• Korean Journal of Mathematics
• /
• 제18권4호
• /
• pp.425-440
• /
• 2010

Using Green's theorem, elliptic boundary value problems can be converted to boundary integral equations. A numerical methods for boundary integral equations are boundary elementary method(BEM). BEM has advantages over finite element method(FEM) whenever the fundamental solutions are known. Helmholtz type equations arise naturally in many physical applications. In a boundary integral formulation for the exterior Neumann there occurs a hypersingular operator which exhibits a strong singularity like $\frac{1}{|x-y|^3}$ and hence is not an integrable function. In this paper we are going to remove this hypersingularity by reducing the regularity of test functions.

• 한국전자파학회논문지
• /
• 제10권6호
• /
• pp.935-950
• /
• 1999

A multiresolution time-domain analysis scheme is derived for the analysis of microwave structures by using Haar wavelets to discretize the Maxwell's curl equation. This technique requires less computational effort than the conventional FDTD method because larger space grid can be used in the simulations. To validate this scheme, several 2-D·3-D microwave structures are simulated and the results are compared with those of the conventional FDTD scheme.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 제14회 정기총회 및 03년 동계학술발표회
• /
• pp.310-311
• /
• 2003

비선형 Kerr 매질에서 광파의 전파 특성을 해석하기 위해 지금까지 다양한 수치해석 방법들이 연구되어오고 있다 그중 FDTD 방식은 시간의 종속적인 Maxwell curl 방정식에 대해 어떠한 시간적, 공간적 근사를 사용하지 않고 광파의 전파 특성을 시뮬레이션하기 위해 유도되었기 때문에 산란과 같은 종축방향 불연속 문제나 비종축 파의 전파 특성 문제에 대해 보다 신뢰성 있는 해석 결과를 얻을 수 있으며, 비선형 Kerr 매질에서의 광파의 전파 특성에 대해서 보다 정확한 해석이 가능하다고 알려져 있다. (중략)

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제29권1호
• /
• pp.103-112
• /
• 2022

A definition of fractional vector cross product of two vectors in Euclidean 3-space is presented. The formulas for Euclidean norm of the fractional vector cross product of two vectors, and for fractional triple vector cross product are obtained.

• Journal of the korean society of oceanography
• /
• 제34권1호
• /
• pp.1-21
• /
• 1999

A two-layer quasi-geostrophic numerical model is used to investigate the temporal variability of the East Korea Warm Current (EKWC), especially the separation from the Korean coast and the generation of warm eddies. An attention is given on the active role of the nonlinear boundary layer process. For this, an idealized flat bottom model of the East Sea is forced with the annual mean wind curl and with the inflow-outflow specified at the Korea (Tsushima) and Tsugaru Straits. Two types of separation mechanisms are identified. The first one is influenced by the westward movement of the recirculating leg of the EKWC (externally driven separation),the second one is solely driven by the boundary layer dynamics (internally driven separation). However, these two processes are not independent, and usually coexist. It is hypothesized that 'internally driven separation' arises as the result of relative vorticity production at the wall, its subsequent advection via the EKWC, and its accumulation up to a critical level characterized by the separation of the boundary flow from the coast. It is found that the sharp southeastern corner of the Korean peninsula provides a favorable condition for the accumulation of relative vorticity. The separation of the EKWC usually accompanies the generation of a warm eddy with a diameter of about 120 km. The warm eddy has a typical layer-averaged velocity of 0.3 m/s and its lifespan is up to a year. In general, the characteristics of the simulated warm eddy are compatible with observations. A conclusion is therefore drawn that the variability of the EKWC is at least partially self-excited, not being influenced by any sources of perturbation in the forcing field, and that the likely source of the variability is the barotropic instability although the extent of contribution from the baroclinic instability remains unknown. The effects of the seasonal wind curl and inflow-outflow strength are also investigated.

• 원예과학기술지
• /
• 제29권4호
• /
• pp.336-344
• /
• 2011

Using the abundant available information about the tomato genome, we developed DNA markers that are linked to disease resistant loci and performed marker-assisted selection (MAS) to construct multi-disease resistant lines and varieties. Resistance markers of Ty-1, T2, and I2, which are linked to disease resistance to Tomato yellow leaf curl virus (TYLCV), Tomato mosaic virus (ToMV), and Fusarium wilt, respectively, were developed in a co-dominant fashion. DNA sequences near the resistance loci of TYLCV, ToMV, and Fusarium wilt were used for primer design. Reported candidate markers for powdery mildew-resistance were screened and the 32.5Cla marker was selected. All four markers (Ty-1, T2, I2, and 32.5Cla) were converted to cleavage amplification polymorphisms (CAPS) markers. Then, the CAPS markers were applied to 96 tomato lines to determine the phenetic relationships among the lines. This information yielded clusters of breeding lines illustrating the distribution of resistant and susceptible characters among lines. These data were utilized further in a MAS program for several generations, and a total of ten varieties and ten inbred lines were constructed. Among four traits, three were introduced to develop varieties and breeding lines through the MAS program; several cultivars possessed up to seven disease resistant traits. These resistant trait-related markers that were developed for the tomato MAS program could be used to select early stage seedlings, saving time and cost, and to construct multi-disease resistant lines and varieties.

• The Plant Pathology Journal
• /
• 제27권4호
• /
• pp.378-384
• /
• 2011

Tomato yellow leaf curl virus (TYLCV), a member of genus Begomovirus, was isolated in Korea in 2008. We sequenced and analyzed the DNA-A of 51 TYLCV isolates from Korea, and 13 of the TYLCV isolates were selected as type representatives of TYLCV from six Korean provinces. The 13 TYLCV isolates were classified into Korea Group 1 (KG1, nine isolates) and Korea Group 2 (KG2, four isolates) based on the results of phylogenetic analysis and genome size (2774 and 2781 nucleotides, respectively). A recombination detection program 3 (RDP3) revealed two recombinations between the TYLCV Korea isolates and other TYLCV isolates [Thailand (AF206674), Iran (AJ132711), and Israel (X76319)]. TYLCV Jeju isolate was characterized by two recombination events (E1 and E2) caused by the presence of E1 in ORF V1 and C3, which may seem to be the mutations of the high nucleotide transversion and transition rate. Collectively, our results suggest that the occurrence of nucleotide transversions and transitions in TYLCV DNA-A might have induced novel recombination events within the TYLCV Korea isolates.

• 한국패션뷰티학회지
• /
• 제4권3호
• /
• pp.13-17
• /
• 2006

Perm is one the of the most common thing in a beauty salon like hair-cut and hair perm needs processing solutions which is chemical substances. Those chemical substances damage the hair cuticle. Damaged hair cuticles with mistakes of perm will follow with the next performance and it will cause more damage to hair. As damage of hair cuticle become worse, it is harder to recover the hair cuticle like before. Therefore, this study shows that plain rinse is the way to reduce the damage of hair cuticle with perm as much as possible. With experiments, I suggest the right way to do plain rinse to satisfy customers' demand and reduce the damage. During the research, I figured that plain rinse with the knowledge, structure of hair cuticle, principle of perm and plain rinse, is very needed. The hair with plain rinse have more elastic curl and have less scales which came off from hair cuticle than the hair without plain rinse. This experiment concludes that hairdresser has to figure out about the time, temperature and type of water depends on the degree of damaged hair of customers. In order to perm, there is no way to not to use chemical substances to perm. Therefore, hairdresser has to choose suitable processing solutions and right steps, and as this is the age of 'well-being' boom, hairdresser must try to keep the healthy hair. Consequently, in order to meet the demands and conditions of customers, hairdresser needs to find the right method to do plain rinse and use the method in perm.

• 펄프종이기술
• /
• 제30권2호
• /
• pp.47-54
• /
• 1998

Refining is one of the most important processes of fiber treatment that provides optical and physical properties of final paper products. The evaluation method of refining progress is usually freeness (CSF) or wetness (SR) test because of its rapidity and convenience. However, there are some deficiencies in using freeness or wetness test to evaluate pulp fibers accurately because its results are more influenced by fines contents than extent of fibers treatment. The objective of this study is to show the deficiency of wetness in evaluating the refining process. For this, beating is done by varying the beating load. Handsheets are made after beating until 25 and $32^{\circ}C$ SR, and then paper properties are measured. Refined fibers are analyzed by fiber length, fines contents, curl, kink, WRV, and zero-span tensile strength. The results show that longer beating time is required to reach the same wetness at lower beating load. There are differences in the average fiber length, distribution curve of fiber length, fines contents, curl, kink, WRV of long fiber fraction, drainage time, and zero-span tensile strength of rewetted sample at different beating load. At the low beating load in the same wetness, apparent density, breaking length, burst strength, and tear strength are higher, while opacity and air permeability are lower than those of the high beating load. Using Page s equation, which shows the relationship among tensile strength, intrinsic fiber strength, and interfiber bonding strength, interfiber bonding strength is calculated and analyzed to explain final paper properties. At $25^{\circ}C$ SR, interfiber bonding strength is only slightly higher at 2.5kgf beating load, while the intrinsic fiber strength is substantially higher. At $32^{\circ}C$ SR, intrinsic fiber strength is a little bit higher at 2.5kgf beating load, and interfiber bonding strength is remarkably higher than those of 5.6kgf beating load. These results can be used to explain the different properties of the final paper at selected beating loads.

• 한국산학기술학회논문지
• /
• 제11권9호
• /
• pp.3277-3283
• /
• 2010

본 연구에서는 콜라겐의 처방이 퍼머넌트웨이브 시술시 미치는 영향을 알아보기 위하여 정상모에 콜라겐을 농도별 처방한 퍼머넌트웨이브제로 퍼머넌트웨이브를 시술한 후 모발에 컬의 형성력, 굵기 관찰, 인장 강도, 메틸렌블루 흡광도, 수분 감소량 등의 변화를 측정하여 비교분석하였다. 결론적으로 퍼머넌트웨이브제의 콜라겐 처방 여부에 따라 모발의 굵기, 모발의 인장강도, 모발의 수분 감소량, 흡광도가 처방하지 않은 환원제에 대비하여 감소하였으며, 처방된 콜라겐의 농도가 증가할수록 모발의 손상도가 줄어드는 결과를 보였다. 그러나 콜라겐의 농도의 크기가 커질수록 퍼머넌트웨이브 시술시 컬의 형성력이 떨어지는 결과가 나타났다. 그러므로 퍼머넌트웨이브 시술시 모발의 손상도를 줄이기 위한 콜라겐 처방 농도는 2%가 적당하였다.