• 대한전기학회논문지:전력기술부문A
• /
• 제51권5호
• /
• pp.225-231
• /
• 2002

Many standards have Published for calculating of current carrying capacity for bare overhead conductors. Although these standards use the same basic heat balance concept, they use different approaches to calculate current carrying capacity, This paper looks at the four approaches used to calculate individual heat balance terms, at the overall impact of these terms on the current carrying capacity And this paper is proposed to the selection of proper standard and AC resistance within a country conditions for calculating the current carrying capacity of bare overhead conductors. So current carrying capacities are Proposed to some of conductors.

• 한국초전도ㆍ저온공학회논문지
• /
• 제19권3호
• /
• pp.1-7
• /
• 2017

It is required to reduce the cost of superconducting cable to realize a superconducting DC power network that covers a wide area in order to utilize renewable energy. In this paper a new concept of innovative cable is introduced that can enhance the current-carrying capacity even though the same superconducting tape is used. Such a cable can be realized by designing an optimal winding structure in such a way that the angle between the tape and magnetic field becomes small. This idea was confirmed by preliminary experiments for a single layer model cable made of Bi-2223 tapes and REBCO coated conductors. Experiments of three and four layer cables of practical sizes were also done and it was found that the current-carrying capacity increased as theoretically predicted. If the critical current properties of commercial superconducting tapes are further improved in a parallel magnetic field, the enhancement will become pronounced and this technology will surely contribute to realization of superconducting DC power network.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.331-334
• /
• 2005

Three RC beams are fabricated and tested to assess the ultimate load-carrying capacity. Depending on the crackings, the flexural stiffness of the RC beams are changed. However, these variations of the flexural stiffness do not influenced on the ultimate load-carrying capacity of the tested beams. Based on the behaviors of RC beams, the validation of the current assessment codes to discussed.

• 조명전기설비학회논문지
• /
• 제30권3호
• /
• pp.53-58
• /
• 2016

The underground transmission lines which have been built to expand the suppling facilities will be continuously accompanying with high growth of the increase of power demand in the metropolitan area in recent years. So, it is necessary to maximize the ability and reliability of power supply with the current-carrying capability of the underground transmission lines. Design criteria of KEPCO is to be presented and used frequently. But it has to be studied about the installation methods of power cable buried in ground. In this study, we used the program for calculating the current-carrying capability of underground transmission power cables. We estimated the maximum permissible current values by the horizontal arrangement in the installation methods of power cable(154kV XLPE $600mm^2$) buried ducts in ground. To see the general tendency of the analysis, we researched a statistical analysis with such parameters as the maximum permissible current values. Through the regression analysis, we analyze the most highly values of the maximum permissible current on the Ra type duct arrangement.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2402-2411
• /
• 2018

Fluoronitriles-$CO_2$ gas mixtures are promising alternatives to $SF_6$ in environmentally-friendly gas-insulated transmission lines (GILs). Insulating gas heat transfer characteristics are of major significance for the current-carrying capacity design and operational state monitoring of GILs. In this paper, a three-dimensional calculation model was established for a GIL using the thermal-fluid coupled finite element method. The calculated results showed close agreement with experimentally measured data. The temperature distribution of a GIL filled with the Fluoronitriles-$CO_2$ mixture was obtained and compared with those of GILs filled with $CO_2$ and $SF_6$. Furthermore, the effects of the mixture ratio of the component gases and the gas pressure on the temperature rise and current-carrying capacity of the GIL were analyzed. Results indicated that the heat transfer performance of the Fluoronitriles-$CO_2$ gas mixture was better than that of $CO_2$ but worse than that of $SF_6$. When compared with $SF_6$, use of the Fluoronitriles-$CO_2$ gas mixture caused a reduction in the GIL's current-carrying capacity. In addition, increasing the Fluoronitriles gas component ratio or increasing the pressure of the insulating gas mixture could improve the heat dissipation and current-carrying capacity of the GIL. These research results can be used to design environmentally-friendly GILs containing Fluoronitriles-$CO_2$ gas mixtures.

• Ocean and Polar Research
• /
• 제42권1호
• /
• pp.21-31
• /
• 2020

Shorebirds migrating along the East Asian-Australasian Flyway (EAAF) have been drastically decreasing due to continuous area loss and quality degradation of intertidal mudflats in the Yellow Sea. Evaluating the current habitat quality by means of habitat carrying capacity estimation could be effective in predicting the magnitude of impacts caused by habitat loss and provide better understanding to improve management strategies. In this study, we estimated the total biomass of Macrophthalmus japonicus, a main prey item of curlews in the Korea peninsular as habitat carrying capacity of the southern intertidal mudflat of Ganghwa Island, one of the key stopover sites for curlews in the EAAF. The result of the estimation took into account spatial differences of prey biomass and the available foraging time by tide patterns. Accordingly, it was found that curlew populations account for 30.26% of the habitat carrying capacity. When we calculated the mean biomass of the area and extrapolated it to the whole area to calculate the total biomass, it was found that the curlews have consumed 10.92% of the total biomass. The results show that the habitat carrying capacity of the southern intertidal mudflat of Ganghwa Island has decreased by 7.8% compared to a study conducted twenty years ago employing the same method. This study shows that there can be considerable differences in the results of habitat carrying capacity estimation between different methods, indicating that various environmental factors that affect the estimation results of habitat carrying capacity must be considered to achieve a more precise analysis and assessment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.328-330
• /
• 1999

This paper was studied on a recent trends for the standard of calculating the cable current-carrying capacity.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.335-338
• /
• 2005

This paper describes a proposal for evaluation load carrying capacity of reinforced concrete slab bridges considering the moment redistribution. Recognition of redistribution of moments can be important because it permits a more realistic appraisal of the actual load-carrying capacity of a structure, thus leading to improved economy. In addition, it permits the designer to modify, within limits, the moment diagrams for which members are to be designed. The predicted results shows that moment redistribution are different from estimated by the current KCI, ACI 318-02, EC2 provisions, and propose reasonable load carrying capacity of the reinforced concrete slab bridge.

• 대한토목학회논문집
• /
• 제7권2호
• /
• pp.107-120
• /
• 1987

본(本) 논문(論文)은 실용적(實用的)인 이차(二次)모멘트 신뢰성이론(信賴性理論)을 사용하여 체계적(體系的)이며 이론적(理論的)인 내하력산정(耐荷力算定) 방법(方法)을 제안(提案)하는데 연구(硏究)의 주안점을 두고 있다. 그리고 교량내하력(橋梁耐荷力) 평가(評價)의 새로운 접근 방법을 본(本) 논문(論文)을 통하여 시도하고자 한다. 이 새로운 방법의 기본개념(基本槪念)은 극심한 주행(走行)트럭하중을 받는 교량(橋粱)의 내하력(耐荷力)의 신뢰성수준(信賴性水準)을 신뢰성지수(信賴性指數) ${\beta}$로 나타내는 데 있다. 본(本) 논문(論文)에서 제안(提案)된 내하력(耐荷力) 판정공식(判定公式)으로 몇 개의 실존교량(實存橋粱)에 대하여 적용하여 보았으며 그 결과(結果)를 현행(現行)의 내하력(耐荷力) 판정공식(判定公式)을 적용하여 얻은 결과(結果)와 비교(比較)하여 보았다. 신뢰성이론(信賴性理輪)에 기초한 교량내하력평가(橋粱耐荷力評價) 공식(公式)은 가까운 장래에 저항(抵抗)과 하중효과(荷重效果)에 대한 기초적(基礎的)인 통계자료(統計資料)가 확보되는 대로 현행(現行)의 내하력평가(耐荷力評價) 방법(方法)에 대치될 수 있을 것으로 판단된다.

• 한국산학기술학회논문지
• /
• 제10권8호
• /
• pp.2032-2037
• /
• 2009

본 논문은 공용중인 교량구조물의 내하력 평가시 획일적이고 실제 거동특성을 적극적으로 활용하지 않아 발생할 수 있는 내하력 평가의 오류에 대하여 연구하였다. 내하력의 평가시 지점의 경계조건과 같은 현재의 거동특성을 반영하기 위하여 초기 결함을 갖는 부재에 대한 좌굴방정식에 처짐을 적용시켜 산정된 축방향력과 처짐에 의해 구해진 모멘트를 고려하여 교량의 내하력을 평가하였다. 기존의 내하력 평가시에 다소 획일적으로 적용되어지는 응력보정 계수를 좌굴방정식을 통하여 각 주형에 대하여 선 반영함으로서 내하력 평가의 오류를 다소 제거하고자 하였다.