• Journal of Bio-Environment Control
• /
• v.13 no.4
• /
• pp.217-225
• /
• 2004

This study was performed to provide the basic knowledge about the mushroom cultivation facilities. Classified current status of cultivation facilities in Gyeongnam province was investigated by questionnaire. The structure of Pleurotus eryngii cultivation facilities can be classified into the simple and permanent frame type. The simple frame structures were mostly single-span type, on the other hand, the permanent frame structures were more multi-span than simple structures. And the scale of cultivation facilities was very different regardless of structural type. But as a whole, the length, width and ridge height were prevailing approximately 20.0 m, $6.6\~7.0m$ and $4.6\~5.0m$ range, respectively. The floor area was about $132\~160\;m^2$, and floor was built with concrete to protect mushrooms from various harmful infection. The roof slope of the simple and permanent type showed about $41.5^{\circ}\;and\;18.6\~28.6^{\circ}$, respectively. The width and layer number of growing bed for mushroom cultivation were around $1.2\~1.6m$, 4 layers in common, respectively. Most of year round cultivation facilities were equipped with cooler, heater, humidifier, and ventilating fan. Hot water boiler was the most commonly used heating system, the next was electric heater and then steam boiler. The industrial air conditioner has been widely used for cooling. And humidity was controlled mostly by ultra-wave or centrifuging humidifier. But some farmers has been using nozzle system for auxiliary purpose. More then $90\%$ of the mushroom house had the independent environment control system. The inside temperature was usually controlled by sensor, but humidity and $CO_2$ concentration was controlled by timer for each growing stage. The capacity of medium bottle was generally 850 cc and 1100cc, some farms used 800 cc, 950 co and 1,250 cc. Most of mushroom producted has been usually shipped to both circulating company and joint market.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.103-113
• /
• 2020

Jack-up drilling rigs are widely used in the offshore oil and gas exploration industry. Although originally designed for use in shallow waters, trends in the energy industry have led to a growing demand for their use in deep sea and harsh environmental conditions. To extend the operating range of jack-up units, their design must be based on reliable analysis while eliminating excessive conservatism. In current industrial practice, jack-up drilling rigs are designed using the working(or allowable) stress design (WSD) method. Recently, classifications have been developed for specific regulations based on the load and resistance factor design (LRFD) method, which emphasises the reliability of the methods. This statistical method utilises the concept of limit state design and uses factored loads and resistance factors to account for uncertainly in the loads and computed strength of the leg components in a jack-up drilling rig. The key differences between the LRFD method and the WSD method must be identified to enable appropriate use of the LRFD method for designing jack-up rigs. Therefore, the aim of this study is to compare and quantitatively investigate the differences between actual jack-up lattice leg structures, which are designed by the WSD and LRFD methods, and subject to different environmental load-to-dead-load ratios, thereby delineating the load-to-capacity ratios of rigs designed using theses methods under these different enviromental conditions. The comparative results are significantly advantageous in the leg design of jack-up rigs, and determine that the jack-up rigs designed using the WSD and LRFD methods with UC values differ by approximately 31 % with respect to the API-RP code basis. It can be observed that the LRFD design method is more advantageous to structure optimization compared to the WSD method.

• Journal of Intelligence and Information Systems
• /
• v.24 no.2
• /
• pp.243-264
• /
• 2018

Although the worldwide battery market is recently spurring the development of lithium secondary battery, lead acid batteries (rechargeable batteries) which have good-performance and can be reused are consumed in a wide range of industry fields. However, lead-acid batteries have a serious problem in that deterioration of a battery makes progress quickly in the presence of that degradation of only one cell among several cells which is packed in a battery begins. To overcome this problem, previous researches have attempted to identify the mechanism of deterioration of a battery in many ways. However, most of previous researches have used data obtained in a laboratory to analyze the mechanism of deterioration of a battery but not used data obtained in a real world. The usage of real data can increase the feasibility and the applicability of the findings of a research. Therefore, this study aims to develop a model which predicts the battery deterioration using data obtained in real world. To this end, we collected data which presents change of battery state by attaching sensors enabling to monitor the battery condition in real time to dozens of golf carts operated in the real golf field. As a result, total 16,883 samples were obtained. And then, we developed a model which predicts a precursor phenomenon representing deterioration of a battery by analyzing the data collected from the sensors using machine learning techniques. As initial independent variables, we used 1) inbound time of a cart, 2) outbound time of a cart, 3) duration(from outbound time to charge time), 4) charge amount, 5) used amount, 6) charge efficiency, 7) lowest temperature of battery cell 1 to 6, 8) lowest voltage of battery cell 1 to 6, 9) highest voltage of battery cell 1 to 6, 10) voltage of battery cell 1 to 6 at the beginning of operation, 11) voltage of battery cell 1 to 6 at the end of charge, 12) used amount of battery cell 1 to 6 during operation, 13) used amount of battery during operation(Max-Min), 14) duration of battery use, and 15) highest current during operation. Since the values of the independent variables, lowest temperature of battery cell 1 to 6, lowest voltage of battery cell 1 to 6, highest voltage of battery cell 1 to 6, voltage of battery cell 1 to 6 at the beginning of operation, voltage of battery cell 1 to 6 at the end of charge, and used amount of battery cell 1 to 6 during operation are similar to that of each battery cell, we conducted principal component analysis using verimax orthogonal rotation in order to mitigate the multiple collinearity problem. According to the results, we made new variables by averaging the values of independent variables clustered together, and used them as final independent variables instead of origin variables, thereby reducing the dimension. We used decision tree, logistic regression, Bayesian network as algorithms for building prediction models. And also, we built prediction models using the bagging of each of them, the boosting of each of them, and RandomForest. Experimental results show that the prediction model using the bagging of decision tree yields the best accuracy of 89.3923%. This study has some limitations in that the additional variables which affect the deterioration of battery such as weather (temperature, humidity) and driving habits, did not considered, therefore, we would like to consider the them in the future research. However, the battery deterioration prediction model proposed in the present study is expected to enable effective and efficient management of battery used in the real filed by dramatically and to reduce the cost caused by not detecting battery deterioration accordingly.

• Tuberculosis and Respiratory Diseases
• /
• v.60 no.3
• /
• pp.304-313
• /
• 2006

Background : Heme oxygenase-1 (HO-1) is an inducible enzyme that catalyzes the oxidative degradation of heme to form biliverdin, carbon monoxide (CO), and free iron. The current evidence has indicated a critical role of HO-1 in cytoprotection and also in other, more diverse biological functions. It is known that the high expression of HO-1 occurs in various tumors, and that HO-1 has an important role in rapid tumor growth because of its antioxidative and antiapoptotic effects. Therefore, the role of HO-1 was analyzed in human lung cancer cell lines, and especially in the A549 cell line. Material and Methods : Human lung cancer cell lines, i.e., A549, NCI-H23, NCI-H157 and NCI-H460, were used for this study. The expression of HO-1 in the untreated state was defined by Western blotting. ZnPP, which is the specific HO inhibitor we used, and the viability of cells were tested for by conducting MTT assaysy. The HO enzymatic activity, as determined via the bilirubin level, was also indirectly measured. Moreover, the generation of intracellular hydrogen peroxide (H2O2) was monitored fluorimetrically with using a scopoletin-horse radish peroxidase (HRP) assay and 2',7'-dichlorofluorescein diacetate (DCFH-DA). We have also transfected small HO-1 interfering RNA (siRNA) into A549 cells, and the apoptotic effects were evaluated by flow cytometric analysis and Western blotting. Results : The A549 cells had a greater expression of HO-1 than the other cell lines, whereas ZnPP significantly decreased the viability of the A549 cells more than the viability of the other lung cancer cells in a dose-dependant fashion. Consistent with the viability, the HO enzymatic activity also was decreased. Moreover, intracellular H2O2 generation via ZnPP was induced in a dose-dependent manner. Apoptotic events were, then induced in the HO-1 siRNA transfected A549 cells. Conclusion : HO-1 provides new important insights into the possible molecular mechanism of the antitumor therapy in lung cancer.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.16 no.3
• /
• pp.147-154
• /
• 2011

Decision making in Environmental Impact Assessment (EIA) and Consultation on the Coastal Area Utilization (CCAU) is footing on the survey reports, thus requires concrete and accurate information on the natural habitats. In spite of the importance of reporting the ecological quality and status of habitats, the accumulated knowledge and recent techniques in ecology such as the use of investigated cases and indicators/indices have not been utilized in evaluation processes. Even the EIA report does not contain sufficient information required in a decision making process for conservation and development. In addition, for CCAU, sampling efforts were so limited that only two or a few stations were set in most study cases. This hampers transferring key ecological information to both specialist review and decision making processes. Hence, setting the effective number of sampling stations can be said as a prior step for better assessment. We introduced a few statistical techniques to determine the number of sampling stations in macrobenthos surveys. However, the application of the techniques requires a preliminary study that cannot be performed under the current assessment frame. An analysis of the spatial configuration of sampling stations from 19 previous studies was carried out as an alternative approach, based on the assumption that those configurations reported in scientific journal contribute to successful understanding of the ecological phenomena. The distance between stations and number of sampling stations in a $4{\times}4$ km unit area were calculated, and the medians of each parameter were 2.3 km, and 3, respectively. For each study, approximated survey area (ASA, $km^2$) was obtained by using the number of sampling stations in a unit area (NSSU) and total number of sampling stations (TNSS). To predict either appropriate ASA or NSSU/TNSS, we found and suggested statistically significant functional relationship among ASA, survey purpose and NSSU. This empirical approach will contribute to increasing sampling effort in a field survey and communicating with reasonable data and information in EIA and CCAU.

• KDI Journal of Economic Policy
• /
• v.13 no.4
• /
• pp.31-57
• /
• 1991

Korean firms of all sizes, from virtually every industry, have used and are using the term "excessive competition" to describe the state of their industry and to call for government interventions. Moreover, the Korean government has frequently responded to such calls in various ways favorable to the firms, such as controlling entry, curbing capacity investments, or allowing collusion. Despite such interventions' impact on the overall efficiency on the Korean economy as well as on the wealth distribution among diverse groups of economic agents, the term "excessive competition", the basis for the interventions, has so far escaped rigorous scrutiny. The objective of this paper is to clarify the notion of "excessive competition" and "over-investment" which usually accompanies "excessive competition", and to examine the circumstances under which they might occur. We first survey the cases where the terms are most widely used and proceed to examine those cases to determine if competition is indeed excessive, and if so, what causes "excessive competition". Our main concern deals with the case in which the firms must make investment decisions that involve large sunk costs while facing uncertain demand. In order to analyze this case, we developed a two period model of capacity precommitment and the ensuing competition. In the first period, oligopolistic firms make capacity investments that are irreversible. Demand is uncertain in period 1 and only the distribution is known. Thus, firms must make investment decisions under uncertainty. In the second period, demand is realized, and the firms compete with quantity under realized demand and capacity constraints. In the above setting, we find that there is "no over-investment," en ante, and there is "no excessive competition," ex post. As measured by the information available in period 1, expected return from investment of a firm is non-negative, overall industry capacity does not exceed the socially optimal level, and competition in the second period yields an outcome that gives each operating firm a non-negative second period profit. Thus, neither "excessive competition" nor "over-investment" is possible. This result will generally hold true if there is no externality and if the industry is not a natural monopoly. We also extend this result by examining a model in which the government is an active participant in the game with a well defined preference. Analysis of this model shows that over-investment arises if the government cannot credibly precommit itself to non-intervention when ex post idle capacity occurs, due to socio-political reasons. Firms invest in capacities that exceed socially optimal levels in this case because they correctly expect that the government will find it optimal for itself to intervene once over-investment and ensuing financial problems for the firms occur. Such planned over-investment and ensuing government intervention are the generic problems under the current system. These problems are expected to be repeated in many industries in years to come, causing a significant loss of welfare in the long run. As a remedy to this problem, we recommend a non-intervention policy by the government which creates and utilizes uncertainty. Based upon an argument which is essentially the same as that of Kreps and Wilson in the context of a chain-store game, we show that maintaining a consistent non-intervention policy will deter a planned over-investment by firms in the long run. We believe that the results obtained in this paper has a direct bearing on the public policies relating to many industries including the petrochemical industry that is currently in the center of heated debates.

• Journal of dental hygiene science
• /
• v.7 no.3
• /
• pp.113-119
• /
• 2007

This study attempts to find factors contributing to the use pattern of prosthetics by investigating the current condition of prosthetics for the aged of over 65 years old by place of practice. Among those of over 65 years old who live in Gangnam-gu, Seocho-gu, Seongbuk-gu, and Gwanak-gu of Seoul and use the apartment senior's center, those having prosthetics were selected as subjects of this study, and this study was conducted in forms of interview and record. Findings of this study are summarized as follows: First, in regard of the state of prosthetics and relevant symptoms in the mouth according to the place of prosthetics practice, there was significant difference in the questions except the medical benefit of prosthetics between unlicensed facilities and dental clinics and hospitals. Second, regarding difference in satisfaction according to the place of prosthetics practice, dental clinics and hospitals showed a higher level of aesthetic satisfaction than unlicensed facilities. For difference in satisfaction at pronunciation, chewing, pain, a sense of foreign body, and holding power, dental clinics and hospitals showed a higher level than unlicensed facilities, Third, after factor analysis on the perception factors of unlicensed treatment and dental treatment, unlicensed facilities showed the highest level of reliability, and then convenience, word of mouth, and modernity in order. Dental clinics and hospitals also showed the highest level of reliability, however, and then convenience, modernity, and word of mouth in order. Fourth, as a consequence of analyzing the factors to influence the use pattern of prosthetics, regarding residential pattern, there were higher possibilities to use dental clinics and hospitals when the subjects lived together with their children and in Gangnam, and the more were the number of pyeong for the residence, pocket money, medical expense, and property in their name, compared to unlicensed facilities. In conclusion, economic factors appear to be the most important factors in selecting facilities for denture prosthodontics. Therefore, it is important to ensure the denture prosthodontics for the elderly are reimbursable so that they can enjoy a healthier life.

• Journal of dental hygiene science
• /
• v.15 no.6
• /
• pp.815-824
• /
• 2015

This study aims to figure out the current state of health insurance education provided to dentists and personnel in charge of insurance claim as well as the effects of experiences in education on their knowledge of health insurance standard and actual application. As a result of analysis on 100 data sheets related to dentistry and 100 data sheets related to personnel in charge of insurance claim (a total of 200 data sheets), following results were generated. Insurance claim personnels showed higher score than dentist in knowledge of health insurance standard and it was significant statistically. Knowledge of insurance claim personnel showed significant differences in educational experiences, in health insurance for the latest three years and average hours of education per session whereas that of dentists did not indicate any significant differences. The level of practical application of dentists was significantly different (p<0.05) according to experiences in insurance claim, and that of insurance claim personnel significantly varied (p<0.05) depending on age, experiences of insurance education and average hours of education. The longer average hours of education, the higher level of practical application. Experiences of insurance education turned out to affect on the knowledge of health insurance standard significantly (p<0.05) on the part of dentists and insurance claim personnel, and the level of experiences in insurance claim and knowledge of health insurance standard on the part of dentists and insurance claim personnel turned out to affect on practical application significantly (p<0.001). Judging from the result, continuous education needs to be conducted in order to enable dentists and insurance claim personnel to maintain the level of knowledge about health insurance and practical application.

• Management & Information Systems Review
• /
• v.38 no.4
• /
• pp.61-78
• /
• 2019

When calculating gains from transfers of assets inherited or donated, the value recognized at the market price as of the date of inheritance or acquisition is recognized as the actual transaction value at the time of acquisition. However, Precedents for the appeal for review by the NTS, the request for adjudgment by the Tax Tribunal(TT) and the request of examination by the Board of Audit and Inspection of Korea(BAI) and the cases of the lawsuit have not shown a consistent results on how much such a the actual transaction value will be measured. This study investigates the operating state of the current tax appeal system using the statistical data of the TT, NTS, and BAI and cases of the lawsuit from 2008 to 2017, and suggests the Improvement of Capital Gains Tax Act on the transfer of inherited and donated property. As a result, total number of requested cases has diminished because cases of the pre-assessment review and the reconsideration appeal by the NTS have decreased steadily over the past decade, while the cases of the lawsuit and the administrative trials(the request for adjudgment by the TT, the appeal for review by the NTS, and the request of examination by the BAI) have been steadily increasing. Also This study found that more than 40% of the complainants proceeded with the cases of the lawsuit proceedings in disagreement with the disposition of tax dissatisfaction under the administrative trials. In addition, Even though the retrospective appraisal price is not recognized as the market price due to the strict interpretation of the tax regulations, it can be seen that it is interpreted as a more expanded concept in the application of the market price than the government office or the tax judge. Therefore, according to the precedents of the cases lawsuit, it is necessary to establish a regulation on the recognition of retroactive appraisal value.

• Journal of Korea Technology Innovation Society
• /
• v.10 no.4
• /
• pp.654-686
• /
• 2007

To estimate and analyze an interested science and technology level in any case requires three basic informations: (1) relative positions of our technology level, (2) other relevant technology level of the world best country holding the state of the art technology, and (3) its theoretical or practical maximum level within a certain period of time. Further, additional information from analyzing its respective rate of technology changes is necessary. It seems that most previous empirical or case studies on technology level have not considered third and fourth informations seriously, and thus critically have missed important findings from a dynamic point of view on the matter. A dynamic approach considering types of development processes and paths as well as current position needs an application of a concept of technology development stages and respective growth curves. This paper proposes a new method of approach and application by implementing relatively simple types of the growth curve(S-curve) such as logistic and Comports curves and applying estimation results of these curves to ten core technologies of the growth engines for the next future generation in Korea. The study implies that Korean science and technology level in general clearly gets higher as it approaches to a recent time of period, but relative technology gap from the world best in terms of catching-up period does not get better or narrower in case of at least part of the concerned technologies such as bio new drugs and human organs, and intelligence robots. The possibility does exist that some of our concerned technologies shooting for the next future generation may not come to the world highest level in the near future. The purpose of this study is to propose possibilities of catching-up, if any, by estimating its relevant type of growth pattern by way of measuring and analyzing technology level and by analyzing the technology development process through a position analysis. At this stage this study tries to introduce a new theoretical approach of estimating technology level and its application to existing case study results(data) from Korea Institute of Science and Technology Planning and Evaluation(KISTEP) and Korea Institute of Industrial Technology Evaluation and Planing(ITEP), for years of 2004 and 2006 respectively. The study has some limitations in terms of accuracy of measuring(estimating) a relevant growth curve to a particular technology, feasibility of applying estimated results, accessing and analyzing panel experts opinions. Hence, it is recommended that further study would follow soon enough to verify practical applicability and possible expansion of the study results.