• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.185-188
• /
• 2001

In this study, the characteristics of freezing and thawing resistance, the compressive strength, and the change in height of cement mortar according to a steam and taler curing conditions has been studied. To this end, the major test variables include the period of the early curing, curing temperature and the later curing. The strength test as well as volume variousness have been conducted to explore the characteristics of freezing and thawing resistance on the curing conditions. The experimental results can be efficiently used to improve the characteristics of freezing and thawing resistance for concrete products carrying steam curing.

• 한국연초학회지
• /
• 제20권2호
• /
• pp.231-237
• /
• 1998

This study was carried out to investigate the effects of curing methods on the concentration of ammonia during curing in burley tobacco leaves. The air-cured tobacco(KB108; Nicotiana tabacum L.) was grown at Chonju Tobacco Experiment Station in 1998 and the tenth leaves from the top on the stalk were harvested. Half of the harvested leaves were cured in normal air curing facility and the other leaves were cured in excessive curing facility. Stalk cut tobaccos were cured in horizontal curing facility. The leaves were sampled every five days from harvesting time to the end of curing(25 days). Ammonia concentration of leaves increased during curing period with a remarkable increase at yellowing stage. The concentration of ammonia was high in the primed cured leaves, while that of the excessive cured leaves was low. It is considered that the lower increase of ammonia in stalk cured leaves may be caused by the translocation from the leaves to the stalk during curing, while that of excessive cured leaves may be caused by the poor decomposition of protein and amino acid during curing by excessive moisture loss and high temperature condition.

• 한국건축시공학회지
• /
• 제18권1호
• /
• pp.33-40
• /
• 2018

우리나라의 많은 건설 공사에서는 건축물이 고층화 되면서, 공기단축 및 물의 처리 곤란 등의 이유로 고강도 콘크리트일지라도 습윤양생을 실시하지 않고 공사를 진행하는 경우가 존재한다. 이와 같이 건조 상태로 양생하게 되면 압축강도 감소, 건조수축 및 자기수축 등 수축변화가 크게 증가할 것으로 예상된다. 또한 본 연구팀에서는 기존의 연구로서 유지류를 콘크리트에 혼합할 경우 비누화 반응을 이용하여 콘크리트의 자기수축 저감 및 내구성 향상에 대한 연구를 진행한바 있다. 그러므로 본 연구에서는 양생방법을 비양생 건조, 유화처리정제식용유(ERCO) 도포 후 건조, 7일 수중양생 후 건조 및 28일 수중양생 후 건조 등 양생 방법 변화에 따른 혼화재 다량치환 모르타르의 압축강도 특성, 수분증발에 따른 수축변화 특성에 대하여 분석하였다. 실험결과는 양생방법으로 비양생 건조를 실시하게 되면 28일 수중양생을 실시하였을 경우보다 약 50% 전후의 강도저하와 1.9배의 수축 길이변화율 증가로 나타나, 혼화재 다량치환 고강도 모르타르에 있어 습윤양생이 매우 중요하게 영향을 미치는 것을 알 수 있었다. 단, ERCO 도포의 경우는 강도 및 수축변화측면에서 무양생인 건조보다는 우수하지만 7일 수중양생 후 건조보다는 성능이 저하하는 것으로 나타났다.

• 한국연초학회지
• /
• 제18권1호
• /
• pp.49-53
• /
• 1996

This experiment was carried out to study the effect of oxygen on chemical composition and physical properties of tobacco leaves during flue-curing. The results obtained were as follows: Starch content decreased and sucrose content increased with increasing oxygen supply during curing. Glucose and fructose of the cured leaves showed high content at the 5-10% oxygen supply. Amino-N and nitrate-N increased with increasing oxygen supply. Total nitrogen and NH4-N showed the lowest value at the 5-10% and 10-15% oxygen supply in the cutters and leaf, respectively. Chlorophyll and chlorogenic acid increased, and total volatile base decreased with increasing oxygen supply. The activity of α-amylase increased at the latter period of flue-curing, and the maximum activity point were delayed 12 hours with increasing oxygen supply. Shatter index of cured leaves decreased with increasing oxygen supply. It was desirable to supply oxygen during flue-curing for the improvement of chemical and physical properties such as starch, total sugar, chlorogenic acid, and shatter index of cured leaves.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.107-108
• /
• 2011

The purpose of present study is to examine the application of effective curing to hardener-free epoxy-modified mortars. The epoxy-modified mortars are prepared with polymer-cement ratios, subjected to two types of curing conditions, and tested for compressive, flexural and tensile strengths. As a result, hardener-free epoxy-modified mortars with steam curing is markedly improved with increasing air-dry curing period. High strength development of the epoxy-modified mortars may be achieved by the dense microstructure by cement and the hardener of the epoxy resin in the mortars.

• 한국연초학회지
• /
• 제5권2호
• /
• pp.9-15
• /
• 1983

The effect of leaf dehydration process and air flow capacity of bulk curing on physical properties and composition of cured leaves was studied, respectively, during flue- curing. Cured leaves from excessive moisture during yellowing stage and those from rapid dehydration Process inevitably during later stages, tend towards lower equilibrium moisture contents, higher shatter index, hither protein nitrogen, and leaf scalding or deterioration of Beaves with redish cast. Early dehydration at the yellowing stage re suited in increasing of p Bamitic, stearic, linoleic, and linolenic acid contents, but showed reduction of brightness difference between upper and lower surface of the cured leaves, Leaf surface lipid decreased with the progress of curing stages, more conspicuously during later stage. Lowering air flow capacity of fan by 50oye during stem drying stage resulted in increasing of leaf surface lipid and 25oye decreasing of electric power consumption , but curing period and kerosene consumption were not affected.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.491-494
• /
• 2005

This study was carried out to examine application of surface adiabatic curing method in slightly cold weathering period. So, early aged freezing damage and compressive strength of concrete were examined through temperature analysis of construction concrete. Temperature analysis was carried out according to the average temperature, concrete placement completion time and surface adiabatic curing method. Analysis results show that additional curing plans are demanded in concrete construction below 0$^{circ}C$, surface adiabatic curing method is could apply in the average temperature more than -2$^{circ}C$ and curing method as heating are needed under -2$^{circ}C$.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.45-46
• /
• 2023

This study examined the curing temperature of concrete with a photothermal insulation sheet to shorten the curing time of concrete as part of construction cost and period reduction. According to the experiment results, the heating performance effect is confirmed through the temperature difference between photothermal insulation sheet and bubble sheet. And it has a high curing temperature in the order of bubble sheet (photo heating material B) > bubble sheet (photo heating material A) > bubble sheet on same layers.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.153-154
• /
• 2023

In this study, analyzed the difference in compressive strength of concrete under cold conditions, using the 28-day standard curing compressive strength as a reference and examining variations based on cement types and curing temperatures. The results showed that the strength difference based on curing temperatures reached up to 9MPa at 0℃. However, as the curing period progressed, the difference in strength due to curing temperature gradually diminished. These findings are anticipated to be valuable for concrete mixing and quality control in cold weather conditions.

• 한국건설순환자원학회논문집
• /
• 제6권4호
• /
• pp.259-266
• /
• 2018

본 연구에서는 3가지 수준의 재령(28일, 91일, 365일)을 고려하고 OPC 콘크리트와 GGBFS 콘크리트를 대상으로 콜드조인트 콘크리트의 탄산화 거동 및 강도특성을 평가하였다. GGBFS 콘크리트의 압축강도는 91일에서 OPC 콘크리트의 86% 수준이었으나, 지속적인 수화반응으로 인해 재령 365일 재령에서는 107%로 높게 평가되었다. 탄산화 속도계수는 91일을 기점으로 OPC 및 GGBFS 콘크리트 모두 크게 감소하였으며 콜드조인트 효과는 OPC 콘크리트에서 크게 평가되지만 GGBFS 콘크리트에서는 비슷한 수준으로 평가되었다. 콜드조인트에서 OPC 콘크리트의 경우 28일에서는 1.06배, 365일에서는 1.33배 수준으로 탄산화 속도계수가 증가하였다. 그러나 GGBFS 콘크리트의 경우 28일에서는 1.08배, 재령 365일에서는 1.04배로 큰 차이가 발생하지 않았다.