Browse > Article
http://dx.doi.org/10.7736/KSPE.2013.30.8.878

Curing Characteristics for Projection Stereolithography based on LCD and Visible LED  

Kim, Ga Young (School of Mechanical Engineering, Pusan National Univ.)
Ha, Young Myoung (School of Mechanical Engineering, Pusan National Univ.)
Park, In Baek (CA Tech Co. Ltd.)
Kim, Min Sub (School of Mechanical Engineering, Pusan National Univ.)
Jo, Kwang Ho (School of Mechanical Engineering, Pusan National Univ.)
Lee, Seok Hee (School of Mechanical Engineering, Pusan National Univ.)
Publication Information
Journal of the Korean Society for Precision Engineering / v.30, no.8, 2013 , pp. 878-884 More about this Journal
Abstract
Stereolithography can be classified into two main categories according to the cross-sectional shape: scanning type and projection type. Projection stereolithography has significant advantages when making a layer using a single patterned beam, and results in improved speed and accuracy. To implement relatively low-cost projection stereolithography, we developed a system using a commercially available resin, which cures on exposure to visible light. The optimum photoinitiator was investigated, as well as the mixing ratio. The viscosity, shrinkage, curing depth and tensile strength were evaluated through several experiments on fabricated three-dimensional structures, and thus an optimal resin selection system was developed.
Keywords
Visible light resin; Projection Stereolithography; Liquid Crystal Device(LCD); Visible Light Emitting Diode;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Li, Y., Li, D., and Lu, B., "Introduction to Sterelithography and its Application," Jounal of Applied Optic, Vol. 9, No. 3, pp. 34-36, 1999.
2 Park, I. B., Choi, J. W., Ha, Y. M., and Lee, S. H., "Multiple Fabrications of sacrificial Layers to Enhance the Dimensional Accuracy of Microstructures in Maskless Projection Microstereolithography," Int. J. Precis. Eng. Manuf., Vol. 10, No. 1, pp. 91-98, 2009.
3 Pham, D. T. and Ji, C., "Design for Stereolithography," Journal of Mechanical Engineering Science, Vol. 214, No. 5, pp. 635-640, 2000.   DOI   ScienceOn
4 Knitter, R., Bauer, W., Gohring, D., and Risthaus, P., "RP process Chains for Ceramic Microcomponents," Rapid Prototyping Journal, Vol. 8, No. 2, pp. 76-82, 2002.   DOI   ScienceOn
5 Yoon, S. H., Park, I. B., Kim, M. S., Jo, K. H., and Lee, S. H., "Development of Projection Scanbeam- SLA using Liquid Crystal Display and visible Light Emitting Diode," J. Korean Soc. Precis. Eng., Vol. 30, No. 3, pp. 340-348, 2013.   과학기술학회마을   DOI   ScienceOn
6 Park, I. B., Lee, D. S., Ha, Y. M., and Lee, S. H., "Development of large area rapid prototyping using scanning beam method and LCD (liquid crystal display) module," Proc. of KSPE Autumn Conference, pp. 383-384, 2011.
7 Yoon, S. H., Park, I. B., Lee, D. S., and Lee, S. H., "A study of control for curing ability of patterned visible beam through LCD (liquid crystal display)," Proc. of KSPE Autumn Conference, pp. 371-372, 2011.
8 Chitec Technology Co. Ltd., www.chitec.com
9 Roffey, C. G., "Photogeneration of Reactive Species for UV Curing," John Wiley & Sons. Ltd., 1997.
10 Lee, Y. M., Seo, D. H., and Kwon, S. G., "High Polymer Chemistry," SciTech Media. Inc., 2004.