• Elastomers and Composites
• /
• 제50권2호
• /
• pp.87-91
• /
• 2015

Cure characteristics of non-oil-extended solution SBR (S-SBR_NO) and oil-extended solution SBR (S-SBR_ EO) compounds reinforced with silica/carbon black were investigated. Minimum and maximum torques of S-SBR_ EO compounds were much smaller than those of S-SBR_NO ones. Delta torques of S-SBR_NO compounds were greater than those of S-SBR_EO ones, and that of S-SBR_NO compound increased with increase in the 1,2-unit content. Optimum cure time ($t_{90}$) of S-SBR compound decreased with increase in the 1,4-unit content, whereas it increased with increase in the 1,2-unit content. Cure rate index of S-SBR compound increased with increase in the 1,4-unit content, whereas it decreased with increase in the 1,2-unit content. Comparing cure characteristics of S-SBR_NO and S-SBR_EO compounds with the same 1,2-unit content, $t_{90}$s of S-SBR_EO compounds were longer than those of S-SBR_NO ones and cure rate indices of S-SBR_EO compounds were smaller than those of S-SBR_NO ones.

• Restorative Dentistry and Endodontics
• /
• 제24권2호
• /
• pp.265-285
• /
• 1999

The purposes of this investigation were to observe the reaction kinetics of five commercial dual cured resin cements (Bistite, Dual, Scotchbond, Duolink and Duo) when cured under varying thicknesses of porcelain inlays by chemical or light activation and to evaluate the effect of the porcelain disc on the rate of polymerization of dual cured resin cement during light exposure by using thermal analysis. Thermogravimetric analysis(TGA) was used to evaluate the weight change as a function of temperature during a thermal program from $25{\sim}800^{\circ}C$ at rate of $10^{\circ}C$/min and to measure inorganic filler weight %. Differential scanning calorimetry(DSC) was used to evaluate the heat of cure(${\Delta}H$), maximum rate of heat output and peak heat flow time in dual cured resin cement systems when the polymerization reaction occured by chemical cure only or by light exposure through 0mm, 1mm, 2mm and 4mm thickness of porcelain discs. In 4mm thickness of porcelain disc, the exposure time was varied from 40s to 60s to investigate the effect of the exposure time on polymerization reaction. To investigate the effect on the setting of dual cured resin cements of absorption of polymerizing light by porcelain materials used as inlays and onlays, the change of the intensity of the light attenuated by 1mm, 2mm and 4mm thickness of porcelain discs was measured using curing radiometer. The results were as follows 1. The heat of cure of resin cements was 34~60J/gm and significant differences were observed between brands (P<0.001). Inverse relationship was present between the heat of reaction and filler weight % the heat of cure decreased with increasing filler content (R=-0.967). The heat of reaction by light cure was greater than by chemical cure in Bistite, Scotchbond and Duolink(P<0.05), but there was no statistically significant difference in Dual and Duo(P>0.05). 2. The polymerization rate of chemical cure and light cure of five commercially available dual cured resin cements was found to vary greatly with brand. Setting time based on peak heat flow time was shortest in Duo during chemical cure, and shortest in Dual during light cure. Cure speed by light exposure was 5~20 times faster than by chemical cure in dual cured resin cements. The dual cured resin cements differed markedly in the ratio of light and chemical activated catalysts. 3. The peak heat flow time increased by 1.51, 1.87, and 3.24 times as light cure was done through 1mm, 2mm and 4mm thick porcelain discs. Exposure times recommended by the manufacturers were insufficient to compensate for the attenuation of light by the 4mm thick porcelain disc. 4. A strong inverse relationship was observed between peak heat flow and peak time in chemical cure(R=0.951), and a strong positive correlations hip was observed between peak heat flow and the heat of cure in light cure(R=0.928). There was no correlationship present between filler weight % or heat of cure and peak time. 5. The thermal decomposition of resin cements occured primarily between $300^{\circ}C$ and $480^{\circ}C$ with maximum decomposition rates at $335^{\circ}C$ and $440^{\circ}C$.

• Elastomers and Composites
• /
• 제48권2호
• /
• pp.161-166
• /
• 2013

비등온 TGA 실험방법을 이용하여 가교 사이트가 서로 다른 chlorine cure-site ACM 고무와 carboxylic cure-site ACM 고무 두 종류에 대하여 열분해 거동을 연구하였다. 분해 반응이 최대인 점의 온도는 모든 승온 속도에서 carboxylic cure-site ACM 고무의 열분해 특성이 상대적으로 더 안정함을 보여 주었다. Kissinger의 해석 방법에 의한 활성화에너지는 chlorine cure-site ACM 및 carboxylic cure-site ACM 고무에 대하여 각각 118.6 및 105.5 kJ/mol로 나타났으며, Flynn-Wall-Ozawa의 해석방법에서의 전환율 0.1~0.2 범위의 평균과 유사한 값을 나타내었다. 반응차수 해석으로부터 두 시험편 모두 일반적인 고무와 유사한 다중 복합반응에 의하여 열분해 반응이 진행됨을 알 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.909-910
• /
• 2011

• Journal of the Korean Data and Information Science Society
• /
• 제10권2호
• /
• pp.445-455
• /
• 1999

We modify the Gompertz regression model for estimation of cure rates from pediatric clinical trials by assuming different hazard rates on the different periods. A treatment period may be divided by the stages of treatments under the different treatment arms. The piecewise Gompertz models provide an efficient method for estimation of the cure rates and a method for testing the difference of the treatment effects in the given interval.

• 공업화학
• /
• 제10권3호
• /
• pp.419-426
• /
• 1999

가황고무의 가황반응에 대하여 가황시스템 및 온도, 보강성충전제 첨가량 변화에 의한 반응속도상수 및 활성화에너지, 가교밀도 및 탄성상수, 가황특성 ($t_5,\;t_{90}$), 고무보강성 및 내마모성을 고찰하였다. 반응속도상수는 보강성충전제 첨가량, 가황시스템 및 가황반응온도에 대한 의존성이 크게 나타났으며, 반응온도에 따라 지수적으로 증가하였다. 활성화에너지는 가황시스템중 촉진제에 대한 황 비율이 높은 가황시스템에서 가장 작게 나타났으며, 보강성충전제 첨가량이 적을수록 작게 나타났다. 카본블랙 첨가량 변화는 고무보강성 및 내마모성에 직접적으로 영향을 미치고 있으나, 가황시스템 변화는 각기 다른 영향이 나타났다. 카본블랙 첨가량이 증가하면 모듈러스가 증가하고, 내마모성이 향상되며, 스코치시간이 짧아졌으나, 가교밀도 및 탄생상수는 감소하였다. 높은 가교밀도 및 탄성상수는 카본블랙 첨가량에 관계없이 촉진제에 대한 황 비율 0.73 (${\fallingdotseq}1$)에서 나타났으며, 스코치시간 ($t_5$)은 촉진제에 대한 황 비율 변화에 거의 영향을 받지 않는 것으로 나타났다. 빠른 최적가황시간 ($t_{90}$) 역시 촉진재에 대한 황 비율이 1에 가까운 조건 (=0.73)에서 나타났다. 가황조건별 배합고무의 등가 가황곡선계수는 카본블랙 첨가량에 관계없이 CC 시스템에 대해서는 0.96, SEC 및 EC 시스템에 대해서는 0.74로 나타났다. 한편 가황고무의 마모된 부피는 부과된 하중이 증가함에 따라 지수적으로 증가하였다.

• Composites Research
• /
• 제16권4호
• /
• pp.51-58
• /
• 2003

접착 조인트의 안전성은 사용되는 열경화성 접착제의 경화상태에 많은 영향을 받기 때문에, 실시간으로 접착 조인트의 경화를 모니터링 할 수 있다면 조인트의 품질을 향상시킬 수 있다. 본 연구에서는 조인트의 경화 중 접학제의 소산계수를 측정하여 이를 접착제의 경화도로 환산할 수 있는 기법을 제안하였다. 접착제의 소산계수와 경화도의 관계를 실험적으로 연구하였으며, 온도와 경화도에 따라 민감하게 변하는 소산계수로부터 온도가 미치는 영향을 제거하였다. 연구결과 접착제의 소산계수는 그 경화율과 유사한 경향을 보임을 알 수 있었다.

• 폴리머
• /
• 제26권6호
• /
• pp.728-736
• /
• 2002

The thermal and dielectric properties of unsaturated polyester resin system during cure were analyzed under Isothermal conditions. Both $varepsilon$′ and $varepsilon$" decreased and dipole relaxation was observed under isothermal conditions during cure. The ionic conductivity decreased linearly with the conversion according to the Kienle-Rate equation (ln($varepsilon$"$_{ionic}$we$_{0}$)=C$_{r}$$alpha$+C$_{0}$) up to $alpha$=0.15, after which it aparted from the relationship due to the entanglement of polymer chains. The effect of ionic conductivity was revealed to be larger than that of dipole motion during the whole cure through the electrical modulus analysis. Although dielectric motion was analyzed with Debye model, it was observed only at a narrow time region of middle stage of cure. In order to estimate the dielectric properties during the whole cure, the Havriliak-Negami model was considered and modified with the strong effect of ionic conductivity. The changes of $varepsilon$′ and $varepsilon$" were well estimated with this modified Havriliak-Negami model.

• Communications for Statistical Applications and Methods
• /
• 제24권6호
• /
• pp.605-625
• /
• 2017

This paper presents proportional odds cure models to allow spatial correlations by including spatial frailty in the interval censored data setting. Parametric cure rate models with independent and dependent spatial frailties are proposed and compared. Our approach enables different underlying activation mechanisms that lead to the event of interest; in addition, the number of competing causes which may be responsible for the occurrence of the event of interest follows a Geometric distribution. Markov chain Monte Carlo method is used in a Bayesian framework for inferential purposes. For model comparison some Bayesian criteria were used. An influence diagnostic analysis was conducted to detect possible influential or extreme observations that may cause distortions on the results of the analysis. Finally, the proposed models are applied for the analysis of a real data set on smoking cessation. The results of the application show that the parametric cure model with frailties under the first activation scheme has better findings.

• Elastomers and Composites
• /
• 제13권4호
• /
• pp.277-281
• /
• 1978

우수한 가황(加黃)지연제는 MBT와 빠른 속도(速度)로 반응(反應)하여 스코오치타임이 긴 가황촉진제(加黃促進劑)인 2-싸이클로헥실디티 오벤쪼티아쫄(CDB)을 생성(生成)한다. 이것은 CDB를 분리(分離)하여 고무에 배합(配合)한 후(後) 가황특성(加黃特性)을 측정(測定)함으르서 확인(確認)된 것이다. N-(싸이클로핵실티오)프탈이미드(CTP)와 같은 새로운 가황지연제는 가황중(加黃中) 싸이클로헥실폴리썰파이드(CPS)를 생성(生成)하며 이 CPS가 황(黃)을 공급(供給)할 수 없음으로 일부(一部)의 황(黃)이 낭비되므로 따라서 CTP를 사용(使用)할 때에는 추가(追加)의 황(黃을) 사용(使用)하여야만 만족(滿足)할만한 여러 물성치(物性値)를 갖춘 가황체(加黃體를) 얻을 수가 있다. CDB의 늦은 가황속도(加黃速度)를 인지(認知)하므로서 CTP와 같은 가황지연제를 사용(使用)할 때에 가황속도(加黃速度)가 늦는 이유(理由)를 이해할 수가 있는 것이다.