• 대한소아치과학회지
• /
• 제31권3호
• /
• pp.391-399
• /
• 2004

현재 복합레진의 중합에 사용되는 광원으로 할로겐광 중합기, 플라즈마 아크 중합기, 레이저, LED 등이 사용되고 있으나 광조사에 따른 온도 증가와 중합 깊이 등이 수복치과학의 오랜 관심이었다. 본 연구의 목적은 광원에 따라 얼마나 온도 증가가 일어나는지, 그리고 중합 깊이에 따른 표면경도를 측정함으로써 전통적인 할로겐광 중합기에 대해 새로 개발된 중합기의 중합능력을 비교 평가하는 것이다. 기존의 할로겐광 중합기(Optilux 360)에 대해 최근 시판되는 플라즈마 아크 중합기(Flipo), 열 발생을 감소시킨 플라즈마 아크 중합기(Aurys), LED(Starlight), 그리고 중합시간을 감소시킨 고강도 LED(Freelight 2) 등을 광원으로 사용하였다. 우선 상온$(23^{\circ}C)$에서 각 중합기 표면의 온도를 측정한 후 각각 2, 3, 4mm의 테플론 mold에 레진(Z-100, $A_2\;Shade$)을 충전하고 하면에서 중합시 최고 온도를 측정하였으며 각 시편 상, 하면의 미세경도를 측정하여 다음과 같은 결론을 얻었다. 1. 중합기 표면의 온도를 측정한 결과 Flipo가 평균 $52.4^{\circ}C$로 가장 높았고 Freelight $2(37.86^{\circ}C),\;Optilux\;360(32.68^{\circ}C),\;Aurys(32.34^{\circ}C),\;Starlight(26.14^{\circ}C)$ 순으로 낮게 나타났다. 2. 복합레진을 2, 3, 4mm 테플론 mold에 채우고 중합시 온도 변화를 측정한 결과 Flipo와 Freelight 2가 유사하게 가장 높았고 Optilux 360과 Aurys가 유사하게 그 다음이었으며 Starlight가 가장 낮게 나타났다. 3. 복합레진 상면의 미세경도는 전반적으로 유사하였으나 Aurys로 중합한 군에서 약간 낮게 측정되었다. 4. 복합레진 하면의 미세경도는 2, 3, 4mm모두에서 Optilux 360과 Freelight 2로 중합한 군에서 유사하게 가장 높았고 그 다음이 Flipo, Starlight 순이었으며 Aurys로 중합한 군에서 가장 낮게 측정되었다. 연구 결과에서 볼 때 Flipo와 Freelight 2를 주의깊게 사용한다면 중합도와 시간면에서 임상적으로 유용하게 사용될 수 있으리라 사료된다.

• 한국건설순환자원학회논문집
• /
• 제3권3호
• /
• pp.228-236
• /
• 2015

본 연구는 폐유지류를 중심으로 한 도포제 종류 및 도포시기에 따른 혼화재 다량치환 콘크리트의 탄산화 및 염해저항성에 미치는 영향에 관하여 실험 연구한 것이다. 즉 내구성 향상방안으로서, 도포시기를 탈형 즉시와 28일 수중양생후의 변화를 주고 도포제는 Plain인 Control을 포함한 ERCO(유화처리정제유지류), RCO(정제유지류), WR(발수제), ERCO+WR의 5가지 수준에 대하여 비교 실험을 실시하였다. 실험결과 도포시기에 따른 탄산화 및 내염해 저항성의 경우 28일 수중양생 후 도포의 경우 탄산화 및 염화물 침투 깊이가 감소하는 것을 알 수 있었고, 또한, 도포제는 ERCO, RCO, ERCO+WR, WR의 순으로 탄산화 및 염화물 침투깊이가 늦게 진행되어, 특히 ERCO의 도포가 탄산화 및 염화물 억제효과에 가장 우수한 것을 알 수 있었다.

• 한국해안해양공학회지
• /
• 제15권2호
• /
• pp.71-79
• /
• 2003

본 논문에서는 염소이온 침투해석에 사용되는 염소이온 확산계수. 염소이온 고정화 관계식, 증발가능 수량에 대한 일반 예측식들을 제시하였다. 이러한 식들을 염소이온 확산 모델링에 대입하여 그 식들의 유효성을 검토하였다. 상대습도와 양생온도의 염소이온 확산에 대한 영향은 주로 확산계수를 변화시켜 고려한다. 상대습도가 증가하면 염소이온 확산깊이는 증가하고 재령이 경과할수록 상대습도가 확산깊이에 미치는 영향은 커진다. 반면에, 양생온도가 증가하면 확산깊이가 조금 증가하지만 재령이 경과할수록 양생온도가 확산깊이에 미치는 영향은 감소한다. 한편, 염소이온의 고정화에 영향을 미치는 시멘트의 $C_3$A양이 증가하면 표면에서는 고정염소이온의 증가로 인해 전체 염소이온량이 증가하지만 깊이가 깊어질수록 확산되는 자유염소이온의 감소로 인해 전체 염소이온량이 감소한다. 물-시멘트비가 감소하면 염소이온의 확산깊이는 급격히 감소하고 염소이온의 확산을 막는 가장 효과적인 방법은 물-시멘트비를 감소시키는 것임을 알 수 있다

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권4호
• /
• pp.50-55
• /
• 2007

Stereolithography (SLA) is a technique using a laser beam to cure a photopolymer liquid resin with three-dimensional computer-aided design (CAD) data, The accuracy of the prototype, the build time, and the cured properties of the resins are controlled by the SLA process parameters such as the size of the laser beam, scan velocity, hatch spacing, and layer thickness, In particular, the size of the laser beam is the most important parameter in SLA, This study investigated the curing properties of photopolymers as a function of the laser beam size, The cure width and depth were measured either on a single cure line or at a single cure layer for various hatch spacings and laser beam sizes, The cure depth ranged from 0.23 to 0.34 mm and was directly proportional to the beam radius, whereas the cure width ranged from 0.42 to 1.07 mm and was inversely proportional to the beam radius, The resulting surface roughness ranged from 1.12 to $2.23{\mu}m$ for a ratio of hatch spacing to beam radius in the range 0.5-2.0 at a beam radius of 0.17 mm and a scan velocity of 125 mm/sec.

• Architectural research
• /
• 제4권1호
• /
• pp.39-44
• /
• 2002

Recently, the coal-ash production has been increased by increase of consumption of electric power. So it is important to secure a reclaimed land from pollution and develop practical application of coal ash. This is an experimental study to compare and analyze the properties of concrete using high volume of coal ash (including fly ash and bottom ash) as a part of fine aggregate. For this purpose, the mix proportions of concrete according to replacement ratio of coal ash (10, 20, 35, 50%) were selected. And then air content, slump, setting time, bleeding content, chloride content, compressive strength and carbonation test were performed. According to test results, it was found that the bleeding content of concrete using the coal ash decreased according to increase of replacement ratio. And the chloride content of concrete using the bottom ash as a part of fine aggregate increased as the replacement ratio of bottom ash increased, but it is satisfied with the total chloride content of concrete recommended by KCI - $0.3kg/m^3$ below. Also, the compressive strength of concrete using the bottom ash was similar to that of plain concrete(BA 0) after 28days of curing and the carbonation depth of concrete increased as the replacement ratio increased. However, the carbonation depth of concrete using the fly ash decreased as the replacement ratio of fly ash increased.

• Geomechanics and Engineering
• /
• 제12권5호
• /
• pp.771-783
• /
• 2017

Using a transparent fracture replica with aperture size and water-cement ratio (w/c), the factors affecting the penetration behavior of rock grouting were investigated through laboratory experiments. In addition, the waterproof efficiency was estimated by the reduction of water outflow through the fractures after the grout curing process. Penetration behavior shows that grout penetration patterns present similarly radial forms in all experimental cases; however, velocity of grout penetration showed clear differences according to the aperture sizes and water-cement ratio. It can be seen that the waterproof efficiency increased as the aperture size and w/c decreased. During grout injection or curing processes, air bubbles formed and bleeding occurred, both of which affected the waterproof ability of the grouting. These two phenomena can significantly prevent the successful performance of rock grouting in field-scale underground spaces, especially at deep depth conditions. Our research can provide a foundation for improving and optimizing the innovative techniques of rock grouting.

• 대한소아치과학회지
• /
• 제24권1호
• /
• pp.139-147
• /
• 1997

Argon laser used in this case report, is special in having two wavelength of 488, 514nm blue-green visible light spectrum. Blue light is used for composite resin polymerization and caries detection. Green light is used for soft tissue surgery and coagulation. Maximum absorption of this laser light occurs in red pigmentation such as hemoglobin. The argon laser may be well-suited for selective destruction of blood clots and hemangioma with minimal damage to adjacent tissues. Argon laser light penetrates tissue to the 1 mm depth, so its thermal intensity is lower than $CO_2$ laser light. Also, due to its short wavelength it can be focused in a small spot and even single gene can be excised by this laser and microscopy. After applicating argon laser to 4 patient for surgical procedure and to 1 patient for curing the composite resin, following results were obtained. 1. Improved visibility were gained due to hemostasis and no specific technique were needed according to easy recontouring of the tissue. 2. Ability to use by contact mode, tactile sense was superior but tissue dragability and accumulation of tissue on the tip needed sweeping motion. 3. Additive local anesthetic procedure was needed. 4. No suture and less curing time reduced chair time, this made argon laser available in pediatric dentistry.

• Computers and Concrete
• /
• 제13권1호
• /
• pp.31-47
• /
• 2014

This research is focused on obtaining the fracture property of steel fiber reinforced concrete(SFRC) specimens at early ages of 1, 2, 3 and 7-day, respectively. For this purpose, three point bending tests of nine groups of SFRC beams with notch of 40mm depth and different steel fiber ratios were conducted. The experimental results of early age specimens were compared with the 28-day hardened SFRC specimens. The test results indicated that the steel fiber ratios and curing age significantly influenced the fracture properties of SFRC. A reasonable addition of steel fiber improved the fracture toughness of SFRC, while the fracture energy of SFRC developed with curing age. Moreover, a quadratic relationship between splitting strength and fracture toughness was established based on the experiment results. Additionally, afinite element (FE) method was used to investigate the fracture properties of SFRC.A comparison between the FE analysis and experiment results was also made. The numerical analysis fitted well with the test results, and further details on the failure behaviors of SFRC could be revealed by the suggested numerical simulation method.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.264-265
• /
• 2014

Currently, CO₂ existed in the air usually reacts concrete, and then CaCO₃ can be appeared. As time goes by, pH of concrete is decreased and corrosion of steel can be happened. This phenomenon is called carbonation. For preventing carbonation of concrete, various methods like using corrosion inhibitor, high compressive strength concrete, and enough covering depth are adopted. But these method are usually passive methods focused on corrosion of steel and have limitation on economic. Thus, as basic study for active method of carbonation, cement pastes with CO₂ reactive material (γ-C₂S, MgO) and GBFS were in accelerated carbonation, and the compressive strengths were measured. On the result, the compressive strength was improved better than non-carbonation. Through measuring the weight change using TG-DTA, as specimens were carbonated, according to decreasing of Ca(OH)₂ and Mg(OH)₂, CaCO₃ and MgCO₃ were increased. Therefore it can be shown that carbonation curing can be realized.

• 한국정밀공학회지
• /
• 제30권8호
• /
• pp.878-884
• /
• 2013

Stereolithography can be classified into two main categories according to the cross-sectional shape: scanning type and projection type. Projection stereolithography has significant advantages when making a layer using a single patterned beam, and results in improved speed and accuracy. To implement relatively low-cost projection stereolithography, we developed a system using a commercially available resin, which cures on exposure to visible light. The optimum photoinitiator was investigated, as well as the mixing ratio. The viscosity, shrinkage, curing depth and tensile strength were evaluated through several experiments on fabricated three-dimensional structures, and thus an optimal resin selection system was developed.