• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.288-290
• /
• 2003

The transformer is expected to be an essential component of resistive type superconducting fault current limiter (SFCL) for both the increase of voltage ratings in SFCL and the simultaneous quench due to different critical current between HTSC elements. However, for the design to prevent the saturation of iron core and the effective fault current limitation, the analysis for operation of SFCL with consideration for the magnetization characteristics are required. In this paper, the fault current limiting characteristics related with the magnetization ones were investigated through the variation of the ratio of the number of turns in the 1st and the 2nd windings. The proper design condition with variation of the number of turns to make the effective fault current limiting operation could be determined.

• 대한전기학회논문지
• /
• 제45권1호
• /
• pp.74-80
• /
• 1996

This paper describes current controlled PWM technique of PM synchronous motors for a wide variety of speed control applications. They are however limited in their ability to operate in the power limited regime where the available torque is reduced as the speed is increased above its base value. This paper reviews the operation of the PMSM drives when they are constrained to be within the permissible envelope of maximum inverter voltage and current to produce the rated power and to provide this with the highest attainable rotor speed. The optimal field-weakening control algorithm is the use of phase current and d-axis current feedback to reduce of error between the d-axis current command and real current and to improve the torque characteristics. The improved torque characteristics of speed control strategy with optimal field weakening control algorithm is analyzed and the performance is investigated by the computer simulation and experimental results. (author). refs., figs.

• 한국환경보건학회지
• /
• 제49권2호
• /
• pp.118-128
• /
• 2023

Background: The use of heated tobacco products (HTP) causes many adverse health effects. Although the use of HTP by adolescents is prevalent worldwide, research related to it is very limited. There is a considerable lack of research related to the current HTP use rather than ever-HTP use. In particular, research related to predictive factors for current HTP use in adolescents is scarce. Objectives: The purpose of this study was to analyze related characteristics according to the current use of HTP among South Korean adolescents. Methods: This was a cross-sectional study that used data from the Seventeenth Korean Youth Risk Behavior Web-based Survey (KYRBWS). A total of 54,848 students in 2021 were included in this study. Chi-square-test, multiple logistic regression analysis, and chi-square test for trend were used for analyzing related characteristics according to use of HTP. Results: Overall, 715 (1.3%) students responded as having used HTP during the last 30 days among the 54,848 students. It was found that residence type, subjective body type recognition, subjective health recognition, alcohol use, habitual drug experience, close friend current smoking, and conventional cigarette smoking were significantly associated characteristics with the current use of heated tobacco products. Comparing 'very thin recognition' with 'very fat recognition', the adjusted odds ratio (OR) was 1.93 (95% confidence interval [CI]: 1.29~2.87) for current use of HTP. Additionally, comparing 'very unhealthy recognition' with 'very healthy recognition', the aOR was 3.82 (95% CI: 2.40~6.07) for current use of HTP. Conclusions: Based on these results, residence type, subjective body type recognition, subjective health recognition, alcohol use, habitual drug experience, close friend current smoking, and conventional cigarette smoking were associated with significantly increased odds of current HTP use. Therefore, the results of this study can provide useful evidence about adolescent behaviors in predicting current HTP use.

• 한국초전도ㆍ저온공학회논문지
• /
• 제10권1호
• /
• pp.10-14
• /
• 2008

Differently from BSCCO tapes which are fabricated by powder-in-tube method, the coated conductors are made by the evaporation of YBCO on metal substrate. Due to this structural merit, although the coated conductors are generally used for large current transportation, they are expected to be favorable to the purpose of the fault current limitation as well. In this study, using YBCO coated conductor having copper stabilizer formed by plating technique(produced by Superpower Co.), we investigated the over-current characteristics of the coated conductor. The coated conductors had 85 A $I_c$ and 90 K $T_c$. The resistance of the conductor was 0.93 $m{\Omega}/cm$ at 300 K and 0.17 $m{\Omega}/cm$ at the temperature right above $T_c$. To the coated conductors, we applied the voltages of the range from 150 $V_{rms}$ to 230 $V_{rms}$ and measured the V-I curves using four probe method. From the results, we could analyze the electric behavior of the coated conductor in flux flow state. As the current exceed $I_c$, the currents were distributed into the superconductor and metal stabilizer. The amounts of the currents shared through both current paths were calculated under the assumption that the ,Joule heating was perfectly eliminated by $LN_2$ surrounding the conductor. Finally, the condition for the stable current flowing state which does not affect the conductor was established from the analysis on the over-current characteristics.

• Architectural research
• /
• 제2권1호
• /
• pp.17-25
• /
• 2000

The purpose of this study was; 1) to describe consumer preferences for wood~framed housing; 2) to determine factors which affect the preferences for housing environments in wood-framed housing by demographic, current housing, and wood-framed housing-related characteristics; and 3) to identify differences in preferred wood-framed housing related characteristics by demographic and current housing characteristics. From the visitors to a model wood-framed house in Seoul, Korea, 296 persons willing to live in a wood-framed house were selected as the sample for the study. Data were collected using a self-administered survey and analyzed by frequency distribution, factor analysis, chi-square test, t-test, and one-way analysis of variance procedures. The results of the study Indicated that among seven factors based on 32 housing characteristics, Factor 2 - "floor plan and Interior environment" was the major variable which showed significant difference by selected demographic characteristics. Regarding the differences in wood-framed housing related characteristics by demographic characteristics, age, gender, education, and family life cycle showed group differences. Also, housing type was the major current housing characteristic to provide significant group difference in preferred wood-framed housing characteristics.

• 한국전기전자재료학회논문지
• /
• 제18권1호
• /
• pp.17-23
• /
• 2005

The switching characteristics of MOS-Controlled Thyristor(MCT) is studied with variation of the channel length and impurity concentration in ON and OFF FET channel. The proposed MCT power device has the lateral structure and P-epitaxial layer in substrate. Two dimensional MEDICI simulator and PSPICE simulator are used to study the latch-up current and forward voltage-drop from the characteristics of I-V and the switching characteristics with variation of channel length and impurity concentration in P and N channel. The channel length and N impurity concentration of the proposed MCT power device show the strong affect on the transient characteristics of current and power. The N channel length affects only on the OFF characteristics of power and anode current, while the N doping concentration in P channel affects on the ON and OFF characteristics.

• 전기전자학회논문지
• /
• 제28권2호
• /
• pp.204-208
• /
• 2024

본 논문에서는 ESD 보호회로의 전류구동 특성을 향상시키기 위해 일반적인 저전압용 ESD 보호회로인 LVTSCR의 구조적 변경을 적용한 ESD 보호회로를 제안한다. LVTSCR 구조에서의 electric field와 ESD 전류 경로가 형성 되는 영역을 분리하여 전력 소모를 최소화 하였으며 이에 대한 전기적 특성을 분석하고 전류 구동 특성을 개선하였다. 시뮬레이션을 통한 System-level 특성 저하에 기인하는 구조적인 문제를 분석하였으며 이를 반영하여 특성을 검증하였다. 제안된 ESD 보호회로의 전기적 특성은 TCAD 시뮬레이션을 통해 검증하였으며 HBM 모델링 및 System-level 모델링을 통해 분석하였다. 또한, DB-Hitek사의 0.18um BCD 공정을 통해 silicon 제작 및 HBM 10kV 특성 검증하였다.

• 전기학회논문지
• /
• 제62권7호
• /
• pp.925-930
• /
• 2013

The fault current of the power transmission system is greater than that of the power distribution system. Therefore, the introduction of superconducting fault current limiter (SFCL) is more needed to reduce the increased fault current. The trigger-type SFCL consists of the high-temperature superconducting element (HTSC), the current limiting reactor (CLR) and the circuit breaker (CB). The trigger-type SFCL can be used to supplement the disadvantages of the resistive-type SFCL. The operation characteristics of the current ratio differential relay which is usually applied to the protection device of the power transmission system are expected to be affected under fault conditions and the applicability of the trigger-type SFCL. In this paper, we analyzed the operating characteristics, by the fault conditions, between the current ratio differential relay for line protection and the trigger-type SFCL in the power transmission system through the PSCAD/EMTDC simulation.

• Transactions on Electrical and Electronic Materials
• /
• 제18권1호
• /
• pp.42-45
• /
• 2017

In this paper, a transformer type SFCL (superconducting fault current limiter) using an additional magnetically coupled circuit was suggested. Its transient fault current limiting characteristics, due to the winding direction of additional coupled circuit, were analyzed through fault current limiting tests. The suggested transformer type SFCL was composed of the primary winding, and one secondary winding wound on the same iron core together with an additional magnetically coupled circuit. That circuit consists of the other secondary winding together with the other SC (superconducting) element connected in parallel with its other secondary winding. As one of the effective design parameters to affect the transient fault current of the SFCL, the fault current limiting tests of the suggested SFCL were carried out considering the winding direction of its additional coupled circuit. It was confirmed that, through the analysis on the fault current tests of the SFCL, the quench sequence of two SC elements comprising the suggested SFCL could be adjusted by the winding direction of the additional coupled circuit.

• 전기학회논문지P
• /
• 제59권4호
• /
• pp.477-480
• /
• 2010

Fault current in power system is expected to increase by demand of power capacity. Therefore, when the fault occurred, fault current was increased in the power system. Many studies have been progressed to limit the fault current. Superconducting fault current limiter (SFCL) is one of them which has been studied in worldwide. In this paper, we will analyze characteristics of a transformer-type SFCL by reclosing operation when the voltage increases. Twice opening times in the reclosing of circuit breaker were set as the 0.5 and 15 seconds, respectively. Turn's number of primary and secondary coils set 4:2 and we increased voltages from 120V to 280V for each experiment. By the current waveform, maximum fault current in second and third cycles was lowered when the voltage was increased. In the recovery waveform, recovery time was increased as the voltage was increased. The reason was that power burden of the SFCL increased when consumption power was increased, so the time to get back to SFCL took longer. We compared the characteristics of a resistive-type and transformer-type SFCL. As a result, we found that the fault current of a transformer-type was lower than resistive-type and recovery time of the SFCL was shorter. Consequently, transformer-type SFCL was more profitable for limitation of fault current and recovery time under the same condition for reclosing operation.