• Elastomers and Composites
• /
• 제51권3호
• /
• pp.212-217
• /
• 2016

Influence of poly(ethylene-co-vinyl acetate) (EVA) types and cure systems on cure characteristics of foaming EVA compounds were investigated. Three kind EVAs with different VA contents were employed. Influence of triallyl cyanurate (TAC) and dicumylperoxide (DCP) content on the cure characteristics were examined. The minimum torque ($T_{min}$) and delta torque (${\Delta}T$) decreased as the VA content increased. The ${\Delta}T$ was increased by adding TAC and by increasing the DCP content. For the foaming EVA compounds without TAC, the cure times such as the minimum cure time ($t_{min}$), scorch time ($t_2$), and optimal cure time ($t_{90}$) did not show a specific trend according to the DCP contents. For the foaming EVA compounds containing TAC, the cure times decreased as the DCP content increased. From the experimental results, it was found that efficienct DCP/TAC ratio for improvement of the crosslink density was 1.1~2.0.

• 반도체디스플레이기술학회지
• /
• 제19권1호
• /
• pp.29-35
• /
• 2020

The cure characteristics of three kinds of naphthalene type epoxy resins(NET-OH, NET-MA, NET-Epoxy) with a 2-methyl imidazole(2MI) catalyst were investigated for preparing sheet epoxy molding compound(SEMC) for wafer level package(WLP) applications, comparing with diglycidyl ether of bisphenol-A(DGEBA) and 1,6-naphthalenediol diglycidyl ether(NE-16) epoxy resin. The cure kinetics of these systems were analyzed by differential scanning calorimetry with an isothermal approach, and the kinetic parameters of all systems were reported in generalized kinetic equations with diffusion effects. The NET-OH epoxy resin represented an n-th order cure mechanism as like NE-16 and DGEBA epoxy resins, however, the NET-MA and NET-Epoxy resins showed an autocatalytic cure mechanism. The NET-OH and NET-Epoxy resins showed higher cure conversion rates than DGEBA and NE-16 epoxy resins, however, the lowest cure conversion rates can be seen in the NET-MA epoxy resin. Although the NETEpoxy and NET-MA epoxy resins represented higher cure reaction conversions comparing with DGEBA and NE-16 resins, the NET-OH showed the lowest cure reaction conversions. It can be figured out by kinetic parameter analysis that the lowest cure conversion rates of the NET-MA epoxy resin are caused by lower collision frequency factor, and the lowest cure reaction conversions of the NET-OH are due to the earlier network structures formation according to lowest critical cure conversion.

• Macromolecular Research
• /
• 제9권3호
• /
• pp.157-163
• /
• 2001

The influences of carbon black loading and cure type on the cure characteristics including kinetics and dynamic mechanical properties were investigated for a styrene-butadiene rubber (SBR). The rate constants of accelerated sulfur vulcanization reaction at three different temperatures were determined using a cure rheometer, and they were compared with those from the direct measurement of sulfur concentration. The strain softening behavior under dynamic deformation, known as the Payne effect was also discussed depending on the carbon black loading and cure type.

• Elastomers and Composites
• /
• 제50권2호
• /
• pp.87-91
• /
• 2015

Cure characteristics of non-oil-extended solution SBR (S-SBR_NO) and oil-extended solution SBR (S-SBR_ EO) compounds reinforced with silica/carbon black were investigated. Minimum and maximum torques of S-SBR_ EO compounds were much smaller than those of S-SBR_NO ones. Delta torques of S-SBR_NO compounds were greater than those of S-SBR_EO ones, and that of S-SBR_NO compound increased with increase in the 1,2-unit content. Optimum cure time ($t_{90}$) of S-SBR compound decreased with increase in the 1,4-unit content, whereas it increased with increase in the 1,2-unit content. Cure rate index of S-SBR compound increased with increase in the 1,4-unit content, whereas it decreased with increase in the 1,2-unit content. Comparing cure characteristics of S-SBR_NO and S-SBR_EO compounds with the same 1,2-unit content, $t_{90}$s of S-SBR_EO compounds were longer than those of S-SBR_NO ones and cure rate indices of S-SBR_EO compounds were smaller than those of S-SBR_NO ones.

• 대한한의학원전학회지
• /
• 제28권3호
• /
• pp.45-65
• /
• 2015

Objectives : Holsaye, the doctor responsible for the King's health, explained about ways to comfort body and mind and not get diseases for long life ("Yangsaeng") and about food in Eumsunjungyp which was a dietary cure book compiled and published in the Yuan Dynasty. This study examined about what the definition of Yangsaeng, introduced by a doctor from a different country, and the characteristics of the ways in treating the sick with Yangsaeng and food in the Yuan dynasty. Methods : This study used Eumsunjungyo from the China Chinese Medicine Publisher as its method. It analyzed the organization and the characteristics of the contents of Eumsunjungyo, and compared with Korea's first dietary cure book Singnyochanyo("食療纂要"). Results : Eumsunjungyo is a dietary cure book written by a doctor in the Yuan Dynasty. It suggested different ways of Yangsaeng according to specific patients and purposes, and explained the importance of food. Singnyochanyo is a dietary cure book written by a doctor in the Joseon Dynasty. It suggested ways to cure each of categorized diseases using foods. Conclusions : Eumsunjungyo is a dietary cure book written in 1330 to which the unique food culture of the people in other countries applied. Singnyochanyo written in 1460 is a kind of dietary cure book as well, but it categorized foods for each disease and revealed characteristics as an emergency care. However, Eumsunjungyo stressed health management through Yangsaeng and foods throughout the whole life.

• Composites Research
• /
• 제14권1호
• /
• pp.30-38
• /
• 2001

복합재료는 우수한 비강성, 비강도 특성 때문에 기존의 항공우주산업뿐만 아니라 로봇 팔. 공작기계 등에 널리 사용되고 있다. 복합재료 경화중의 온라인 모니터링기법은 생산성 향상 및 품질의 신뢰성 향상을 위하여 매우 중요한 연구분야로 대두되고 있다. 본 논문에서는 휘스톤 브리지식 유전회로를 설계하고 제작하였다. 또한 고온 경화 복합재료에 적용할 수 있는 고온 유전센서를 개발하여 그 성능을 평가하였다. 유한요소해석을 이용하여 유전 센서에 작용하는 열 잔류응력을 계산하였으며, 고온분위기 하에서 유전센서의 유전특성을 평가하였다. 이상에서 개발된 유전회로와 고온 유전센서를 이용하여 BMI(Blsmaleimlde) 수지의 경화모니터링을 수행하였다.

• Macromolecular Research
• /
• 제17권8호
• /
• pp.585-590
• /
• 2009

The cure behaviors, dielectric characteristics and fracture toughness of diglycidylether of bisphenol-A (DGEBA)/poly(ethylene terephthalate) (PET) blend system were investigated. The degree of conversion for the DGEBA/PET blend system was measured using Fourier transform infrared (FTIR) spectroscopy. The cure kinetics were investigated by measuring the cure activation energies ($E_a$) with dynamic differential scanning calorimetry (DSC). The dielectric characteristic was examined by dielectric analysis (DEA). The mechanical properties were investigated by measuring the critical stress intensity factor ($K_{IC}$), critical strain energy release rate ($G_{IC}$), and impact strength test. As a result, DGEBAIPET was successfully blended. The Ea of the blend system was increased with increasing PET content to a maximum at 10 phr PET. The dielectric constant was decreased with increasing PET content. The mechanical properties of the blend system were also superior to those of the neat DGEBA. These results were attributed to the increased cross-linking density of the blend system, resulting from the interaction between the epoxy group of DGEBA and the carboxyl group of PET.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.38-41
• /
• 2000

High temperature cure characteristics of polyester resin systems were investigated by isothermal and dynamic differential scanning calorimetries. During isothermal scanning, the experimental procedure was modified to reduce the initial Boss of heat. no kinetic equation from the isothermal experiment was compared with that from the dynamic experiment.

• Elastomers and Composites
• /
• 제35권3호
• /
• pp.215-226
• /
• 2000

고무 조성비가 다른 카본블랙으로 보강된 고무 배합물의 가황 특성을 연구하였다. 한 가지 고무로 이루어진 고무 배합물, 두 가지 고무로 이루어진 고무 배합물, 그리고 세 가지 고무로 이루어진 고무 배합물을 실험 대상으로 삼았다. NR/BR과 SBR/BR 배합물 중에서 BR의 함량이 높은 것의 델타토크는 단일 고무 배합물의 경우보다 높다. 삼중 고무 배합물의 델타 토크의 경우에는 세가지 고무의 함량비가 유사할수록 델타 토크가 낮아졌다. 스코치 시간과 적정 가황 시간은 NR이 증가할수록 빨라졌고 SBR이 증가할수록 느려졌다. 가황 속도는 SBR 함량이 증가할수록 느려졌다. 가교 역전(reversion) 현상은 SBR 함량이 증가할수록 감소하였다.

• Elastomers and Composites
• /
• 제47권3호
• /
• pp.254-258
• /
• 2012

자동차 엔진 개스킷용 아크릴 고무(ACM)의 재료 특성과 수명 예측에 관하여 연구하였다. 클로린 가교사이트를 포함하는 ACM (Chlorine Cure-Site ACM)과 카르복실기 가교사이트를 포함하는 ACM (Carboxyl Cure-Site ACM)을 이용하여 최적상태의 배합물을 제작하여 특성을 살펴보았다. 엔진용 개스킷의 주요한 특성인 열과, 엔진오일에서의 압축영구줄음율을 시험 평가한 결과 Carboxyl Cure-Site ACM 배합물이 상대적으로 더 우수한 것으로 나타났다. Carboxyl Cure-Site ACM 고무 재료에 대한 수명을 예측하기 위해 가속열노화시험을 수행하여 시간-온도 환산식인 아레니우스(Arrhenius) 관계식을 구하였다.