서도 제안한 제어계는 영향을 받지 않는다는 것을 알 수 있다. 아울러 제안한 방법에 대한 타당성이 시뮬레이션 및 부하, 입력 전압 변동에 대한 실험결과로부터 확인할 수 있다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권3호
• /
• pp.1441-1461
• /
• 2017

Nowadays, Dynamic Adaptive Streaming over HTTP (DASH) has become very popular in streaming multimedia contents. In DASH, a client estimates current network bandwidth and then determines an appropriate video quality with bitrate matching the estimated bandwidth. Thus, estimating accurately the available bandwidth is a significant premise in the quality of video streaming, especially when network traffic fluctuates substantially. To cope with this challenge, researchers have presented various filters to estimate network bandwidth adaptively. However, experiment results show that current schemes either adapt slowly to network changes or adapt fast but are very sensitive to delay jitter and produce sharply changed estimation. This paper presents a novel bandwidth estimation scheme based on Moving Average Convergence Divergence (MACD). We applied an MACD indicator and its two thresholds to classifying network states into stable state and agile state, based on the network state different filters are applied to estimate network bandwidth. In the paper, we studied the performance of various MACD indicators and the threshold values on bandwidth estimation. Then we used a DASH proxy-based environment to compare the performance of the presented scheme with current well-known schemes. The simulation results illustrate that the MACD-based bandwidth estimation scheme performs superior to existing schemes both in the speed of adaptively to network changes and in stability in bandwidth estimation.

• 한국전자파학회논문지
• /
• 제11권2호
• /
• pp.259-267
• /
• 2000

본 논문에서는 미소 간극에서 방전이 일어날 때 발생하는 방사 전자파를 측정하여 이로부터 방전전류의 파형 을 추정하는 방법에 관하여 검토하고 있다. 시간영역 전자계 측정용 안테나를 사용하여 적절한 위치에서 관측한 측정 전계 또는 측정 자계로부터 방전전류를 추정하는 1 안테나 법(단일 전자계 법)과 2 안테나 법(복수 전자계 법)을 제시하고, 측정된 전계를 이용하여 1 안테나 법 및 2 안테나 법에 의한 방전전류의 파형을 추정(복원)하 고 였다. 추정된 방전 전류파형은 Wilson & Ma의 방전 전류 측정 결과와도 비교하여 본 논문에서 제시한 2가지 추정볍 이론의 타당성을 확인하고 있다.

• Journal of Power Electronics
• /
• 제15권2호
• /
• pp.411-418
• /
• 2015

In this paper, a new method for the online estimation of equivalent series resistances (ESR) of the DC-link capacitors in induction machine (IM) drive systems with a front-end diode rectifier is proposed, where the ESR estimation is conducted during the regenerative operating mode of the induction machine. In the first place, a regulated AC current component is injected into the q-axis current component of the induction machine, which induces the current and voltage ripple components in the DC-link. By processing these AC signals through digital filters, the ESR can be estimated by a recursive least squares (RLS) algorithm. To acquire the AC voltage across the ESR, the DC-link voltage needs to be measured at a double sampling frequency. In addition, the ESR current is simply reconstructed from the stator currents and switching states of the inverter. Experimental results have shown that the estimation error of the ESR is about 1.2%, which is quite acceptable for condition monitoring of the capacitor.