• 한국산학기술학회논문지
• /
• 제21권12호
• /
• pp.261-267
• /
• 2020

휴대용기기에 대한 경박단소 및 빠른 속도에 대한 요구는 반도체 패키징 기술에도 변화를 가져왔다. 이에 대한 대응의 하나로 stacked chip scale package(SCSP)가 업계에서 사용되고 있다. SCSP를 구현하기 위한 핵심소재 중의 하나가 die attach film(DAF)이다. 특히, 다이와 기판을 접착하거나 다이와 다이를 접착하는 경우, DAF의 접착필름은 기판의 단차나 본딩 와이어 사이를 기공의 발생 없이 채우기 위해 우수한 고온 유동성이 요구된다. 그러나 이 경우 경화 크랙의 발생을 최소화하기 위해 2단계 경화가 종종 요구되나, 공정시간 단축을 위해서는 1단계 경화가 바람직하다. 본 연구에서는 DAF 접착필름의 조성물을 경화 성분(에폭시 수지), 유연 성분(고무성분), 딱딱한 성분(페녹시수지, 실리카), 3개 군으로 분류하고, 조성물의 변화에 따른 1단계 경화시 경화 크랙, 고온 유동성, die attach (DA) 기공발생에 대한 영향을 혼합물 실험 설계법를 통해 살펴보았다. 경화 크랙은 딱딱한 성분 함량에 가장 크게 영향을 받았으며, 함량이 증가할수록 경화 크랙이 감소하였다. DA 기공의 발생은 딱딱한 성분의 함량이 감소할수록 감소하였으며, 특히, 딱딱한 성분의 함량이 적은 경우는 경화 성분의 함량이 감소할수록, 기공의 발생이 억제되었다. 고온 유동성은 100℃ 저장탄성 계수와 120℃에서의 블리드 아웃(BL-120)으로 평가되었다. 100℃의 고온 저장탄성률은 딱딱한 성분의 감소가 중요하였고, 유동성 지표인 BL-120의 경우는 경화 성분의 함량의 증가와 딱딱한 성분의 감소가 동시에 중요하였다.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권6호
• /
• pp.519-527
• /
• 1997

The micro crack was occurred where the stress concentrated by the thermal stress which was induced during the cooling period after molding process or by the various reliability tests. In order to estimate the possibility of development from inside micro crack to outside fracture, the fracture toughness of EMC should be measured under the various applicable condition. But study was conducted very rarely for the above area. In order to provide a was to decide the fracture resistance of EMC (Epoxy Molding Compound) of plastic package which is produced by using transfer molding method, measuring fracture is studied. The specimens were made with various EMC material. The diverse combination of test conditions, such as different temperature, temperature /humidity conditions, different filler shapes, and post cure treatment, were tried to examine the effects of environmental condition on the fracture toughness. This study proposed a way which could improve the reliability of LOC(Lead On Chip) type package by comparing the measured $J_{IC}$ of EMC and the calculated J-integral value from FEM(Finite Element Method). The measured $K_{IC}$ value of EMC above glass transition temperature dropped sharply as the temperature increased. The $K_{IC}$ was observed to be higher before the post cure treatment than after the post cure treatment. The change of $J_{IC}$ was significant by time change. J-integral was calculated to have maximum value the angle of the direction of fracture at the lead tip was 0 degree in SOJ package and -30 degree in TSOP package. The results FEM simulation were well agreed with the results of measurement within 5% tolerance. The package crack was proved to be affected more by the structure than by the composing material of package. The structure and the composing material are the variables to reduce the package crack.ack.

• Elastomers and Composites
• /
• 제41권2호
• /
• pp.79-87
• /
• 2006

내소음성과 내균열성을 가진 고무재료의 개발을 목적으로 NBR에 oleamide와 아라미드를 첨가하여 함량에 따른 가황특성, 물리적 성질, 내열성, 내유성, 내마모성, 내균열성 및 내소음성을 조사하였다. 가황특성과 Mooney 점도를 측정한 결과, 미가황고무의 가황특성은 oleamide의 양이 증가할수록 torque가 감소하였다. oleamide의 함량이 3 phr까지 증가함에 따라 경도 및 모듈러스 값은 조금씩 감소하였고 신장률은 감소하는 경향을 나타내었으며 인장강도는 거의 변화가 없었다. 내열성 시험(70시간, $120^{\circ}C$) 및 내유성 시험(70시간, $40^{\circ}C$)을 수행한 결과. 인장강도와 신장률이 모두 감소하였으며, TGA/DSC 분석 결과 첨가제에 따른 배합고무재료의 열적특성은 변화가 없었다. 기본물성, 내마모성, 내소음성 및 내균열성을 종합한 결과, NBR 227001 고무재료에서 내마모성과 내소음성에 대한 oleamide의 최적배합비는 3 phr였으며, 내균열성에 대한 아라미드의 최적배합비는 1 phr로 나타났다.

• Macromolecular Research
• /
• 제9권6호
• /
• pp.319-326
• /
• 2001

Fatigue crack growth (FCG) behavior of natural rubber/ethylene-propylene-diene rubber (NR/EPDM) blend vulcanizates under dynamic tearing condition was investigated by using a fracture mechanics approach. It appeared that variation of crack growth rate with blend compositions was dependent on the level of imposed tearing energy G. At low tearing energy region, the FCG rates of the blend were lower as the EPDM content was increased, while at high tearing energy region, the trend was reversed. Over the measured range of tearing energy G, all blend compositions showed the lower crack growth rates compared to the average of properties of component elastomers. When the blends were thermally aged, the fatigue resistance of the blends was deteriorated in proportion to the concentration of EPDM phase. Fatigue crack growth behavior of the blends was supposed to be associated with the inhomogeneities of the crosslink structure of the blends arising from cure incompatibility of the EPDM and NR when they are sulphur cured.

• Composites Research
• /
• 제23권4호
• /
• pp.21-27
• /
• 2010

대부분의 구조물 파괴는 피로에 의해서 발생한다. 따라서 지금까지 모드 혼합비가 피로 특성에 어떤 영향을 미치는지에 대한 수많은 연구가 수행되어 오고 있다. 하지만 대부분의 연구가 금속/금속 계면이나 복합재료 층간 분리에 관한 연구이다. 따라서 본 연구에서는 이종재료인 복합재료/금속 계면의 피로 특성에 대한 기초 자료를 얻고자 하였다. 이를 위하여 복합재료와 탄소강을 동시 경화법을 이용하여 접합한 SLB(single leg bending) 시편을 이용하여 피로 실험을 수행하였다. 특히, 피로 특성에 모드 혼합비$(G_{II}/G_T)$가 어떠한 영향을 미치는지에 대해 알아보고자 하였다. 전체적으로 모드 II 하중 성분 이 많을수록 균열진전속도가 빨라진다는 결과를 얻었다.

• 한국해양공학회지
• /
• 제9권1호
• /
• pp.111-119
• /
• 1995

The elastic-plastic fracture toughness($J_{IC}$) and fracture resistance (J-R curve) of SA508-3 alloy steel used for nuclear reactor pressure vessel are investigated by using CT-type specimens. Fracture toughness tests are conducted by unloading compliance method and multiple specimen method at room temperature, -2$0^{\circ}C$ and 20$0^{\circ}C$. The apparent negative crack growth phenomenon which usually arises in partial unloading compliance test is well known. The negative crack growth phenomenon in determining J sub(IC) or J-R cure from partial unloading compliance experiments may be eliminated by the offset technique. In this study, the evaluation of $J_{IC}$ multiple specimen method recommended by the JSME gives the most reliable results by using half-size CT(similar-type) specimens.

• 산업기술연구
• /
• 제26권A호
• /
• pp.139-146
• /
• 2006

Many concrete bridge decks develop transverse cracking shortly after construction. These cracks accelerate corrosion of reinforcing steel and lead to concrete deterioration, damage to components beneath the deck, unsightly appearance. These cracks shorten the service life and increase maintenance costs of bridge structures. In this study, VES-LMC overlay, which provides the same benefits as a conventional overlay, is designed to cure very quickly. Although the materials for VES overlays are more expensive, the cost is more than offset by the savings on traffic control and work zone safety measures. Otherwise, reaction of hydration occurs very rapidly in beginning step(concrete placing). As a results, thermal cracking can be occur by thermal stress in accordance with hydration-heat The purpose of this study was to estimate diagnosis of crack occurrence of VES-LMC through field tests at early-age.

• Elastomers and Composites
• /
• 제29권2호
• /
• pp.121-130
• /
• 1994

The physical properties of rubber blend between natural rubber(NR) and ethylene propylene diene terpolymer(EPDM) were investigated as a study of EPDM composite materials. For EPDM/NR blends, the effects of ethylene and diene contents in EPDM, blend ratio, dicumyl peroxide(DCP) curing system on the physical properties, interfacial adhesion force and dynamic crack growth etc. were studied. EPDM/NR blends loaded with carbon black were prepared by mechanical mixing and cured by plate heating cure press. Crosslinking density was measured by swelling method with toluene. The physical properties of all blends were measured with Instron, fatigue to failure(FTF), Demattia flex cracking tester(DMFC), scanning electron microscopy (SEM), etc. As the ethylene and diene contents in EPDM increased, the physical properties, such as dynamic crack growth, adhesion to other component were increased too. Interfacial adhesion force of EPDM/NR blends to dissimilar layer was improved by the use of optimum peroxide curing system.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(2)
• /
• pp.336-343
• /
• 1998

An iteration method has been developed for determining crack growth and fracture resistance cure (J-R curve) from the load versus load-line displacement record only. In this method, the hardening curve, the load versus displacement curve at a given crack length, is assumed to be a power-law function, where the exponent varies with the crack length. The exponent is determined by an iterative calculation method with the assumption that the exponent varies linearly with the load-line displacement. The proposed method was applied to the static J-R tests using compact tension(CT) specimens, a three-point bend (TPB) specimen, and a cracked round bar (CRB) specimen as well as it was applied to the quasi-dynamic J-R tests using CT specimens. The J-R curves determined by the proposed method were compared with those obtained by the conventional testing methodologies. The results showed that the J-R curves could be determined directly by the proposed iteration method with sufficient accuracy in the specimens from SA508, SA533, and SA516 pressure vessel steels and SA312 Type 347 stainless steel.

• 한국환경과학회지
• /
• 제13권4호
• /
• pp.421-427
• /
• 2004

With the help of mechanical mixing method such as Banbury mixer and open 2 roll mill, ethylene propylene diene terpolymer (EPDM) was blended with the chloroprene rubber (CR) then mechanical properties and ozone resistance test of blends were subsequently investigated. It was noted that the hardness increased with an increasing of CR contents. Generally the hardness was increased with heat aging time most likely due to the post cure. In ozone resistance test of blend, after 8 hours a portion of fine crack is obtained for pure CR. It is confirmed that ozone resistance is greatly improved by addition of 25wt% EPDM to CR.